Sometimes the homemade ones can work better than the pricey ones ! Thanks for sharin the info! GOD Bless

@pestcemetery

10 жыл бұрын

As long as it can deliver the air and product in a clean and powerful enough manner to "mist" out of the laser slits in the target area--you are right. Thanks for the Blessing-- Agape

Great video, thanks for sharing!

Thanks for the video. The comment from BugKiller makes it seems like if there is a special liquid pest control to pump in the tubing. Can you elaborate on that? What liquid do you advise to use?

Can you use an electric compressor, like for pumping up tires? If so, what is the appropriate pressure for the wall tubes?

Watched your videos there great but can you tell me where I can get the keys for the tube box Thank you

Omg this video is so helpful. I am not so handy, how can I get the cylinders with the gun attached to buy? I can attempt creating mine but I will need details on where to get the materials and how to put them together. Please help.

Jerry, I need to build one, so may be you can send me information for the parts and equipment. Thanks

Please tell me where I can find the tips I need to replace mine

Hello, Great video. I am trying to build one of these myself, but cant seem to come up with a source for the gun. Any suggestions? Just need a source. Thanks. Paul

Robert could you please send me the list of components I would need to build my own sprayer to spray my tubes in the wall I think its great to do it yourself I get tired of paying extremely high service call much appreciated

Wow what a great video! I really want to do this myself but the pest control companies refuse to give me any direction how to use my home system or sell me any tools. I'm in the process of making a home made model myself using compressed nitrogen w/ an old refrigerant manifold. What psi do you pressurize your air to? Where can one buy those tips? (Im planning on using a modified pin needle nozzle from my air compressor but that may not work so well)

Thanks for the video! I hope to make something similar.

hi jerry, im in tx...nvr used the taex system for 6years....will it work , will it clogg b/c i nvr used it? also, people tell me, when i use it bugs will come thru the outlet and will render me with a bigger problem? thank you sir!

Where can I find that dual gun you have?

I can't find the tips for the trigun injector, Does anyone know who has them? Looked for Whitmire, nothing.

Built one for around $125.00. Some parts I had, some bought. Used a 5 gallon air tank and did all the plumbing. No regulator though, found it it's really not necessary if you limit you air pressure between 30 and 40 PSI. The tubes at my house are small so the compressed air goes a long way. I fill the thing by first putting the tank in a vacuum and sucking the liguid from a gallon container. Again a little plumbing work and fittings goes a long way. Just used it the first time without a hitch. I can carry it around and spray the outside of the house as well since it's very compact and light. A lot of thought went into this to make it inexpensive, effective and light to carry. All fittings are brass, the tank itself is steel and may have to be replaced down the line but for $25, who cares.

@RobertWave

9 жыл бұрын

Daniel Knox Hey, I wouldn't mind however. I have built a revised edition made out of PVC. I would be glad to share pics as well as parts used. It's regulated. The newer one works better and don't have to worry about rust. The PVC must be the original type, it has a burst pressure of around 700PSI. I still use a vacuum pump to charge the unit with liguid. I use around 50PSI regulated and 100PSI in the air tank. It's enough to do the house and spray the perimeter as well....about a gallon of chemical. I do my house as well as the two of my childrens houses and the results so far are stellar. The unit is light, it can be carried around. no need for a hand truck or separate tanks....it's all one piece. If you want to post your e-mail, I'll send info.

@RobertWave

9 жыл бұрын

Daniel Knox On it's way.....

@RAMpage8788

9 жыл бұрын

Robert W Hello, can you send me the info for this? My email is shaggs87us@gmail.com Thank you!

@elliotjesch3682

9 жыл бұрын

Would you mind sharing your plans?

@RobertWave

9 жыл бұрын

Elliot Jesch Post your e-mail, I would be happy to send you what I sent the others.

Do u know anybody selling these type of pump?

I can’t find the dual gun. Where did you get that?

How much bug juice per hose...please.

I've been trying to look for the nozzle. Would you happen to have a link to where I can purchase 1? I think I can use my existing air compressor to build something that would work like this. Thanks for this video.

@pestcemetery

9 жыл бұрын

The place I buy mine would rather not sell to homeowners so they asked me not to share link... You could cut the end off a air stem for filling balls like a football,volleyball etc. You should already have the gun that goes with a compressor --just a thought

From where can I buy the machine in texas. thanks

Are they gun shots in the background???

Can you please give me the website or store name so I can purchase me one of those units? Thank you.

1.) Where can I purchase the dual gun and spray nozzle? 2.) Where can I purchase the entire spray system (excluding 5 lbs air bottle), with cart?

what is that noise that pops off at the 1:29 mark....was expecting to hear sirens after that....

What pesticide do you use to run through it that won't clog it? I was going to use the home defense from lowe's since I've had the best luck with it. Also can I run nitrogen through the lines instead of air? Or bad idea?

@KurtWagner702

Жыл бұрын

You can use nitrogen, as a former employee for HomeTeam. that’s what we used.

With respect to the pesticide, can one use Fipronil (Tarus SC or Termidor)? I am currently digging and making the perimeter moat, but would like to pump some of this in the walls just in case. Not too worried about the other bugs. Worried about clogs in the system. Any thoughts on a tube flush after the pesticide? Also, what can I use to pop off the Taexx cover?

@jaimehernandez5791

Жыл бұрын

We can exchange some knowledge here lol. I want to DIY my pest control and I need to know what is best for spiders, I have a pond behind my house and the perimeter of my home is full of spiders. I also have the Taexx system. First of all do not use CO2 is Carbon Monoxide and could be slightly toxic to be introduced inside the home. You can use Nitrogen at 180psi. 7 seconds spray with pesticide will be good for a 40 to 60 length of tubing or per tubing. After injecting the pesticide, add 10 seconds of nitrogen gas to eliminate all residue chemical left inside the tubing and preparing it for the next injections. For removing the Taexx cover just use a needle pliers and turn it carefully to not damaged

@gman4dx266

Жыл бұрын

@@jaimehernandez5791 first of all, CO2 is carbon dioxide which is what you breath out when you exhale. the "Di" in dioxide means two. Monoxide is 1 (like Mono) so carbon monoxide like from a cars exhaust is CO

What kind of gun is that I have been doing GHP for 35 years and have never seen one like that

@pestcemetery

5 жыл бұрын

System 3 old aerosol applicator

I apologize if you answered this already but what amount of pesticide do you add to each line/individual port?

@pestcemetery

7 жыл бұрын

There are two or three different tube sizes. But 6-8 second shots should do.

@nathanweidner2323

7 жыл бұрын

About how many oz or ml would you say? Thanks for all your help and insight.

I am in the process of making a DIY machine....what do you call the gun? Where could I find one on line?

@pestcemetery

9 жыл бұрын

Washer Dryer it's a 'system 3' gun...made for aerosol applications but works well

@fiatr.5472

6 жыл бұрын

Is that a tip on your gun a considered a termite tip? I wasn't able to find anything searching for system 3 gun. Thanks for your help

@dbaderia

6 жыл бұрын

I'm having a hard time trying to find this 'System 3' gun. Where can I purchase this from?

How often should you spray?

@pestcemetery

8 жыл бұрын

Once every three months should work

@channeldiali

4 жыл бұрын

Twice a year, the end of September and the end of march

robert, can you send me one you built?

@pestcemetery

9 жыл бұрын

Sudhir Desai Sorry-- I only shared this to give an idea on how..... I don't sell them

what is the total psi coming out of your 5lb tank ?

@pestcemetery

8 жыл бұрын

+Michael Marshalek Regulator has it at 150---but 85 if you can get it will work

@michaelmarshalek2907

8 жыл бұрын

great thank you

Gun shoots?

Can any pest company who has this equipment use the tubes in the wall? I've been told only one company has access to the tubes in the walls of my home?

@Daddydollars

7 жыл бұрын

luke c yes any company can. it belongs to you. you chose who can use it

@randomh3ro1613

2 жыл бұрын

@@Daddydollars false its patented by hometeam and they are the only ones allowed to use it unless you want to void any warranty.

I am not sure what you are trying to accomplish with this video other than jeopardizing your livelihood and other businesses that spend a lot of money installing these systems in homes. Do you install the tubes in homes? If you did you would now that pest control companies have to pay franchise fees to use the systems and usually put them in at there expense hoping the home owner will go on service so they can recover there investment. You can not just throw any chemical in the tank either some formulations will clog the tubes up instantly if you do not know what to use.

@MrRenosis

8 жыл бұрын

If companies are putting in products at a loss in the hopes of getting later service contracts, then that is a risk they take. Charge more for the installation. If a home user wants to use the system that he paid for, without paying some company, the more power to him. Why should anyone limit their self because some business made a decision to install something at a loss. Build into the price of installation the potential loss to DIY type customers, don't try to silence the spread of knowledge!

@pestcemetery

8 жыл бұрын

+Bug Killer If you mean by "a lot of money"--less than $200 only to turn around and bully the homeowner into using their service only at inflated prices meanwhile threatening other companies who bought machines that they are not allowed to use them.... ok....

@Lala-qe5wt

4 жыл бұрын

@@pestcemetery Completely disagree with you on this one, if you created the the system patent and then someone rode off your coat tails without paying you one penny I'm sure you wouldn't be happy about that. I'm like you a small business owner but we need to know our limits and respect the powers that be. YOU should be telling customers the truth as a regular conventional treatment should handle the issues at hand.

@Mcleanbe123

3 жыл бұрын

@@Lala-qe5wt that would be similar to ibm complaining about dell, hp, compaq and countless others that broke the BIOS code and created windows PC's