Thanks bro I solved my problem with help of your video

@MototechWanderer

9 ай бұрын

Glad to know the video was helpful 🙂

Link on part 1 and 3 and 4 please.. Nice video it really helps especially DIY newbie like me

@MototechWanderer

2 жыл бұрын

Here is the whole series: kzread.info/head/PL-oCz_Y6APcLkv5yj0XF46D61aT-goHo6

Can anyone tell me valve clearance values for FZ S V2.0?

Can we use a bearing puller in place of hammering with a rod/screw driver for removing wheel bearing ? Is there enough space between the spacer and bearing's inner ring to slide in a bearing puller ?

@MototechWanderer

2 жыл бұрын

With the given space it difficult to use the bearing puller, but you can give it a try. I did not have a puller to try it.

Before fixing/hammering bearing in the wheel hub ,outer surface of the bearing should not be greased, some mechanics will do brazing on the bearing before fixing so that it will be a tight fit

@MototechWanderer

4 жыл бұрын

The bearing pits were absolutely perfect. Even with grease, the bearings sat perfectly snug. There is no way they can come out, unless hammered from opposite side. Thanks for the info though.

Cool bro

@MototechWanderer

4 жыл бұрын

Thanks bhai. 😊

I have 2017 fazer and sir i wanna see the videos on it's electric components like headlight, indicators etc. So plssss make some videos as soon as possible.

@MototechWanderer

3 жыл бұрын

The channel is full of electrical modds. Please explore more on my channel.

Hey bro can you suggest some best tool kit to repair FZ-S V2. Which tool kit do you use?

@MototechWanderer

4 жыл бұрын

All my tools are listed in the description. You can check them out and order what you want.

Super

@MototechWanderer

4 жыл бұрын

Thanks

My new Rolon chain is currently facing wobbling issues. Chain is moving zig zag. The rear wheel alignment is good. Front and rear sprocket is not bend, Slack tightness is correct. But chain is wobbling and can see the wobble in the rear wheel hub too, i changed the bush inside but issue still exist. If it's the bearing issue, then the whole alloy should wobble right but the alloy wheel is moving straight and there is no handling issues. Some said Rolon chain has this issue because it's very big chain compared to stock chain.

@MototechWanderer

3 жыл бұрын

By your description, it sounds like the rear sprocket bearing is worne out. Time to replace the sprocket bearing. The wheel will not wobble as wheel is supported by wheel bearings which are separate entities.

@storymaker_____

3 жыл бұрын

@@MototechWanderer Ok if the sprocket bearing is worned out the wheel wont wobble right. I thought if the bearing is worn out both the wheel and the hub wobbles

@MototechWanderer

3 жыл бұрын

If you go through my Fazer rebuilding series, you will clearly understand how the rear section of our bikes are designed. In short, wheel rotates on 2 bearings, one on each side. Sprocket sits on a separate bearing with a collar to hold it in place. In my Gladiator, the bearing had broken into pieces, chain was still good but made horrific noises. It took me some time to understand. I actually was lucky the chain did not break on me like my Fazer's incident.

@storymaker_____

3 жыл бұрын

@@MototechWanderer Thanks for your info bro. I will update once i change sprocket bearing. I'm using MT15 covered 40k kms. Recently i changed the swingarm of my MT15 with R15 V3 swingarm. First i thought it was tge swingarm issue but i've contacted people who changed it to v3 swingarm but none of them has this issue. Maybe it's the bearing. Do u know how much it cost

@MototechWanderer

3 жыл бұрын

@@storymaker_____ put up a video of your swingarm swap. There is always to learn from all of you. Bearing should cost anywhere between 120-250 INR.

Bhai mujhe fz ver 2 sproket bearing ka bush nahi mil rha service center pe bhi any idea where i can get it

@MototechWanderer

3 жыл бұрын

Local bike shops me enquire karo.

R15 v1 sprocket direct fit in fz v2?(14/42) Now i am using fz v1 sprocket, Any ideas?

@MototechWanderer

4 жыл бұрын

Nope. Won't be a direct fit. If you need more pickup, look for Pulsar 13T front sprocket.

@Ramesh_Ram

3 жыл бұрын

@@MototechWanderer R15 v2 sprocket in fz v2 ?? Too many sggstions from alrdy used customers for low end torque What is your sggstion sir...for high performance ????

Since you did this all by yourself I have one important question to you! The PCD of rear sprocket of FZ and the PCD of R15 V2 are same or not?

@MototechWanderer

3 жыл бұрын

They are not same.

@AhmedAli-jl6jy

3 жыл бұрын

@@MototechWanderer Thanks! I was about to procure fz chain sprocket for my Yamaha R15 V2 after doing all length calculations.

@AhmedAli-jl6jy

3 жыл бұрын

@@MototechWanderer you are wrong! Please don't missguide if you are not sure. Refer below below and get the facts right. kzread.info/dash/bejne/X5mX08x6oKfRgbg.html

Sir fazer v.1 ka sporket or fz v.1 ka sporket same he? or different heto kya Kya difference he answer kardo please

@MototechWanderer

4 жыл бұрын

Fz V1 aur Fazer v1 same hai. Same sprockets hai. Fz v2.0 and Fazer Fi same hai. V1 me pichhe waale me 40 teeth rehta hai aur v2.0 me 41 teeth rehta hai. Saamne dono na hi 14 teeth hote hai.

can you please suggest me a place to get Yamaha FZS - 2018 model spare parts ?

@MototechWanderer

Жыл бұрын

Check the video description

Gentleman I have Yamaha fz , recently I'm facing vibration and suddenly pickup dropping ,some times head light increase and drops automatically

@MototechWanderer

3 жыл бұрын

Regulator Rectifier unit gone - Headlamp increase Decrease Swing Arm Bush / Bearing gone - Vibration Air Filter & Sparkplug needs replacement - Low pickup.

Which chain sprocket brand you suggest to go with.

@MototechWanderer

2 ай бұрын

Go with Rolon or Yamaha original ones.

@TheAgust

2 ай бұрын

@@MototechWanderer what is the tappet adjustment value for exaust and intake for the fazer v2 which u have

@MototechWanderer

2 ай бұрын

@@TheAgust Inlet : 0.08mm to 0.12mm Exhaust : 0.12mm to 0.16mm

Could you please tell me the bearing number for sprocket, front wheel and rear wheel for FZ S V2.0?

@MototechWanderer

4 жыл бұрын

Need to check. I have lost the packets.

@AnkitKumar-qb7rw

3 жыл бұрын

Front and rear wheel bearing number - 6202 Sprocket bearing number - 6004

Hi brother i saw ur every video...i myself own a gladiator ss 125 and a fazer 2.0 fi version...can u please share dat, from whr did u installed the saddle stay all touring setup on ur fazer?? I wanna do it

@MototechWanderer

4 жыл бұрын

I had bought this from Nexus Gear. You can search their Facebook page or visit their website - www.nexusgears.com/

@anupamdalvi7752

4 жыл бұрын

@@MototechWanderer thannx for your valuable reply...keep growing..,💜💜

@anupamdalvi7752

4 жыл бұрын

@@MototechWanderer is it available at that site for fazer or u have fitted of another bike??

@anupamdalvi7752

4 жыл бұрын

@@MototechWanderer i have searchd in dat pag....m jst getting parts for yamaha fz 25

@MototechWanderer

4 жыл бұрын

@@anupamdalvi7752 Message them on their FB page they will definitely reply. I got it done on special order as I was their first Fz v2.0 customer. They have the design and can easily make you one now. 😊👍

Bro fz v2 rollon chain good or bad?

@MototechWanderer

4 жыл бұрын

It's very good. Just make sure the sprocket size and chain link count is exactly same as stock. 👍

Which is the best chain for fzsv2 for speed gud for engne

@MototechWanderer

2 жыл бұрын

Original Yamaha Chain or Rolon chain.

What is the cost of swing arm bro? Also what is the total cost of the work you done?

@MototechWanderer

4 жыл бұрын

Around 3000 INR in my city

why have you used 40 T rear sprocket ..of fz16 ??usually fzsv2 have stock 41T sprocket....By changing to 40 t mileage will increase but little bit lag in pickup.Anyway nice content .

@MototechWanderer

4 жыл бұрын

I use this mainly for touring. So a little relaxed engine is good for my use.

@MototechWanderer

4 жыл бұрын

Thanks for your appreciation. Do subscribe to my channel.

@Ramesh_Ram

3 жыл бұрын

@@MototechWanderer i need good performance bro..what about R15 v2 sprocket ( 15/47 ) for my fz v2 fi ?????

@moveworld3479

3 жыл бұрын

Suggest me the best chin kit for fzsv2 2018 model pls any one ...tel me the cost of shokbzarber price for fzs v2

My fz rear wheel sprocket hub is broken which is attached to chain sprocket and between the wheel... What is the name of that part? Is that part available???

@MototechWanderer

2 жыл бұрын

That's the rear wheel hub.

@sandeshgokarnkar2898

2 жыл бұрын

@@MototechWanderer can i get that part whats the cost

@MototechWanderer

2 жыл бұрын

I think it was around 800-1200 something.

any solution for uneven chain slack???

@MototechWanderer

4 жыл бұрын

If after heavily cleaning the chain with diesel / petrol / kerosene. And lubing it doesn't become fine, the chain needs replacement. By default every chain had a maximum and minimum area of slack.

How much is the cost of axle nut and bolt?

@MototechWanderer

9 ай бұрын

Don't remember exactly, but under 200 INR.

V3 k spoket v2 mai dal sakte hai

@MototechWanderer

3 жыл бұрын

Haan daal sakte hai.

Hello my Fz rear tire bend towards left . Whats to do . Ithink the sringamm is bend

@MototechWanderer

4 жыл бұрын

First check the allignment properly with the chassis (not with mudflap). If you still feel it's off the axis, replace the swing arm.

@favazk5705

4 жыл бұрын

But alignment lines are correct both side

@favazk5705

4 жыл бұрын

And my rpm meter not working .is there any sensor for that

@MototechWanderer

4 жыл бұрын

@@favazk5705 remove the Speedometer console plug and spray some WD40 on the pins and scrub with a tooth brush. It should work.

Bro , kya 40 teeth chain sprocket se pickup bike ka kam ho jayega aur chain zyada din tak nahi chalega, meri fzs mein 41 teeth ka sprocket hai aur muje 41teeth ka sprocket nahi mil raha to main 40 teeth walo daal sakta hoon.

@MototechWanderer

3 жыл бұрын

Pickup halka sa kum hoga. Chain life same rahega.

@sumitkuwar526

3 жыл бұрын

@@MototechWanderer bro meri chain set 26k km chal gai main bahut gentally drive karta hoon to approximately ye chain set 20k km tak to chal sakta hai na.

@MototechWanderer

3 жыл бұрын

Depend karta hai chain and sprocket condition pe. Agar aap properly maintain karte ho, toh bilkul chal sakti hai. Like har 500-700 kms pe lubing and 1000-1200 kms pe cleaning+ lubing.

@MototechWanderer

3 жыл бұрын

Generally sirf front sprocket jaata hai ... Bas usko replace kar lo.

@sumitkuwar526

3 жыл бұрын

Bro,but meri bike ki chain ke roller losse ho gaye hai uski wajah se chain noise aata .

sprocket mounting bolts link bro please?

@msringtonestudio

Жыл бұрын

Bro Please Provide link

@MototechWanderer

Жыл бұрын

I got it from Yamaha dealer. You can get them from any Yamaha spares dealer or order from the person whose number is mentioned in the video description.

Bro can u provide number of sprocket bearing for fzs v2

@MototechWanderer

4 ай бұрын

Part No. : 93306-054Y5

So total 3 bearings?? For rear?

@MototechWanderer

2 жыл бұрын

Yes, 2 wheel bearings and 1 sprocket bearing.

I had a question I have a fzsv1 2013 what's the largest back tyre I can go for without any modifications in the stock swing arm .... I was thinking about just upsizing from 140 to 150 .. will there be any rubbing? Please help me out brother I can find someone giving concrete answers

@MototechWanderer

3 жыл бұрын

140 is stock. 150 is still manageable without any modifications. 150/60 R17

Bro how much cost for sprocket hub

@MototechWanderer

Жыл бұрын

I don't remember correctly but it must be under 600 INR.

Two bearings for a wheel yeah ?

@MototechWanderer

3 жыл бұрын

Yes

Chin spoke cost pls yamaha original?

@MototechWanderer

2 жыл бұрын

1500-1800 INR

It would be better if u mentioned price of spares aswell

@MototechWanderer

2 жыл бұрын

Prices might change with time. Part numbers can be used as reference to get price list from local showrooms / spare shops.

Please tell me bearing size and number or company name..?

@MototechWanderer

3 жыл бұрын

Check the description of the video.

You should be mention to bearing parts number ☺😊

@MototechWanderer

4 жыл бұрын

Wheel Bearings 93306-252XG 93306-252YH 93306-202XT Sprocket Bearings 93306-054YA 93306-054Y5 Oil Seal Wheel 93106-22808 Oil Seal Sprocket 93106-26801

Can you tell me the cost of both the axle rod

@MototechWanderer

3 жыл бұрын

As far as I remember they were some 100-200 INR each.

@MototechWanderer

3 жыл бұрын

As far as I remember they were some 100-200 INR each.

@simant7699

3 жыл бұрын

@@MototechWanderer thnks

Back tyre bering number. .?

@MototechWanderer

3 жыл бұрын

Check the video description, everything is mentioned.

Bro bearing price?

@MototechWanderer

4 жыл бұрын

100 INR each.

What is the difference in top speed

@VIVEKYADAV-cy8jy

4 жыл бұрын

Bro tell me the difference plz

@MototechWanderer

4 жыл бұрын

Almost no difference in Top Speed. It will just keep the highway cruising lil relaxed.

@VIVEKYADAV-cy8jy

4 жыл бұрын

Thank you brother

Swing arm cost pls ..new one

@MototechWanderer

2 жыл бұрын

2000-3000 INR

Total cost batao sab bearing ka please reply fast

@AlexSmith-to3tv

4 жыл бұрын

Mera front and rear and sprocket bearing change karna hai kitna cost aayega total bearing kitne ka ayega ya phir bahar se skf ka lelu konsa accha rahga yamaha parts ka ya skf ka ?

@MototechWanderer

4 жыл бұрын

Bearing 100 Rs each. Chain speocket set 1700 INR approx.

chains pocket bearing number

@MototechWanderer

Жыл бұрын

Everything in video description

Neet work

@MototechWanderer

3 жыл бұрын

Thank you

@MototechWanderer

3 жыл бұрын

Don't forget to subscribe to watch more such DIY videos.

This chain supports fzs v2

@MototechWanderer

3 жыл бұрын

Yes it does.

This chain gives better mileage?

@moveworld3479

3 жыл бұрын

Reply me bro

@MototechWanderer

3 жыл бұрын

I won't say that. This chain will not make any significant difference other than lower RPM for a given speed and slight drop in the pickup.

@moveworld3479

3 жыл бұрын

This chain gives beter milage? Suggest best chain

@moveworld3479

3 жыл бұрын

Thanks now I am subscribe u r chanel gud work bro ..shokbzarber cost chappagalara...

@moveworld3479

3 жыл бұрын

Thanks now I am subscribe u r chanel gud work bro ..shokbzarber cost chappagalara...

Please sab ka price bata do please

@MototechWanderer

4 жыл бұрын

Swing Arm : 2800 INR Sprocket Chain set : 1600 INR

@MototechWanderer

4 жыл бұрын

Beerings were approx 50-100 INR per piece.

Never replaced the sprocket nuts.. 40k+ kms

@MototechWanderer

4 жыл бұрын

Actually not needed. In my case it got grinded by the chain at high speed.

Bhai bearing size kya h?

@MototechWanderer

3 жыл бұрын

Not sure. The bearing part numbers are in the description.