I'm so happy I found this!! I Just ordered one! Looking forward to less backbreaking work and the efficiency it's going to provide !!

Hey Phillip, sorry to bother you with this but, how did you programmed the 2 mode button to keep the horizon? I just got my ronin-s and in the app, I get to the mode's menu but I can't find where to put it only in horizon without holding down the Trigger Button. Thanks in advance.

So, the advantage of this mount is that I think you can also mount the Smallrig mount right above it for an insane amount of mounts...not to mention that you can mount an additional two more handle grips on the sides of the Smallrig mount. To be honest, this is definitely a must have if you don't have something already connected to the side of the Ronin S.

@PhillipSkraba

3 жыл бұрын

Yes, you have a couple of coldshoe mounts, you can mount other rigs around it. It's with no doubt my most used Ronin S accessory.

Bro, awesome review as always - I have Dual IS stabilisation on both my Panasonic GH5 & Lens so was wondering if I can leave this turned on when mounted to this gimbal or does Dual IS have to be turned off? Cheers

thank you very much for this video... very helpful n by far the best vid out there for this

@PhillipSkraba

4 жыл бұрын

Farouk Zanou You’re welcome! I’m glad it helped, it’s an excellent tool.

What do you do to cover the contact that has been exposed when you take out dji cover in order to screw the PGYTECH base part.

@PhillipSkraba

4 жыл бұрын

I haven't done anything, but if you're worried about it just get some Gorilla Tape on that sucker!

I'm a new ronin S owner. Just put in an order for this attachment. Got a question for you regarding when you were doing your quick motion demo at the start. What settings do you have to be able to achieve the quick "standard grip" to flashlight/underslung transition without actually pressing the trigger at all during the process?

@PhillipSkraba

2 жыл бұрын

So that was basically horizon level mode, it just holds the horizon no matter what I do. Damn, you just reminded me I should charge my Ronin S and see if it still works!

Absolutely Brilliant. Thank you!

@PhillipSkraba

3 жыл бұрын

You're welcome! Thank you!

i just bought now, thanks!!

@PhillipSkraba

4 жыл бұрын

You're going to love it, it's an excellent add-on!

Great video, thanks - I'm looking for an extension to my Ronin-S so I can add an Andycine HDMI monitor - would this mount do the job and if not, any suggestions will be most appreciated..

@PhillipSkraba

3 жыл бұрын

Yes it would, no problem with that.

Brat, can you do a comparison video on all your gimbals - I currently have this one (Ronin S) and RS-2 and am thinking of selling one for the RS-3. Personally, I just love the sturdiness or the Ronin S and with some added accessories - it just provides the best experience. Your thoughts?

Wow! Thanks man for sharing this! We're definitely getting one ASAP. We just wish we had it already for tje shoot we have in a couple of days, haha. But really, since the zhiyun webill s came out, we were so jealous of the way you can configure the handle... But this allow us to do exactly that with our ronin s and get more low angles, which are a total pain to get unless you are as strong as Hulk! Best

@PhillipSkraba

4 жыл бұрын

You're welcome! Yes, this is the same reason I got this awesome gadget! It's really great to use and you can get some fantastic shots without needed the strength of the Hulk! I love it, and it's so compact!

Okay, just an update. I purchased the upgraded model that has the dovetail instead of the thumb wheel attachment and I have to say, it takes a simply great product to an orgasmic level, lol. The reason I switched is the thumb wheel was slightly in the way of the mode lights on the Ronin S (yes, I know that's anal), and the new version solves this. Also, the way it clicks in, has a little spring loaded pin that retains it even when loose (until you release it) and a 1/4 turn on a lever, that MATCHES the Ronin levers (yes again, anal), ooohhh, maaan... You might not like it though because the retaining pin is not symmetrical so it is only meant to attach the one way unless you switch sides on the gimbal, so no tipping the handle upside down, I think. Later! 👽🛸

@PhillipSkraba

3 жыл бұрын

haha, I love tipping it upside down like a crazy fool! I've been thinking about it, but with the RS2 around the corner, I'm saving all my pennies for that! If it's crap, I'll get myself the handle, for sure 😂

works and looks wonderful

@PhillipSkraba

2 жыл бұрын

It does, awesome product!

Woaw that was really helpful, you are amazing! Have a nice Day, and i did subscribe 🔥

@PhillipSkraba

3 жыл бұрын

Thank You! I really appreciate the sub, have a great day!

How's the handle when its mounted the other way (upside down)? Enough room for your hand or does your knuckles hit the metal arm of the ronin-s?

@PhillipSkraba

3 жыл бұрын

Believe it or not, this is actually upside down 😂 I also prefer it this way, just seems more natural for me. The correct way up was ok, now and then my knuckles felt a little too close but it was generally ok.

@matthewskelton5855

3 жыл бұрын

@@PhillipSkraba appreciate the reply bud. I will have to order this and see which is better for me. I would prefer it being the normal way but I can live with it being upside down. Do you still like the handle now and do you still use it? I have a few accessories that I thought would be brilliant but not really used them.

@PhillipSkraba

3 жыл бұрын

@@matthewskelton5855 I have a ton of accessories, and I mean a ton. This however is one of the few things I actually use. It is no doubt one of the best accessories I have, and now I see they have released a v2.

@matthewskelton5855

3 жыл бұрын

@@PhillipSkraba really can't wait to use it once it arrives. V2......I've ordered one but not sure if its V1 or V2.....didnt even know there was an upgrade......have you found any info on what was changed? Edit** Seems V2 has a quick release compared to the twisty screw one on V1

@PhillipSkraba

3 жыл бұрын

@@matthewskelton5855 Yes, the v2 has a fancy nato rail, not sure how I feel about that holding so much weight, but I'm sure they wouldn't have released it if they hadn't tested that out with enough force. Either way, fantastic add-on.

What mode is the gimbal in for you to go to underslung mode with holding the trigger???

@PhillipSkraba

4 жыл бұрын

I have it in the horizon mode, so it just holds the horizon no matter what I do, you can program it in so you don't have to hold the button, as that's just a pain in the ass, and it's really helpful doing jib like shots.

Nicely done 👍

@PhillipSkraba

4 жыл бұрын

Thank You 🔥

I was pretty sold after that product demonstration at the beginning Lol. I'm going to get one of these now haha

@PhillipSkraba

3 жыл бұрын

haha, oh god, that was fun! This is an amazing handle!

@justustampoc

3 жыл бұрын

Bro, I was shooketh 😂

Would this work on the Ronin SC2? I'm looking for a compact way of mounting a monitor in the centre rather than off to the side.

@PhillipSkraba

3 жыл бұрын

I think there might be mounts for the SC2 from SmallRig. Not 100% sure, but I've got a few coming from SmallRig for my RS 2, so worth checking that out.

@VisiPianoOfficial

3 жыл бұрын

@@PhillipSkraba thanks as always with your speedy responses Phillip! Will keep an eye out for that video :)

@PhillipSkraba

3 жыл бұрын

No problem. So looking at the accessories, they are all for the RS 2 and RSC 2, so they will work on both gimbals.

Ok this is dope. Can you install UPSIDE down? So the handle would be pointing up towards you? That seems like you may be able to hold in flashlight mode with better leverage, incase it doesn't get in way of the motors

@PhillipSkraba

4 жыл бұрын

It's an awesome, awesome, awesome gadget! Yes, you can, and I've done that by mistake a few times, BUT I haven't checked if it gets in the way of the motors, I realised my mistake and turned it the right way up. I'll check that out when I get back in to the studio. This way up though works really well for flashlight mode, the two points of contact are a huge help! Thanks for dropping by 🔥

Hey, I tried going through the link and it gives me an error page on their website. Is it sold out already?

@PhillipSkraba

4 жыл бұрын

Yes, apparently they are out of stock at the moment and should be back in stock next month from what I hear.

@sobeek

4 жыл бұрын

There is a new version: www.pgytech.com/products/ronin-s-sc-handgrip-mount-plus

Bought the new version and instead of the tightening dial in the middle; it’s now on the right side, which makes it next to impossible to turn it the way you have it. Super frustrated.

@PhillipSkraba

3 жыл бұрын

No way, I didn't realise that. I still have this version and use it till this day. I also love the grip this way around 😂

Mad intro i have subscribed boss hoping to see more creative stuff

@PhillipSkraba

4 жыл бұрын

Thank You! Lots more coming, I will continue to mix it up between reviews and tutorials.

What about the focuswheel and/or command unit? Can it be mounted with the pgytech handle?

@PhillipSkraba

4 жыл бұрын

Well, you can't mount it on it, but it can be mounted on the left hand side where it normally is, the handle doesn't get in the way of that.

I noticed the screws that came with the handle did not fit with the Ronin S (2:27). What size screws did you use to mount it?

@PhillipSkraba

4 жыл бұрын

Really?? In that case I either used screws that came in the box with the Ronin S or screws from SmallRig. I'm pretty sure I used the screws that came in the box though, I'll double check that tomorrow in the studio.

@droneinnovation3742

4 жыл бұрын

The screws that came in the box were 3mm the ronin comes with 4mm but we’re to short for the attachment. I just picked up a few 4mm x 12mm screw .

😁 can you use this mount with the focus wheel attachment and command unit ?

@PhillipSkraba

4 жыл бұрын

That would be a lot of stuff on the Ronin! I'd probably just go with the focus wheel and leave the command unit at home, buy I'm sure with a few attachments you'd be able to fit all that on there!

Merci pour l’astuce

@PhillipSkraba

3 жыл бұрын

You're welcome!

Does anyone know where to get extra screws from? It's kinda of odd but my accessory only came with one screw!

@PhillipSkraba

3 жыл бұрын

Really? Drop them an email, they're pretty cool and will no doubt help out.

@cheesedust-n3w

3 жыл бұрын

@@PhillipSkraba Thank you :)

Hey bro, I click on the link you provided and it's brought up the PGYTECH Handgrip Mount Plus for Ronin S model! Different - cannot mount the grip reversed!

@PhillipSkraba

3 жыл бұрын

Really? It might be the v2 model they came out with Kevin.

@DungarooTV

3 жыл бұрын

@@PhillipSkraba I suppose in some ways - the stick is now point up so easier to hold than in your example - both good I suppose.

@DungarooTV

Жыл бұрын

@@PhillipSkraba hey Brat and friends, after a year I took my gimbals including the Ronin S out recently and discovered that the Version 2 of this grip mount has a different tightening mechanism but it can be pulled out so that it does catch the control stick area so it can indeed be mounted as shown - just needs to be pulled further out enough to allow for the spin-tightening lock mechanism to clear enough space!

Can you get a SMALLRIG Adjustable Camera Monitor Mount on there with this?

@markfothebeast

3 жыл бұрын

I had to look at the images in the Amazon link. I now see it bolts to only one side so that should leave room for the monitor mount I mentioned.

@PhillipSkraba

3 жыл бұрын

Sure, there are 1/4 20's you can bolt the mount on, either from SmallRig, Ulanzi or Titla no doubt!

Zhiyun crane 3 killer ! more life for ronin s ! accessory dji like ! it's perfect ! i'm going to buy it !

@PhillipSkraba

4 жыл бұрын

Yes! It's a fantastic accessory for the Ronin S, I love how small it is and easy to use! You'll love it!

That accessory looks awesome for real....Just recently got my own Ronin S....have used my buddy's a couple of times, loved it. Curious, what setting did you use to keep the camera level without holding the button down?

@PhillipSkraba

4 жыл бұрын

This accessory is no doubt my favourite one for the Ronin-S. It's small and easy to install, and it almost fits in the box! I programmed my 2 mode button to keep the horizon, so I just set it to mode 2 and fire away.

Thanks, man! So funny, right before I watched this I canceled the order for the exact handle you showed in the box and ordered one of these. Okay, have to admit, your intro flinging the Ronin around freaked me out a bit. 🤣 Did you use the default settings for this or some custom "sport" settings?

@PhillipSkraba

3 жыл бұрын

haha, yes, the handle in the box is not that great, but this handle is awesome! There is a v2 out now, pretty similar apart from a quick release system. The intro is just me being silly! I just used the keep horizon setting, it just sits there and holds the horizon whatever silly dance I do 😂

Thanks for your video. How would you compare it to DigitalFoto Adjustable handle

@PhillipSkraba

3 жыл бұрын

If I had to choose a handle like the DigitalFoto handle I'd go with the SmallRig version. However, if I had to choose between all of them I'd go with the Pgytech, it's just so small and handy. There is a v2 now.

What's the name of the camera on the Inverted Handle Sling Grip?

@PhillipSkraba

3 жыл бұрын

That’s the Sony A7RIII.

Cool Video! Very Interesting!

@PhillipSkraba

4 жыл бұрын

It's a fantastic accessory, one that I use the most!

I'm a simple man...I hit like for the crazy gimbal dancing

@PhillipSkraba

2 жыл бұрын

haha, now that I love!

Nice Video! Just subscribed. What about the weight distribution between the left and right arm? Is it 50 50?

@PhillipSkraba

3 жыл бұрын

Thank You! Kind of, I usually use only one arm at a time, unless I'm dancing.

Can you add a monitor handle along with the grip?

@PhillipSkraba

3 жыл бұрын

I sometimes have a monitor handle attached, sure.

Thank you , it´s so needed, directly buyed ! ✌️

@PhillipSkraba

4 жыл бұрын

You will love this! I tried the SmallRig handle too, this one is hands down the best one on the market, the design is spot on! 🔥

@TravelYourselfDE

4 жыл бұрын

@@PhillipSkraba very good tipps on your channel , which town you´re livin?

just bought this and can confirm it is the best ronin attachment ever

@PhillipSkraba

3 жыл бұрын

It is excellent! No doubt the best accessory I've ever used for the Ronin S!

How to do vertical video on the ronin s?please!

@PhillipSkraba

2 жыл бұрын

I believe there is a vertical plate you can purchase separately.

So can you no longer use the accessory mounts on the sides?

@PhillipSkraba

2 жыл бұрын

Not on the side this is attached on, no.

I have never decided to buy something this fast.

@PhillipSkraba

3 жыл бұрын

I was very pleasantly surprised when I finally got this, it's really excellent!

Nice video mate will that add-on handle also fit on the SC model?

@PhillipSkraba

3 жыл бұрын

I believe it's made for both models, yes.

@SimRacingwithAussieStig

3 жыл бұрын

@@PhillipSkraba ta mate that is good to know. Do you have a link to it? Cheers.

@PhillipSkraba

3 жыл бұрын

Sure, it should be linked in the description of this video.

The hand grip link shows it’s not on their website anymore :(

@PhillipSkraba

4 жыл бұрын

I'm sure a search on their website or Amazon will show up, maybe due to the world situation they are currently experiencing production problems, no idea.

@jefft9506

4 жыл бұрын

Thanks man I just found it on amazon back in stock July 11th 👍🏻 PGYTECH handgrip Mount for Ronin S/SC www.amazon.com/dp/B082XZB9P4/ref=cm_sw_r_cp_api_i_MXm.Eb1160680

Can you rig it so it acts like a dual handle?

@PhillipSkraba

3 жыл бұрын

I don’t think so, but SmallRig sell a dual handle for it.

@JuliusSDeLaCruz

3 жыл бұрын

@@PhillipSkraba okay I'll check that one out. Thank you for the review

@PhillipSkraba

3 жыл бұрын

Anytime!

You got my attention in the first minute already because you showed us the point of the product in the beginning. Others need 10 minutes to explain how to screw it on and I quickly lose interest. Good job!

@PhillipSkraba

3 жыл бұрын

haha, this was a silly one, I remember that day 😂 Yes, it's a superb accessory, one I use till this very day! Thanks!

Hey great review! i wanna buy one now! Thanks. oh and btw the link doesn't work.

@PhillipSkraba

3 жыл бұрын

Thank You! Thanks for the heads up, I’ll get it fixed, v2 is out, maybe that’s the reason.

Great accessory to have 👌

@PhillipSkraba

4 жыл бұрын

It's awesome! This is actually something I use! A lot of accessories gather dust on my shelves, but this thing I've been using non-stop, I highly recommend it!

Thanks! You just made me buy the ronin sc with this video :)

@PhillipSkraba

4 жыл бұрын

haha! It's such a good gimbal! I'm sure you'll love it, get this handle too and you're golden!

@vanraz

4 жыл бұрын

Phillip Skraba as soon as this quarantine is over here in Italy I will get the handle too :) thanks man! Subscribed.

@PhillipSkraba

4 жыл бұрын

@@vanraz Ahh, I hope you guys are okay over there! Here in Poland it seems to have been quite mild. Thank You! I really appreciate the sub 🔥

I think there are two versions of this. One with the screw attachment thing and one with a lever. The major difference between the two is that the one you have you can flip it around upside down and the one I got you can't really.

@PhillipSkraba

3 жыл бұрын

Yes, this was the original, and I think you got the 2nd version, slightly different.

@AbuseeeM

2 жыл бұрын

Hi Thomas, yes you can flip it. Its a bit tricky but so simple when you get it. I'll try my best to explain it. You know the big screw (Grey) the one that looks like Ronin S Grey screws and you use to tightening the locks. You can actually pull it out and it will change directions. So flip it and then pull out the screw, change direction and tighten clockwise. Then again pull the screw out and tighten again .. until its perfectly locked. It takes 10 seconds. I hope I was able to explain it clearly. Cheers

@thomaswindfeld728

2 жыл бұрын

@@AbuseeeM Thanx! :-)

are you using a green screen ? the background looks great ! plz do reply.. will b waiting

@PhillipSkraba

4 жыл бұрын

No, just a plain wall, no green screen. One light setup. Thank you!

Mine, despite cranking it down, is sloppy at the connection point. Anyone else?

@PhillipSkraba

4 жыл бұрын

The PGYtech handle? It's loose?

@MrGaza993

4 жыл бұрын

just got mine today and its rocks on the thumb screw joint

Ok, I'll subscribe, but after that intro, I want to meet your dealer.. lol

@PhillipSkraba

4 жыл бұрын

haha, okay, I went overboard 😂 I was just trying to demonstrate how crazy you can go with this thing 😂

What kind of sickness do you have?

@PhillipSkraba

3 жыл бұрын

It's called GAS, aka Gear Acquisition Syndrome, you too? 😂

Was I the only person stroking out when he started jerking the rig in the beginning? Great video and informative. Cheers.

@PhillipSkraba

Жыл бұрын

lol! Thanks, happy you liked it!

1:10 funny bro lol

@PhillipSkraba

3 жыл бұрын

I do my best to keep the community entertained 😂

I'm thinking... this would be a great mount for a field monitor !

@PhillipSkraba

3 жыл бұрын

It could be, yes! However, SmallRig make quite a few cool mounts for monitors for the Ronin series.

@andrewelliott8747

3 жыл бұрын

@@PhillipSkraba I would love to use this handle but also retain my centrally mounted Shinobi monitor. The issue I have it the battery, which is centrally located gets in the way of the joystick, I would love to mount my monitor to this handle, if I use the handle in the upright position, would I be able to also use the underneath of the 1/4 thread to mount a monitor swivel?

@PhillipSkraba

3 жыл бұрын

@@andrewelliott8747 I'm afraid you'd have to mount the monitor on one of the 1/4 20 holes on either side of the handle.

Ok....1:04....I'm sold!

@PhillipSkraba

2 жыл бұрын

haha, I've sold tonnes of these! It's such a great addition to an already awesome gimbal, have fun!

is this the best handle for Ronin S?

@PhillipSkraba

4 жыл бұрын

Yes, I've tried them all and this is with no doubt my favourite! The Smallrig is pretty cool, but a little larger and just a whole lot more to carry.

@davidvalens3337

4 жыл бұрын

@@PhillipSkraba what about this?

@davidvalens3337

4 жыл бұрын

www.amazon.com/dp/B085WPY693/ref=cm_sw_r_cp_apa_i_u5neFbJCE2NX6

Combine that with cinelocks so you dont need to wear the screw thread of the stand out.

@PhillipSkraba

3 жыл бұрын

Sure, you can do, mind you I've been using it since I bought it quite a lot and the thread looks like it's new, so not something I think you have to worry about.

Actual link Plz u cant click on the one u put up

@PhillipSkraba

4 жыл бұрын

Fixed, thanks for the heads up!

Could you mount it side ward? (Thanks)

@PhillipSkraba

4 жыл бұрын

No, I'm afraid you can't. Only straight with the gimbal.

@ReleaseYourHandbrake

4 жыл бұрын

@@PhillipSkraba Thank you!

@PhillipSkraba

4 жыл бұрын

@@ReleaseYourHandbrake No problem, anytime!

The link doesn't exist?

@PhillipSkraba

4 жыл бұрын

Yes, it's currently out of stock due to the world situation, it should be back in August I hear.

❤️

@PhillipSkraba

3 жыл бұрын

Thank You!

@TFaminu

3 жыл бұрын

@@PhillipSkraba #Family my G! The timing was perfect

Man, before you do a tutorial, be sure that you mount your handle correctly. Check the box at 2:33, you mount it the wrong way... the handle is suppose to go over the camera. That's the way to install it for low shots like the Weebill Lab or Weebill S.

@PhillipSkraba

4 жыл бұрын

I actually stated that I mount it specially the wrong way at 6:30. I find it much easier to use when facing down, I find it sturdier, I find it easier to hold in underslung mode and with heavy lenses with the main motor pushed all the way back it doesn't smash into my knuckles. So for low shots and high to low shots I find this to be the ideal way to hold it, it makes the transition a ton smoother in my opinion. That's just my opinion though, of course you might find it easier to use the way it shows on the box.

красавчик

@PhillipSkraba

4 жыл бұрын

Спасибо!

Sorry to break it on you, but Nivea is not something that I'd call "proper" hand cream… Take care of your skin with good quality stuff. But to be more to the point, I was surprised you didn't show it in the other angle setup (the one on the box where the handle is parallel to the lowest beam on the Ronin - pretty much the same as that other handle does). Cheers

@PhillipSkraba

3 жыл бұрын

I'm so lazy when it comes to hand cream, once a week, and then I moan about my hands hurting 😂 I've got to be honest, I preferred it the wrong way around, found it much easier to use. Go against the flow 🔥

@Scab5679

3 жыл бұрын

@@PhillipSkraba yeah I can see how that “inverted” way would be nice to do but guess what… the new version cannot be put on reversed… :/

If you check all the videos about this handle on youtube, your the only one that mount it the wrong way...Lol

@PhillipSkraba

4 жыл бұрын

I know 😂 PGYTECH must be so pissed off that the film with most views on this handle has it upside down the whole time 😂😂 It works much better this way though, let's hope they change the picture on the box!

@julianizdebski5035

Жыл бұрын

@@PhillipSkraba I actually bought it specifically because it was facing that way

Does is work with moza air 2 ?

@PhillipSkraba

4 жыл бұрын

I'm afraid I'm not sure about that as it's made for the Ronin-S. Smallrig make an underslung handle for the Moza Air 2, it's much bigger than this though.

@req170

3 жыл бұрын

@@PhillipSkraba dors it work on sc ?

@PhillipSkraba

3 жыл бұрын

@@req170 I believe so, yes.

Hey bro, I miss your older videos - you used to be so funny! LOL - by the way, most people mount this the other way up - I prefer to have it down like this too!

@PhillipSkraba

Ай бұрын

Ahh Kevin! You're alive! Hell, I'm still funny! I haven't used this in years, they just keep sending me new gimbals!!

@DungarooTV

Ай бұрын

@@PhillipSkraba Ha ha ha...don't forget brat I have been with you from the beginning...

@PhillipSkraba

Ай бұрын

@DungarooTV you sound like my Mum Kevin!

@DungarooTV

Ай бұрын

@@PhillipSkraba Ha ha have you been brat?

@PhillipSkraba

Ай бұрын

@@DungarooTV Oh you know, just chillin', having a Bud. Been trying to keep away from drones, but now that America might be banning them, I might make a come back haha!

Far you are a crack up.

@PhillipSkraba

4 жыл бұрын

I try my best 😂

There goes your focus wheel.

@PhillipSkraba

3 жыл бұрын

Wait, where?

Or u know - could just buy the weebill lab/s series and save all this hassle

@PhillipSkraba

4 жыл бұрын

Sure you could, but I'm guessing like many people I have a lot of trust in DJI, it has never failed on me, it can handle a ton of abuse and it has a load of features the Weebill doesn't, that's why I stick to it. I don't really find this to be a hassle either, I actually like the fact I can have a single handle or double. The Weebill S is a great little gimbal, but personally I prefer the Ronin S. Thanks for dropping by 🔥

@gbsaint89

4 жыл бұрын

no problem.i also agree.dji software is so much better and tracking is also better. pros and cons i guess. nice channel btw.subcribed

hahaha, farmer Dave made it to the video :D

@PhillipSkraba

4 жыл бұрын

The best farmer in the world 🤜🏻🍒🤛🏻

Nevermind, I see it's connected on one side.

@PhillipSkraba

3 жыл бұрын

Oh okay, haha, spoke too fast, been there done that! Happy New Year!

@audiophocus65

3 жыл бұрын

@@PhillipSkraba Absolutely. You also.

still washing 40-50 times a day lol?

@PhillipSkraba

3 жыл бұрын

I think I've dropped to like 30-40 😂

@cltweddings

3 жыл бұрын

Phillip Skraba hahah I hear ya man good video

can i make videos? i dont have an accent

@PhillipSkraba

4 жыл бұрын

I'm afraid only strong accents are allowed on KZread, it's in the regulations, otherwise you are not allowed to make videos. Try a Scottish one, that's always a good one.

Be careful, or a fly will fall into your mouth.

@PhillipSkraba

4 ай бұрын

Thank God you said a fly.

when I see 01.00 he do it with gimbal things .....im outa here ....and thumbs down!

@PhillipSkraba

4 жыл бұрын

Thanks for dropping by 🔥 Any thumb is a good thumb, so thanks either way! If you really don't like it, hit that thumb twice just to make sure 😂