You have to move both adjusters back at the same time before you measure chain slack. As you move the other side back you are taking tension out of the chain.

@MototechWanderer

5 жыл бұрын

May be the video was a little misleading there but that's exactly how I did it. Thanks for pointing it out.

Thanks for putting this up. Helped a lot!

@MototechWanderer

5 жыл бұрын

Glad it helped. Do subscribe to the channel.

thank u man ,i was looking for these from so many days i didn't get the correct one , finally u did it ,thank u so much

@MototechWanderer

3 жыл бұрын

Glad it helped you 😊🙏🏼

Thank you bro, that scale instruments you have made practical.

@MototechWanderer

2 жыл бұрын

You're welcome 😊👍🏼

thanks a lot bro. I finally learnt it. thank you :) please keep uploading such videos 😄😄😄

@MototechWanderer

7 жыл бұрын

Glad it helped you. More videos coming up .

Thanks, that was really helpful

@MototechWanderer

7 жыл бұрын

Rahul NS Thanks buddy. Do LIKE & Subscribe to my channel.

Thanks dude.. Its useful

@MototechWanderer

6 жыл бұрын

Nithiyakumar K Glad to know. Don't forget to subscribe to my channel for more such videos.

Very nice bro.. helped me alot 💪

@MototechWanderer

2 жыл бұрын

Thanks ... Glad to know. 😊👍🏼

We can also adjust the alignment by simply keeping the tyre at equal distance from the both swingarms!

@MototechWanderer

5 жыл бұрын

Yes... But might not always be accurate.

@handersonlyngkhoi7270

4 жыл бұрын

I think better you upload video so we too can learn bro

very useful demo for chain slack adjustment. i have a fzs v2

@MototechWanderer

5 жыл бұрын

Thank you. Glad you found it helpful. Do consider subscribing to my channel.

@MototechWanderer

4 жыл бұрын

@TONY STARK what's so funny buddy ?

@handersonlyngkhoi7270

4 жыл бұрын

Yes very useful.I have v3

@MototechWanderer

4 жыл бұрын

@@handersonlyngkhoi7270 thank you. Glad you found it useful.

Neatly explained.. Thanks a lot..

@MototechWanderer

7 жыл бұрын

Thank You.

@MototechWanderer

7 жыл бұрын

Same technique on most of the Indian Bike.

Nicely explained, how to figure out a worn chain or whether i need to change chain sprocket, kindly upload a short video for the same

@MototechWanderer

7 жыл бұрын

vishrut shah Surely will do that. Thanks for watching. Do Subscribe to my channel if you haven't yet.

excellent..thank u

@MototechWanderer

4 жыл бұрын

Welcome 😊

Nice information bro

@MototechWanderer

5 жыл бұрын

Thanks buddy.

Great Video. YSC has screwed this up purposely. Have to get this adjusted myself.

@MototechWanderer

6 жыл бұрын

Manish Nanda Do it. Take your time. Its easy.

@MototechWanderer

5 жыл бұрын

Please do so.

Informative

@MototechWanderer

5 жыл бұрын

Thank you 😊. Do subscribe to my channel.

Thanks this is good demonstration

@MototechWanderer

4 жыл бұрын

Thank you. Do subscribe to my channel for more DIY videos.

@handersonlyngkhoi7270

4 жыл бұрын

Is it fine to tie axle nod after test drive Bro?

@MototechWanderer

4 жыл бұрын

@@handersonlyngkhoi7270 I would not suggest to test drive without tightening the axel nut. You don't need to tighten it 100% while test drive. Once it's final, then tighten it fully.

Really helpful brother👍👌

@MototechWanderer

6 жыл бұрын

Joseph Samuel Thanks a lot. Don't forget to subscribe to my channel.

@josephsamuel7044

6 жыл бұрын

Mototech Wanderer Bro I am already there in your subscribers list😊

@MototechWanderer

6 жыл бұрын

Joseph Samuel Great. Thanks again.

wow thanks bro finally learn it , can u plz tell me what is the best option for chain, among chain lubricant and engine oil

@MototechWanderer

5 жыл бұрын

For chain use Tribocor or Motul. For engine oil use Motul or Yamalube.

@Boo-bro

5 жыл бұрын

@@MototechWanderer thanks a lot bro

@MototechWanderer

5 жыл бұрын

Welcome

what size spanner did you use?

@MototechWanderer

7 жыл бұрын

Watch from the beginning, everything is explained.

Sir iam having fz new one bs4 model i have one problem that when we go to potholes the bike sound very bad because of the chain touch rubber i serviced chain. Then also it making sound.Then i have placed hitlon it is wearing fast what to do for this problem???

@MototechWanderer

6 жыл бұрын

Rahul Biker just check if chain guide (the rubber part) is in good condition or not. If needed replace the chain guide. Adjust the chain a little more so that it doesn't touch swing arm on potholes.

@RahulBiker

6 жыл бұрын

Mototech Wanderer thanks sirr

Have u ever done tappet tuning of your bike.... ,If u had done already can u make a video of it ...my bike has no tappet noise yet but there is a small noise from engine head and I think valve is quite losse ... if u have any opinion regarding this ....

@MototechWanderer

4 жыл бұрын

I have done it once. Will make a video soon.

@lawrencelhouvum

4 жыл бұрын

@@MototechWanderer waiting in anticipation

is it necessary to tighten the nuts in equal amount in left and right side

@MototechWanderer

7 жыл бұрын

Yes. That keeps the balance right.

@ashfaqueahamed2050

6 жыл бұрын

Otherwise you lost your alignment

helpful

@MototechWanderer

7 жыл бұрын

Thank you

sir i also have fazer v2 and i suffering from the chain noise issue in 3 gear slow speed . i observed that you removed the lower fibre part from chain . is that helps to reduce noise ? i adjusted chain slacks but after 1 2 weeks noise keep coming

@MototechWanderer

3 жыл бұрын

Your sprockets are gone mostly. It calls for a replacement.

@Akshaymate47

3 жыл бұрын

@@MototechWanderer same thought come into my mind so i changed it mounth ago but still not fix it

love you bro.. i wanted those symptoms of tight chain.. my bike's chain is too tight

@MototechWanderer

7 жыл бұрын

Shreenarayan Sabannavar Thanks a lot bro. Too tight chain makes clattery noise when you ride, start to move from stand still. Also you get poor fuel efficiency and performance. Just do the reverse process of what is shown in the video if you want to loosen up your chain slackness.

@MototechWanderer

7 жыл бұрын

Shreenarayan Sabannavar Thanks a lot bro. Too tight chain makes clattery noise when you ride, start to move from stand still. Also you get poor fuel efficiency and performance. Just do the reverse process of what is shown in the video if you want to loosen up your chain slackness.

Your video is very detail and nice.and i would like to know if you have any idea about oil in the front disc brake.last evening i saw some oil drip from the front disc brake of my bike after taking my bike for practice .mine is an old fzs 2012 model.please answered at asap

@MototechWanderer

6 жыл бұрын

Thanks a lot! Check if the bleeding screw is tightened or not. Also check of your fork oil seal is leaking and the oil is dripping.

I have done as it as done .but the stripes on frame is not equal is there any problem. or danger with that!!

@marcoantoniomonroy9879

7 жыл бұрын

I'M A dukerr it is missalligned

@MototechWanderer

7 жыл бұрын

There can be a little mismatch in the markings, a little here and there would not make much of a difference. If its too confusing, you can use a scale of measuring tape to get correct measurement on both sides.

I cant able to loose the axile nut itbis very tight...please give me some idea to loose the nut

@MototechWanderer

6 жыл бұрын

lovely ashwa get it loosened by a local mechanic. Also try spraying WD40.

Hello bro....can u put a video on how to get free clutch play on fz150...thanks

@MototechWanderer

6 жыл бұрын

Rougeot Luccas Sure. Will do that. Thank for watching.

Hi could you upload a video to change the RPM of FZ Fi. Thnk you

@MototechWanderer

7 жыл бұрын

Sure will do that as well. Thanks for the suggestion. Do share and subscribe.

@rougeotluccas2709

6 жыл бұрын

Can fz do that or its just 4 gixxr 150

@MototechWanderer

5 жыл бұрын

kzread.info/dash/bejne/rKmdrK2ahN23nNI.html

Sir there is a plug near gear shifting peddle what is it for?

@MototechWanderer

6 жыл бұрын

Irfan Sofi That's a magnetic switch which senses Neutral .. and displays the N light on the speedometer console.

@irfansofi8288

6 жыл бұрын

Motorway Wanderer sir my bike chain is tight in neutral but when i shift gears it loses with each gear . what to fo?

@MototechWanderer

6 жыл бұрын

May be chain is reaching the end of its service life. Might need a replacement.

How can we reduce chain noise in FZ. I have changed chain and sprocket recently. But after few days, I can see chain sound again. I will clean the chain every 300km and lube it with gear oil. Can anyone tell me how I can reduce chain sound.

@MototechWanderer

4 ай бұрын

Try adjusting the slack and check for wheel alignment. Use silicon based chain lube.

@technofun80

4 ай бұрын

@@MototechWanderer Thank you for your reply. Previously I was using silicon based grease but still same sound. Hence, I switched to gear oil

the Chain seems to be really clean how much clean this much at 15k kms

@MototechWanderer

7 жыл бұрын

Shivansh Batham I had thoroughly cleaned the drive chain using kerosene and tooth brush.

@TheStylev

7 жыл бұрын

Yamaha Fazer dude even after doing this after few days my chain is back again loose! what should I do?should I entirely change my chain socket? pls reply

@MototechWanderer

7 жыл бұрын

Its unfortunate how bad the quality of chain is on Fz v2.0. You can also fix Fz v1 chain Sprocket set , it will add a little more top end. Cannot comment on the durability of the chain.

@biprojithmandal2011

7 жыл бұрын

is there any effect on mileage after changing fz 2.0 chain sprocket with older version fz16. because fz 2.0 has 42Tooth sprocket

@arai6147

3 жыл бұрын

@@biprojithmandal2011 you should get higher mileage

Bro my bike is fzs v3. It's chain is tight, can i loose it by myself instead of taking it to a mechanic....?

@MototechWanderer

4 жыл бұрын

Yes. Absolutely. Do it yourself.

@rahulrajan6930

4 жыл бұрын

👍👌

Hai bro please can u show me one's change my bike Thayer from that I get problems back brake suggest me easy method bro please R15 V1

@MototechWanderer

5 жыл бұрын

Will try to make a video.

very clear and informant tutorial nice job man i badly need to alling my chain thnx

@MototechWanderer

7 жыл бұрын

mekash singh Thanks buddy :) Do subscribe to my channel if you haven't yet.

@makcoolmekash

7 жыл бұрын

Yamaha Fazer dude my fzs has no lock nuts on both side. what now???

@MototechWanderer

7 жыл бұрын

mekash singh can be bought in any hardware shop.

Neat :)

@MototechWanderer

7 жыл бұрын

Thank you :)

@MototechWanderer

5 жыл бұрын

Thank you bro.

What's the size of lock nut & slack adjusting nut of FZ V3? Plz reply

@MototechWanderer

4 жыл бұрын

Size 12mm both

@gijopjacob1985

4 жыл бұрын

Thank u

@MototechWanderer

4 жыл бұрын

@@gijopjacob1985 you're welcome buddy.

Greatt

@MototechWanderer

5 жыл бұрын

Thanks

good

@MototechWanderer

5 жыл бұрын

Thanks. Consider subscribing to the channel.

Upper side of chain touches a rubber thing know

@MototechWanderer

6 жыл бұрын

That's the drive chain guide. It's normal.

purpose solved. but video can be short and no music please. We cannot hear you in that music. Also, you need to follow the process to adjust both adjusters at same length and measure slack.

@MototechWanderer

2 жыл бұрын

Thanks 😊👍🏼... Watch the other videos, I hv worked on the audio in later videos.

Brother video super & People Don't trust Yamaha technicians ENGINEERS they are unfit for Technical ENGINEERS use this brother technique for more life span of chain & sprockets wheel

@MototechWanderer

4 жыл бұрын

Thank you brother. 😊

bro if install rear disc break how much cost?

@MototechWanderer

2 жыл бұрын

15-20k easily ... Swing arm, rims, forks, calipers, disks needs to be changed too

@sanjay7090

2 жыл бұрын

@@MototechWanderertq fr reply bro...its too costly

bro What is the wrench size of rear wheel bolt?

@MototechWanderer

3 жыл бұрын

17-18mm AFAIK

@adityapeeta4865

3 жыл бұрын

@@MototechWanderer mine is v3 bro. I went to mechanic shop he given me the spanner it's 22mm. Maybe 17-18mm is for v2. Anyway thanks bro

@MototechWanderer

3 жыл бұрын

@@adityapeeta4865 okay👍

How to decrease chain slack

@MototechWanderer

3 жыл бұрын

Watch the video. Everything is explained in this video.

rear sprocket teeth????

@MototechWanderer

5 жыл бұрын

41 Teeth

Every rider should know some basic repair work. I learnt something useful today. Thank you.

@MototechWanderer

6 жыл бұрын

Kapil Hazarika well said. Happy my video helped.

@MototechWanderer

5 жыл бұрын

Thanks. Consider subscribing to the channel.

Fazer breack how to chake

@MototechWanderer

3 жыл бұрын

There is a notch on the brake plate. That shows the shoe life and wear.

Purpose of change bro..??

@MototechWanderer

4 жыл бұрын

It's a slack adjustment video.

nice info. only one request please speak lil louder.

@MototechWanderer

6 жыл бұрын

rowdy rathod sure Buddy. Working on the audio. Watch the recent videos.

I need to adjust every week, I don't know why?

@MototechWanderer

3 жыл бұрын

Either not properly lubed and cleaned or the alignment is incorrect.

@DikaKhawlhring

3 жыл бұрын

@@MototechWanderer this happen after the mechanic change the sprocket

@MototechWanderer

3 жыл бұрын

@@DikaKhawlhring something is not right. Was the kit used original Yamaha part

@gpame265

2 жыл бұрын

I have to adjust after every 20 30 kms 😂😂

@DikaKhawlhring

2 жыл бұрын

@@gpame265 😂😂

Bhai bo Kansas Book hai

@MototechWanderer

2 жыл бұрын

User/ owner manual

Why do you had to put the useless music at the background. We can harldy hear your voice. Either be more audible or remove the unnecessary background music. Pleaseeee. haath jodta hun.

@MototechWanderer

5 жыл бұрын

Ok sir. I have worked on the audio of my videos. Please check the rest of the videos and let me know if they are fine or not. Thanks for the criticism. It help me improve.

How to loose chain

@MototechWanderer

4 жыл бұрын

The reverse process of what I did ... Adjustment bolt to be rotated conter clockwise.

@eu_sou_arun

4 жыл бұрын

Kk

@eu_sou_arun

4 жыл бұрын

My chain touching swingarm noise what to do losing or tightening

@MototechWanderer

4 жыл бұрын

@@eu_sou_arun tighten the slack to correct value. Also check if the chain guide (rubber) is present and in good condition.

@eu_sou_arun

4 жыл бұрын

@@MototechWanderer chain ruber good condition

Use proper tools. You damage the axle nut. Better to use ring spanner 6 point

@MototechWanderer

4 жыл бұрын

True. I have bought it now.

@adityapeeta4865

3 жыл бұрын

@@MototechWanderer what size is that bro

were u talking to ur self??????

@MototechWanderer

7 жыл бұрын

Was trying to talk to my viewers buddy. Somehow the sound capture did not turn up well. Sorry for that. Why don't you try to use earphones, it will help. Thanks for watching. Do subscribe to my channel if you have not yet.

@thippeswamydr8586

7 жыл бұрын

Yamaha Fazer Yeah actually the video quality s damn good but the audibility is weak! keep it up being much more videos

@MototechWanderer

7 жыл бұрын

thippu thippesh Thanks a lot buddy. Your appreciation keeps me going. Will be making more such videos and try to record better sound.