Do not throw away foam gun! Disassembly cleaning, ball removal. Do-it-yourself modernization
Ғылым және технология
💥The foam gun is a household and professional tool that allows you to control the flow of sealant. It is the gun that facilitates the process of applying mounting foam.
How does a foam gun work?
Pictures on demand foam gun repair
The pistol consists of a body part to which the barrel and handle are attached by a threaded connection. A nozzle is located at the end of the barrel, an axially located needle rod is crimped inside, connected to a trigger handle.
Why isn't foam coming out of the gun?
Mounting foam does not completely come out of the cylinder
The cause of the pressure drop may be a leak in the valve, which gradually bled off part of the propellant gas, or too low temperature of the cylinder. In the second case, the problem is solved by heating the cylinder. The presence of a clot in the balloon that clogged the valve.
How to clean a foam gun?
Pictures on demand foam gun repair
How to clean a dry foam gun?
Clean the debris from the outside of the barrel. This can be done with a knife, but you need to use it very carefully, avoiding damage to the mechanism.
Lower the gun down and put some solvent into the barrel at the base. ...
Wait a couple of minutes and try pulling the trigger.
Can I leave the gun with foam?
If the gun is in good condition and sealed, the cylinder attached to the gun can be left in place for one to two weeks. To prevent unintentional triggering of the gun, it is recommended to close the safety screw.
Why remove the ball from the foam gun?
Pictures on demand
The ball must be removed so that it does not freeze in the valve after work. This ball is necessary so that when changing the cylinder, the residual foam in the barrel does not “pearl” back. But there is still a spring, which will polymerize over time, even if you use flushing fluids, as a result, the ball dries up and "stands up"
▶️ All videos of my channel are HERE / korobahashop
=================================
Join us on social networks!
✅ / chudo__obzor
✅t.me/chudoobzor
=================================
Unpacking, #review, tests, #repairs, #homemade. Exchange of experience about shopping in foreign online stores, give the viewer the opportunity to look at the product in detail.
Glad new adequate subscribers with similar views!
===============================================
The best gratitude from you will be to subscribe to the channel and like, thank you all!
Пікірлер: 25
❤Thank you❤
hero 🏆
Thank you!
@miraclereview
2 ай бұрын
🤝👍😉
Excelente!! 👍👍
So....cleaning the gun is disassembling the gun removing the ball and putting it back together?🤔
What size open end wrench did you use to take off the barrel?
@miraclereview
Күн бұрын
14
👏👏👏👏👏👏
@miraclereview
Жыл бұрын
👌
O çivi ile çıkardığı bilyeyi mi temizlemek lazim
@MsAsiret
Жыл бұрын
Yazıda ne diyor anlamadim abim
@miraclereview
Жыл бұрын
@@MsAsiret videonun altında altyazı dilinizi seçmeyi deneyin
Those stay there all day
Why is the ball no longer needed?
@miraclereview
Жыл бұрын
🤔)
@ducuBAR
Жыл бұрын
@@miraclereview i am also curious why the ball is no longer needed. Thank you for the video!
@hornetIIkite3
Жыл бұрын
The ball is to close off the foam can and prevent backflow. If you use the whole spray can in one day you might get away with removing the ball. Otherwise I would recommend keeping the ball in place.
@AlanS_DGC
4 ай бұрын
@@hornetIIkite3thank you for detail. I was wondering as well. Seemed like an important part.
@remus097
11 күн бұрын
The question is why is the ball needed in the first place. Is it?!
Mine doesnt open anymore
@nicolaecioaca8870
5 ай бұрын
Salutare. Cu pistolul pe tub care nu este gol, cum se desfundă ? Sănătate maximă.
Круто, кста зачем эти вставки на английском?
@miraclereview
Жыл бұрын
Согласен, такая информация мне тоже не понравилась)
@dj2slicc
Жыл бұрын
cause niggas like me need to see this