Nicely done and thanks for the links. I saw the wheel walking when you were rolling it; try loosening the nuts/bolts a little, mount the wheel again, roll it back and forth and perhaps the rollers will find their own 'alignment'. Mark that alignment and then tighten it all up again.
@batvette3523
2 жыл бұрын
thank you, I will try that.
@cccxcii66482 жыл бұрын
Very nice. Thanks. I was shopping around for stands and the prices were too much to justify for use only 2 to 3 times a year. Maybe for pros, but this is for the weekend warrior such as myself.
@TheBarracuda06 Жыл бұрын
If you want more padding on the roller use pool noodles/pipe padding and zip ties. Replace when they wear.
@batvette3523
Жыл бұрын
That is not a bad idea. 🤔I will try it and let you guys know. Thank you 👍
@momomotorsports8 ай бұрын
This is a great idea. I have been wanting to make one of these for a few years. Just what I needed. Thanks man!
@batvette3523
7 ай бұрын
Extremely happy I can help. I am making a new version soon.
@rayperez912611 ай бұрын
Nice 😊👌
@D1G1TALSYNAPS3 Жыл бұрын
Great idea. Thanks for the link. I’m gonna modify this to my application. Love it. Where did you get those lights above?!
@batvette3523
Жыл бұрын
Thanks I got those light’s from Amazon
@jesusmcortijo9771 Жыл бұрын
Thanks for the video. Where you found the lights on the ceiling?
@batvette3523
Жыл бұрын
I bought it from Amazon
@cccxcii66482 жыл бұрын
I have 20x12 inch wheels, would i need a longer (wider) roller? I was looking at the 17 inch rollers
@batvette3523
2 жыл бұрын
Happy to help bro, I would recommend wider one’s. I only use mine on my Vette or the Trans Am.👍
@D1G1TALSYNAPS3
Жыл бұрын
I’d guess as long as the rollers cleared the brackets you don’t need wider rollers. It’s supported in the middle.
@jordanle8691 Жыл бұрын
What size are those wheels on the stand?
@batvette3523
Жыл бұрын
19 x 10 for the rear. 18 x 9.5 for the front
@bryanwilmot13 ай бұрын
What size bolts did you use how long
@batvette3523
3 ай бұрын
Wuz up bro, for that I bought a case of bolt from Auto Zone for American cars. And I checked which one fitted. Hope that helps.
@chipdiamond2628 Жыл бұрын
Not a bad idea , but the wheel is walking it can fall off.
@batvette3523
Жыл бұрын
I have made upgrades to it, that will be in a later video. I appreciate your feedback thank 👍
Пікірлер: 28
Great idea, well shown!!
Nicely done and thanks for the links. I saw the wheel walking when you were rolling it; try loosening the nuts/bolts a little, mount the wheel again, roll it back and forth and perhaps the rollers will find their own 'alignment'. Mark that alignment and then tighten it all up again.
@batvette3523
2 жыл бұрын
thank you, I will try that.
Very nice. Thanks. I was shopping around for stands and the prices were too much to justify for use only 2 to 3 times a year. Maybe for pros, but this is for the weekend warrior such as myself.
If you want more padding on the roller use pool noodles/pipe padding and zip ties. Replace when they wear.
@batvette3523
Жыл бұрын
That is not a bad idea. 🤔I will try it and let you guys know. Thank you 👍
This is a great idea. I have been wanting to make one of these for a few years. Just what I needed. Thanks man!
@batvette3523
7 ай бұрын
Extremely happy I can help. I am making a new version soon.
Nice 😊👌
Great idea. Thanks for the link. I’m gonna modify this to my application. Love it. Where did you get those lights above?!
@batvette3523
Жыл бұрын
Thanks I got those light’s from Amazon
Thanks for the video. Where you found the lights on the ceiling?
@batvette3523
Жыл бұрын
I bought it from Amazon
I have 20x12 inch wheels, would i need a longer (wider) roller? I was looking at the 17 inch rollers
@batvette3523
2 жыл бұрын
Happy to help bro, I would recommend wider one’s. I only use mine on my Vette or the Trans Am.👍
@D1G1TALSYNAPS3
Жыл бұрын
I’d guess as long as the rollers cleared the brackets you don’t need wider rollers. It’s supported in the middle.
What size are those wheels on the stand?
@batvette3523
Жыл бұрын
19 x 10 for the rear. 18 x 9.5 for the front
What size bolts did you use how long
@batvette3523
3 ай бұрын
Wuz up bro, for that I bought a case of bolt from Auto Zone for American cars. And I checked which one fitted. Hope that helps.
Not a bad idea , but the wheel is walking it can fall off.
@batvette3523
Жыл бұрын
I have made upgrades to it, that will be in a later video. I appreciate your feedback thank 👍
@r1lukasz
Жыл бұрын
@@batvette3523 can You please show us upgrade?
@batvette3523
Жыл бұрын
@@r1lukasz I will, thanks for the feedback
@patjoly3776
Жыл бұрын
Following
@ippytuklulu
7 ай бұрын
@@batvette3523you got an update video?
🫡👍👍👍
I agree wheel rollers are way over priced.