Lots of "DGI"s in this video. Sorry guys, pretty sure my mouth can't say DJI unless I'm really thinking about it😑

@dylanharvy

3 ай бұрын

😂😂

@AndreSjoberg

3 ай бұрын

See my separate comment further down for details: you *can’t* record internally/backup recording when connected via bluetooth to a smartphone. Not possible. You *can* trigger a recording if transmitter is in bluetooth mode *and* not connected to a smartphone (blue blinking light) - but if connected to a smartphone via bluetooth the recording button does nothing but angrily buzz and red light goes on and off again.

@seanfichera

3 ай бұрын

🤣 Oh well.

@LJ_alltheway

3 ай бұрын

It's the same for me!😂

@valuemastery

3 ай бұрын

@@AndreSjoberg Just tried it, and despite what you say, I can. Works just fine.

Hi David, nicely done 🙂 1) If you have manually paired one Microphone / Transmitter to another device by Bluetooth, e.g. your mobile phone, it will NOT automatically re-pair to the DJI receiver when you put everything back into the DJI case. You have to put the Mic / Transmitter into its WiFi, not Bluetooth pairing mode before the resync will work. 2) I would also set 32 bit record up as that gives you something to rescue with more latitude in post from the Microphone / Transmitter recording. Note: the 32 bit recording is on the Mic / Transmitter only, it is not in 32 bit format when being transmitted to the DJI receiver. 3) You can switch off the function of the PWR button on the Mic / Transmitter which allows you to switch-on or off the noise reduction, so that it doesn't accidentally allow it to be switched. 4) If you've set auto record to ON and locked the record button, you can stop / start the recording from the receiver.

maaan, that cable pulling scenes killed me.

Very crisp sound from that DJI lav. 👌

Integrity brotha. That's why I love your channel. Thanks for keeping it real/honest.

I really loooove this video...not many of us can accept when we make a bobo, more over do a whole video with the changes and new perspective...thats why I love seen this guy. Honest, great, funny, what else you want XD

I appreciate you so much. You’re giving us all the info! Answering questions and correcting yourself when you make a mistake. I really like these wireless mics. Trying to decide if I need them (I want them for sure) and whether to get the DJI or the Rode…. 🤔

It is fine to make mistakes or be wrong, it happens. No one is perfect. Worse is never admitting and insisting on being wrong. Keep up!

@geekindakitchen

2 ай бұрын

All about the "be a good human" movement lol

Love the follow up! Great job!

Fredo Heavy has a great dji mic post production video

thx, cool vid! like the beach part with the yellow text and lut fits well together

OMG I'm so glad I watched this, I just bought the DJI mic 2 and was SO confused why they sounded so thin out of the box, was considering returning them because of it, the first tip about the low cut filter genuinely saved the product for me, thank you!

Thanks for adding these points. I just watched the other video before and was surprised that the Mic 2 just seemed to sound more flat and worse. This clears that pont up. Also, great that you go and say "hey yeah I was wrong there", not many people can do that. That's big points in my book. 👍 Again, thanks!

Great Video!! DJI 2 for the win!!

Thanks for bringing this to our attention. BTW you were not the only one not checking the low pass filter setting. There are many reviews out there were the DJI MIC 2 sounds a lot "weaker" then the Rode Pro. I just realized how much beter the sound from your main mic is compared to the DJU Mic. Whats your Mic/Sound setup?

Great job on the video David! Thanks for making it.

Great update, there needs to be a disclaimer: “warning, this video includes lav cable abuse viewer discretion advised” Great video bro! Thank you! 💪🏼

Awesome video! And your responsible attitude admitting that you're wrong and correcting them is very admirable!

Nice! Kudos for the update!

I don't know about 1 being pared at a time. But if you keep them in Bluetooth for the pocket 3 then put them in the case, they 100% stayed paired to your pocket 3 when you take them out. They do not default back to the receiver

Thanks for your honesty. We all make mistakes.

Dave, I FEEL your pain. I know the exact scenario- research, perfectionism, and being murdered in the comments for getting some fact or detail WRONG. Here’s a lil powder to get a cheer-me-up. And thanks always for the EXCELLENT work you do! P

After watching your last video I almost didn’t buy the DJI mic 2 but I thought something wasn’t right so I decided to see for myself glad I did. Figured out the low cut in a couple minutes and realized the mistake in your last video. Thanks for the update. This is a great mic.

What an intro on this DGI video 🎉 🙌

@DavidManningvlog

3 ай бұрын

Dude, SO many DGI's when I started editing this🤣

That routing path is more important for the longevity of the 90 degree connector than the "yank out" resistance. Trust me, back from the days of using wireless packs on my guitar...those 90 degree connections SUCK if they're not stabilized well. Flexing them back and forth nearly always ends up wearing it out, and boy howdy are those teeny tiny connectors difficult to rewire and repair. The routing detail behind the clip is a nice design feature to mitigate that for sure.

@DavidManningvlog

3 ай бұрын

A super solid design element! Dual use, protect the cable and prevent pull outs👍

Holy crap, the DJI sounds way better now. I was a little put off by the DJI after that video until I saw this. Stoked, cause I still haven't pulled the trigger yet.

@DavidManningvlog

3 ай бұрын

Sorry about that! Hahhaa! Man, when I realized it I was shocked that it was on by default

Thanks for the update. I'm curious as I had linked one of my Transmitters to my camera and I charge it in the case and it does not automatically re-link to the Receiver. Perhaps I don't leave it in the case long enough when I open it?

Great information, thanks for sharing.

Thanks for this. Your original video was one of many that caused me to cancel my order because I could not stand the audio out of the DM2. I agree that this is kind of (mostly) DJI's fault. This high-pass filter should NOT have been on by default. I know the DM1 had that, and I turned it off. Rode did not have this filter that I noticed. I don't recall the filter having such a huge effect on the DM1 audio, but my memory could betray me. So now, I have one issue with the DM2. The big-ass logo and reflective case that is also transparent showing the texture + detail of the electronics. The Rode suffered from this nonsense too, but I found some matte stickers on Etsy to cover it up. A lav mic should not be a distraction, and draw no much attention to itself than what is absolutely necessary.

Awesome video again David I am just wondering does the dji mic 2 work with the gopro hero 12 using Bluetooth

Oh no...covered a lot of great stuff on here but might need 1 more video. Forgot to mention the new firmware release (for TX / RX) that came out on 01-31-2021 (v04.03.08.31). Just giving you a hard time...keep up the great work! 🤣🤣🤣

Hello, I have a question. What will the DM2's noise-canceling audio look like now that low cut is off? Thank you and continue a good job.

Dude, thanks for the update. Did you do a side by side comparison of the lavs in this video?

Biggest question for me was, why was the low cut on as default? just discovered that myself over the weekend. Also noticeably lower gain levels than my other mics. DJI law mic still out of stock in the UK, looking forward to picking one of those up.... thanks David! appreciate the video.

great response to error. learned some new stuff

Turning the low pass on by default when a large percentage of your customers arent professional audio folks seems a bit daft.

@todddammit4628

3 ай бұрын

Professional audio folk here, I would NEVER turn a lpf on at the source. The only circumstance for that might be if it was a live broadcast and there was no other way to cut the lows (ie mixer) and I was worried about something like excessive wind or background noise. You don't get the lows back if you change your mind later.

@valuemastery

3 ай бұрын

@@todddammit4628 Professional audio folk here too ;-) there is actually one use case for the LCF (it's not a LPF) at the source, namely when the rumbling noises are so severe that they would clip your recording. But otherwise, I think you're completely right. (of course in that case it would be best to identify and remove the cause for the rumbling, but if not possible -> LCF)

Awesome as always David! I'm still rockin my OG Wireless Go but this stuff just gets better and better, there's just no excuse nowadays to have shitty audio as there's so much options.

Benefit of DJI clip retainer for the wire is that it will “lock” ANY lav mic. The Rode unit will only lock lav mics that have the lock. I suppose you could still wrap the wire around it’s clip if it fits without pinching the wire. Thanks for the helpful reviews!

It shows you care more about your viewers than bring right. Appreciate that David, thanks.

I have a Sennheiser MKE2 lav mic and I routed mine under that little clip on the transmitter and it worked for 15 minutes then no more. I checked it with my other equipment and I didn't short the mic - but will not work on the transmitter anymore. Maybe think twice about routing yer lav under it. Just sharing my experience. Great video. Merci.

I have the dji mic 2 and have watched many videos already but I found this video very helpful. I thought the dji sounded more pleasing. I listened on Edifier speakers.

Everyone else does not seem to have noticed the low filter (high pass filter) either. You make me realise that the DJI Mic is okay.

Good updated information 👍 On the very last note. I run one transmitter BT to my Action4 & it has never reconnected to the receiver in the case while charging. Pre or post firmware, maybe it’s a setting?

@valuemastery

3 ай бұрын

You need to set it back from Bluetooth mode to Receiver mode. While turned on, press and hold the record button in the mic. The connection LED will switch from blue (=Bluetooth mode) to green (=receiver mode), and connection with the receiver will function again.

@Atopper

3 ай бұрын

@@valuemastery Thank you for the tip. Im happy it actually stays disconnected from the receiver for my use.👍

So, mistake #3 now, did you check hi cut (if there is one)? 😊 Rode sounds much more open with more hi frequencies, again not so close sounding mics.

Thanks for the review and updates to your previous review. No shame in being wrong when you're cool enough to set the record straight. I do wish a screw-on lav feature was an option for use with professional lav mics. The built-in noise reduction constantly varies the sound quality which is destructive. Always best to apply noise reduction in post. Always. It's great that filmmakers have so many compact and affordable options for audio. These may lack some of the features and performance of professional systems, but they are waaaay better than using on-camera microphones. Audio, is so, so, so very important. I'm glad that DJI is giving Rode some competition, which encourages improvements that users benefit from. Life is good.

Nice follow up.. I've been a Rode guy but I think I'm going to replace my current Go IIs with the new DJI setup..

@VandromedasTravels

3 ай бұрын

IMHO you'll gain nothing by doing so, unless you find the new TX units sexy.

After going through 2 separate sets of DJI Mic 2's I had to return them. I was getting strange intermittent static & noise aberrations while using the DJI Lav Mic. Not sure what that's about, but I didn't trust it for my work related content. Sticking with the DJI Mic 1... I'm considering trying the Rode Wireless Pro, but don't like the whole cable thing for Smart Phones. Prefer the clean attachments from DJI... However, I think I have a work around for an adapter from another Mic set that would make the Rode Pro connect with a USB-C to USB-C attachment. Could you do a quick video with the low cut settings for the Rode. Curious sot see how that sounds on and off... with and without lav.

Thanks for the Video!! We too would not have know about the looping the wire to secure it so big thanks for sharing that (seems obvious now we know lol)

Really thinking about buying this now. Especially with the Sony Hotshoe adapter.

This is unrelated but are you using the A7 IV for your studio headshots or the A7C ii?

So, I got these mics and I paired my second mic to my DJI action 4 when I take it out of the case it stays connected to my action 4 it doesn't pair back to the receiver when I put it back into my case . I'm not sure if my set is not working right but, I actually like having it this way . I have one dedicated to work with the receiver and one dedicated to my action 4 without the need to keep pairing it back to my action 4.

I'm a big fan of your content and I'm reaching out for some advice. I'm in need of a wireless solution to monitor audio, especially when I'm away from the camera or receiver. Could you recommend any reliable systems that offer wireless monitoring compatibility with headphones? I'm open to any wireless headphone options. Thanks in advance for your help!

So here's a question...... I use my DSLR sometimes, then my phone and then my GoPro and the audio can be drastically different between the three. So which mic's would be better for internal recording? My phone makes a horrible hiss sound so I have to edit the audio. My GoPro generally always sounds as good as my DSLR but with my current mic, the audio can start to fade and sound like in a well then immediately goes back to normal. My devices or my cheaper mics? I use Synco currently but really would like a good set that will record internally. Suggestions/recommendations?

David, thank you for your wonderful insights, very useful. Can you use the DJI Mic 2 via bluetooth directly with Insta360 One RS module, without the receiver? If so, does the internal recording work simultaneously?

@DavidManningvlog

3 ай бұрын

I haven't tested it with the ONE RS yet, but it for sure works directly with the Ace Pro. I'll try with the ONER RS and get back to you

@tordendar5770

Ай бұрын

I found this in a footnote on DJI's website: When the DJI Mic 2 transmitter is connected to a smartphone via Bluetooth, internal recording is not available. HTH

Can you please compare the lav mics using both of these? I’d love to see which system sounds better using the lav mic. Thanks!

@valuemastery

3 ай бұрын

It will have to do more with the mics used than with the transmitter. I have a Sennheiser AVX lav mic which costs about 1200 Euro, and it connects fine with the DJI Mic 2 transmitter.

I like the action 4 with the mic2 setup for my moto vlog setup 👍 - i smashed the like button. Thanks for sharing the vid David 😃

@DavidManningvlog

Ай бұрын

Appreciate it brother!

Good video. My question is can you use both Mic 2 microphones via Bluetooth on the DJI Action 4 or does the 4’s Bluetooth only allow one mic at a time?

@valuemastery

3 ай бұрын

I can't tell for the Action 4, but I just checked with the Pocket 3, and there it is possible to use two of them via Bluetooth.

I am really glad that the DJI MIC2 came together with the Creative Combo. I will not get the receiver, since I am always going to have it paired with my OSMO Pocket 3. But I bought an extra MIC2 ... the white one ... and have it paired to my iPhone (as standard). And I still love my Røde Wireless Pro kit, and will still use those as main audio kit together with my Mirrorless cameras. :)

@oldachyrunner

3 ай бұрын

I'm also thinking about getting 2 DJI Mic2s, but was wondering if you can access all the settings (like disabling the low cut filter) without the receiver. Can you confirm if all the settings are available without the receiver? Thanks!

Okay this is probably a dumb question 😅 do I turn the low pass filter on or off on the Rode Wireless Pro?

Can you adjust settings like “low cut filter” if you only buy 1 transmitter only?

Excellent follow up video! Turning off that low cut filter made a big difference! Did you get a chance to see if the DJI 2 fits invisible on the insta360 x3 with the mount you mentioned?

One issue with having the transmitter record locked on is that you can’t switch the transmitter into Bluetooth mode without going into settings on receiver and turning it off. (So if you want to hot swap from receiver to pocket 3 etc. you can’t do it easily) Also if your using Bluetooth on your iPhone / insata360 camera etc you can not record internally. For noise reduction I wish they would allow us to disable it completely. I have accidentally hit it a few times now. Otherwise, it is a great system, I think it’s more geared toward content creators than it is professionals, but for me, having ability to connect it to Bluetooth devices is what allows it to stay in my bag. I also have the rode wireless pro system but I don’t carry it unless it’s for specific reason..

It sounds a lot better after the latest firmware update also, I was using just the transmitter and it sounded like noise reduction was on all the time and it's much better now, My guess is with the transmitter only it defaulted to the low cut but didn't show it in the camera menu.

Hey, wondering if either of these work well or at all with the Pixel 8 Pro?

Thanks for the update. Any hacks for the terrible design choice of shiny front plastic and bright logo? Kind of the opposite way Rode went? I am looking at these seriously but the clear plastic gives me concerns since clear plastic is usually weaker than coloured.

@ChrisNewham

3 ай бұрын

Got to seriously wonder what your doing if more strength is required than the clear plastic gives. I have been climbing and banging one of my units into rock and had no problem other than a couple of cosmetic scratches.

@yeeisme

3 ай бұрын

@@ChrisNewham the strength is a side effect however my biggest concern is how not-subtle the updated branding is. Bright logo on shiny front plastic is not exactly discreet.

@ChrisNewham

3 ай бұрын

@@yeeisme I don't like the prominent branding either I got a tiny paint brush and painted the DJI logo black so its no longer really visible but for my use case I mainly use the lav anyway so the bright branding isn't an issue.

Thanks for the update, the Low Pass filter should be turned off. The mystery mic #2 sounded better. I was hoping that was the DJI.

Mate, Those mics were not supposed to be tested by being carried near to the mouth. By doing that, you are making it easy for DJI. All the tests should show how strong a wireless mic can pick voice when it’s hanged on a shirt or using a Lavalier Mic attached.

The Rode is significantly brighter in the top end and so seems more ‘present’ than the DJI. I’m not keen on the shiny plastic finish of the Rode though tbh. Swings and roundabouts …..

@DavidManningvlog

3 ай бұрын

I think that's totally right, the Rode's built in mic has a brighter presence in the top end. But this is also both straight out of the transmitters without any editing. Pulled into edit, you can pretty much make either of them sound how you want

@valuemastery

3 ай бұрын

@@DavidManningvlog Thanks David, that's a great insight.

8:56 Noise Reduction via bluetooth only works if the paired device has Wind Reduction internally such as thr DJI Pocket 3/Insta360 X3, DJI Action 4. I've paired my Mic 2 to my Samsung Galaxy S23 Ultra via Bluetooth and the noise/wind reduction does not work as the camera/voice recorder apps don't have that feature. So if a person is a smartphone content creator...they will need to pick up the kit that has the Rx in order to have Noise Reduction

Flawless ❤

Already bought the Rode Pro, just think it sounds better overall. Just wish it had the features of the DJI mic. Bottom line is sound for me though.

I’m sorry: You *can not* record internally in the transmitter when connected via Bluetooth to a Smartphone. Not possible. I made a video about it couple of weeks ago - Dji has the info on their website, but pretty well «hidden» out of the way. So no, you *can’t* record internally if using bluetooth to connect to a smartphone, so *only* way of getting better audio if one only has the transmitter and a smartphone is to record video using internal phone mic, and use the Dji Mic 2 transmitter as a disconnected recording device, *then* it will record internally, but not in bluetooth mode.

@JoeGold100

3 ай бұрын

Yes this is true. You can not record on internally when connected via bluetooth.

funny thing .. I ordered the DJI Mic 2 before seeing your video .. then saw your video and thought the Rode Wireless PRO sounded better so I ordered those also LOL now I have BOTH of them and here I am seeing this video about the low cut setting .. I still love ya though because it's on me that I've made more silly decisions but I will have to force myself to use each mic every other time I film just to not feel like I wasted because I'll have FOMO if I return either :O

@charlizezelenova5279

Ай бұрын

which one do you prefer since you have both ? im considering which mic is best ....

I don’t see why you can’t pair with the receiver and the Osmo pocket. I believe you can have one Bluetooth pairing and to the receiver and change between these modes on the transmitters. It works with my phone but haven’t tested with the Osmo.

Do you have to use the transmitter to access the low pass filter? Can you access the setting on the Pocket 3 or app? Thank you.

@valuemastery

3 ай бұрын

The low pass filter setting can be accessed through the menu of the Pocket 3.

@jamesgarcia1680

3 ай бұрын

Thank you!

im so torn between these two, i think I prefer the audio sound of the rode wireless pros, but the transmitter interface and style on DJI system looks so much nicer. and having the option for a white transmitter for wedding dresses is also very ideal. thanks for the update!

@jessejayphotography

3 ай бұрын

Spend 30 minutes developing an EQ preset and you can get the DJI sounding great (same with the RODE). I do wish DJI sounded better out of the box.

@JamesJacksonFilmz

3 ай бұрын

Personally the Rode Wireless Pro has more longevity and better investment than the DJI Mic 2

I could still easily tell which one was which. Myster mic 2 was the Rode, which still sounds much better than the DJI, and that's with laptop speakers. But it is closer now without the low cut engaged.

@DavidManningvlog

3 ай бұрын

Yep and this is also straight out of the mics. In post, you can pretty much make either of them sound how you would like. Both super solid mics!

@scottgibson6022

3 ай бұрын

I wonder how many purchasers really want to have to mess with the eq in post. I sure wouldn't.@@DavidManningvlog

@sirgigolo

3 ай бұрын

Especially when one mic already sounds how you want it to sound. But unfortunately, I will have to get the DJI mics because I have the pocket 3 and action 4 so it makes more sense. The Rode mic just sounds better.

@robertquinonez_

3 ай бұрын

@@sirgigolo you can use the road wireless Pro with your pocket 3. Yes, you need to plug-in the receiver, but is very easy to put a cold shoe adapter on the back of it.

I love the mic 2 and am finding more things I enjoy about it. I would go crazy having to go through all the audio it would record if I had the audio lock on. Maybe that's just me and my use case. Good to know though.

Does anyone know if there is a difference in recording quality when using the Pocket 3's Bluetooth connection compared to using the receiver with the Pocket 3? Thanks!

on the mystery test the #1 is the dji, the sound is more muffled, audible even on my smartphone speakers in 360p quality on the video -and yes, the dji mic 2 is much clearer if held in front of the mouth like you do, but the problem is: these are supposed to be clipped to the chest, or clipped onto a jacket lapelle, and when worn like the the muffled-iness of the Dji Mic 2 is even more noticable compared to the Røde Wireless Pro. Although the Dji Mic 2 package «is cheaper» than the Røde package, they cost approx the same if adding lavaliers to the dji mic 2 (which might make’m more expensive than the røde package). And to get the clearest sound possible from the dji mic 2’s the cabled lav is necessary, and places it closer in sound to the Røde (but without the lav on the Røde).

Another tip: the BT audio quality is not as good as the standard mode. Record onboard the transmitter and use the BT audio in the video to sync up to the internal recording.

@AndreSjoberg

3 ай бұрын

If connected with a smartphone via bluetooth the internal recording feature is disabled on the transmitter, I made a video about it a couple of weeks back - dji «informs» you about this hidden pretty well on the website :/ So only good quality option without the receiver is *not* connecting the mic to the smartphone, use internal recording, and then sync in post :/

@valuemastery

3 ай бұрын

@@AndreSjoberg Maybe you had an older firmware version? My Mic 2 does record internally fine, even when connected to my iPhone via Bluetooth.

@AndreSjoberg

3 ай бұрын

@@valuemastery latest firmware on release, and latest firmware updated when it came some days ago - not sure how yours can record internally while connected to your smartphone since dji states it doesn’t on their website: «5. When the DJI Mic 2 transmitter is connected to a smartphone via Bluetooth, internal recording is not available.» Is you mic showing a steady blue light and you are recording in an app on the phone, while the recording light shows steady red? Because your mic can be «connected» via bluetooth and record internally, *if you are not actually recording in a camera app* on the phone - as soon as the mic is actively recording to an app on the phone it won’t record internally :)

David which one was Mystery Mic Number 2?

When you turn off the low cut filter the DJI 2 sounds better (most reviewers didn't turn it off, what I seen on KZread ), but still the competition sounds better, in my opinion Hollyland systems are currently best . The only advantage the Dji2 mic has it's part of an ecosystem so that's a big plus for some.

One thing I think is worth mentioning is that the lav mic is an extra expense with the DJI Mic 2, but you get two lav mics included with the RØDE wireless Pro...

@AndreSjoberg

3 ай бұрын

Yeah, if you look at the packages side by side, and factor in the price of 2 dji lavs, the Dji mic 2 is actually more expensive than the Røde package - dji costs less money for «a» package, but more expensive if you want lavs as well

@DavidManningvlog

3 ай бұрын

Definitely a bonus on the Rode side and on the DJI side, the bonus is being able to buy the same product in multiple arrangements all the way down to just a transmitter for $99

@AndreSjoberg

3 ай бұрын

@@DavidManningvlog Just too bad they couldn’t match the value of the Røde combo with lavs, which give you more options for less money :/ The Dji TX + RX combo is pretty good value for someone starting out just like me, not really needing the case and the extra mic, but a lav in there would have made it a perfect combo

@matthewpateofficial

3 ай бұрын

You will also need to purchase a case or mount if using rode with iPhone and that white cable if you still have a lightning port.

@AndreSjoberg

3 ай бұрын

@@DavidManningvlog that bonus diminishes though when you can’t do internal recording if buying just mic to connect to phone via bluetooth, and the mic not working with the iphone native video app via bluetooth, and not being able to disable the low cut filter with just the mic, or enable 32bit float with just the mic if using it as a standalone recorder *and* the audio via bluetooth to iphone quality is really sub-par. so the 1 tx and 1 rx combo is the only viable option for full feature set, but then one discovered the tx built in mic is noticably duller/muffled than the røde, and you need to buy a lav mic as well for the tx and then your close to the price of the 2 tx and 1 rx combo, which when buying 2 lavs in addition is more expensive then the røde set, which has slightly brighter audio on the wireless lav out of the box *and* comes with to wired lavs …

Can you use more than 2 mics with the dji pocket 3

My EQ settings make the DJI Mic 2 sound like a SHURE SM7B

Is the lav mic TRS or TRRS?

I have them both. The DJI is better plug and play the Rode is better audio quality in my opinion and functions better with higher end lav mic’s. The Dji I use exclusively with the DJI pocket 3.

I recorded a bunch of interviews at SHOT Show. I used two DJI mics, and two Rode mics. The Rodes have a TON of background noise. The DJIs pickup the person wearing it, and anybody directly left or right of them, but not.a whole lot of the background noise. As a matter of fact I had to add some extra background sound that I captured with the Rode mics by just recording in a common area for about twenty minutes.

@BassManStrikes

3 ай бұрын

Did you update the firmware on the mic 2 ? Before last update the mic 2 did a really bad job at picking up background sounds and sometimes you want those sounds 😀

Sadly, DJI does not give any way to change this (currently) without having the full set with the receiver. This is bad for folks who are just using the transmitter with a phone. Their support suggests going down to a store that sells them and use their's… but I have yet to find any store around my that sells them ;)

DJI has a real issue with time-code. My Mini 3 Pro video footage also doesn't have time-code. It's kind of a weird omission.

Do you use these with your GoPro?

@6:22 is not quite right. From a footnote on DJI's website: When the DJI Mic 2 transmitter is connected to a smartphone via Bluetooth, internal recording is not available.

I bought the DJI but i must say, painfully so. The Rode sounds better, period. Even in this second experiment. The DJI has some versatility like Bluetooth, being able to use it without the receiver and thats why i bought it. One issue that other channels are reporting is a difference in sound quality between the two transmitters. Thats a big problem.

Kudos for owning up to some mistakes. Lots of gear and lots of tests; mistake are bound to happen.

The Rode still sounds way more robust, the DJI mice sounds flat. They sound totally different even with speakers.

@Reviews4fun1

3 ай бұрын

Heard another guy post process the dji and it sounded awesome

@TacticalCactusMedia

3 ай бұрын

@@Reviews4fun1yea with basic EQ the DJI sounds incredible. You wouldn’t be able to tell at all. Sure it’s an extra step, but it takes 5s once you know how to do it

@fotosoldier

3 ай бұрын

No question the Rode mics have superior audio over the DJIs. Tested the Mic2 kit and returned it for a Rode wireless pro kit.

@djboost123

3 ай бұрын

DJI all the way for me !

@ziyansanmgr2509

2 ай бұрын

Yeah rode still sounded more brighter i think dji is using cheap quality tech inside

Does anyone know if this mic 2 can record stereo to iPhone? As the mic 1 could only record mono through a lighting connection.

Where did you get your pants? I looooove them!

@DavidManningvlog

2 ай бұрын

You're looking at the Lulu Lemon ABC joggers!

@KitchenKnifeGuy

2 ай бұрын

no way! I've rocked the pants for wedding photography. Didn't know they made joggers. Done deal :D @@DavidManningvlog

You don't have to pair them again it just goes from transmitter mode (green) to bluetooth mode (blue) if you put it back to bluetooth mode it will be paired been using this with a osmo action4 for a while like this.

Which font is this? Really like it! "Mistake #1"

@DavidManningvlog

3 ай бұрын

Gotham Black👍

@KatheYKike

3 ай бұрын

thank you! also great stuff :) be proud@@DavidManningvlog