DJI FPV Top GoPro Mount Tutorial
How to install the Aerial-Pixel Top GoPro Mount for the DJI FPV Drone.
Get the mount on our website here: bit.ly/djifpvmount
or on our Etsy Store here: www.etsy.com/listing/976556435
or on our eBay Store here: www.ebay.com/itm/324511294740
Hex driver set: amzn.to/3mAcKPS
Get the DJI FPV Drone here: amzn.to/3zpoqID
If you have footage using our mount we would love to see it, post a comment with a link to your video to be featured in the list below.
Watch other reviews of our DJI FPV Top GoPro Mount:
Niklas Christi • The Perfect Beginner F... and here • Pro Pilot vs. Beginner...
Drone Pro Academy • Why I VOIDED the Warra...
Cory Mayo • Drones Are Fun Again! ...
Mike Lotempio • DJI FPV w/ GOPRO HERO ...
Timestamps:
0:00 Intro
0:38 Thank You
0:57 What's Included
1:25 Screw Removal
1:59 Colors Available
2:12 Install Screws in Mount
2:49 Remove Mounting Bolt
3:15 Install Side Screws
4:45 Install Front Screws
5:43 Camera Installation
6:22 Camera Mounting Angle
6:45 Why TPU and Not Hard Plastic?
7:40 Conclusion
Some of the links above are affiliate links, it doesn't cost you anything additional to use them but helps out the channel greatly, thank you!
Пікірлер: 28
Was looking everywhere for this mount, just ordered mine! great work thanks man.
This is awesome I just made a purchase I ordered a orange one, I just got the DJI Fpv about 3 days ago can’t wait to put my new GoPro on it
@AerialPixel
2 жыл бұрын
Thanks for your business! Fly safe!
the screws on the sides are too short. How did you manage to tighten them?
@AerialPixel
2 жыл бұрын
Unless you are using 3rd party hardware the original screws fit perfectly, no need for longer screws.
Some has problems with esc overheating? Is the mount the reason dont use this one got a one with only 2 bolts to hold it m8by thats the problem?
@AerialPixel
Жыл бұрын
Not heard of the ESC overheating and we've sold thousands of these mounts. Perhaps your payload is too heavy, what are you mounting to it?
@Dronesky98
Жыл бұрын
Go pro 11 with touchscreen The drone should easy handle it Got the mount from amazon The drone motors When i fly with go pro on the drone makes some wierd noises When i fly without the gopro than it sounds normal And The rotors get really hot with go pro on M8by its not enought stabled with two bolts mount
@julianabrahams9697
7 ай бұрын
Same problem here!! Almost blew my motors rigging my gopro 360. Did you find the solution? I have the same 2 screw camera harness by the sounds of it. ESC error. Hot motors. Gopro 360 appears to be the same weight as hero 10 etc. HELP@@Dronesky98
@FPVPulse
5 ай бұрын
Hei! You solvet? Got same issue@@Dronesky98
Wich props are those? Wich props you recommend? Thanks
@AerialPixel
Жыл бұрын
Those are the Dalprop Spitfire T5147.5 props, they are the ones I personally like best. You can find them here: amzn.to/3zaE7FK
@gonzafpv2843
Жыл бұрын
@@AerialPixel Nice ! Wich others did you tried out? Also, when using gyroflow with the go pro 8 hero black, do I need an movement file ? Or I just put the video? Thanks!
@AerialPixel
Жыл бұрын
@@gonzafpv2843 I also like the iFlight Nazgul props www.amazon.com/gp/product/B07W7T7MYJ?&linkCode=sl1&tag=aerialpixel-20&linkId=deb054bdf9f8eb6bb44e8c88dd5a4777&language=en_US&ref_=as_li_ss_tl On the Hero 8 the gyrodata is baked into the video file, there is no separate gyrodata file.
@gonzafpv2843
Жыл бұрын
@@AerialPixel si I just drop the file into gyroflow? Thanks men
@AerialPixel
Жыл бұрын
@@gonzafpv2843 Yes, just drop it in.
My 1.5mm allen key fits the two screws on the side but is too small for the 2 front top screws! Any ideas? 1.5mm too small, 2mm too big
@AerialPixel
Жыл бұрын
Unless you have replaced the screws in the past they are the same 1.5mm size. Your allen key may be shot, you may want to invest in a nice titanium nitride coated driver set, I recommend these: amzn.to/3VHwzTw
@Trykrome
Жыл бұрын
@@AerialPixel that’s what I thought, they are m1.6 but should fit a 1.5mm Allen key. Thanks for the reply and will buy that set you’ve linked hopefully will work.
Nice thanks for the video! Any trouble with gps when recording?
@AerialPixel
2 жыл бұрын
Not at all, our mount stays up further than most away from the GPS.
@Everything_FPV
Жыл бұрын
@@AerialPixel I'm having issues with GPS with your mount. GPS and wifi are off on GP10 but I still lose my homepoint mid flight. Any tips?
@AerialPixel
Жыл бұрын
The Hero 10 is an odd one, some have issues and some don't. From what I've heard the interference comes from the back screen area, some have blocked it by wrapping a piece of cardboard with aluminum foil and rubber banding it over the GoPro screen. I haven't had issues with the Hero 9 or 11 at all. The only camera I've had satellite loss with is the Insta360 One X2, I was only getting 8-10 satellites.
@Everything_FPV
Жыл бұрын
@@AerialPixel I FIXED THE GPS PROBLEM! I started playing with different frame rates. The GoPro 10 gives a lot of interference when using higher frame rates. I used 30 and 60 fps in NTCS and tried 50 fps in PAL. Still gps issues. THE KEY IS TO USE 24/25 FPS! No issues in 5.3k, 4k... So you don't have to lose any quality! Filming in 5.3k at 25 FPS works for me! No gps issues. I lost 1, max 2 sats but they stayed locked and didn't lose my homepoint.
@AerialPixel
Жыл бұрын
@@Everything_FPV Good find! Explains the hit-or-miss issue. Thanks for letting everyone know!
Nice stuff, I bought both mounts (front and rear) and had a nice flight with them! here is a quick review kzread.info/dash/bejne/onp7pslufcS7n7g.html and the final video using those mounts and hero 10 kzread.info/dash/bejne/fWeota2uhbzeiqw.html
@AerialPixel
2 жыл бұрын
Nice shots Kostas! Thanks for sharing!
@KostasGur
2 жыл бұрын
@@AerialPixel Thanks a lot!