Trim Router Table Plans: bit.ly/3LQvOFB

@stephenhollowell5270

Жыл бұрын

Sir: You are a craftsman. Your work is amazing.

That's the most ingenious idea ever, especially being able to use the saw fence at the router.

You really put some manufacturers to shame with the quality of the things you design and build ... also the functionality of your designs will either match or (most likely) exceed the capabilities of commercially available products ... superb 👍

@Paoson_Woodworking

Жыл бұрын

thanks!

Small Shop Nirvana almost achieved with these kind of utilitarian fixtures. Thanks for sharing!

You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice kzread.infoUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.

Suso, es usted un maestro! Como siempre, impecable.

Awesome creativity again Suso! Love the MatchFit assembly table idea to come!

Incredible craftsmanship and attention to detail. Inspiring stuff as usual.

@Paoson_Woodworking

Жыл бұрын

thanks!

I want to congratulate you on the quality of work and videos you do. The detail is just wonderful

As usual, a very well-designed, well-executed and useful build.

Another great project shown in an excellent video...always my favorite videos to watch.

brother you are amazing, genius project.

*Great Small Moveable Router Table Cool Awesome!!* 👍🏻

Your work and your videos are simply incredible, it's a work of great precision I appreciate.

@Paoson_Woodworking

Жыл бұрын

thanks!

Wouah 🤩 Bravo pour ce travail de très grande qualité, c'est la super classe 👍

Nice project!!! 👍

Great work. We shared this video on our homemade tools forum this week 😎

As usual, your designs are ingenious, well thought out, and VERY workable. This time, the only thing I am not too happy with is the ON/OFF capability but with a TRIM router, there are no wires for an emergency on/off capability. Therefore ....not a good idea but it is accessible from almost any direction.

Super bravo maestro👍💐

SUBSCRIBED!!! love this design!

Super, bravo maestro 🔥💪👌👍

I love that MDF top. For some reason our stores here in the US do not carry colored MDF. Very frustrating!

@Paoson_Woodworking

Жыл бұрын

check this out: trinityinnovations.net/product/colored-mdf-panels/

amazing work, it turned out wonderful! 👏👏👏

Un muy opinión The best Diy compact Router table

This is great! I wish we could get the Black MDF here in the U.S. .

@Paoson_Woodworking

9 ай бұрын

www.paoson.com/blog/en/how-to-modify-the-folding-woodworking-workstation/

Important topic is how you make the router lift with the plunge-base 😮

7:13 One more of the many, many reasons why a good tool manufacturer needs to make left blade track saws for right-handed users!

Great setup! What did you use for finish on the black MDF?

@Paoson_Woodworking

Жыл бұрын

thanks! spray matt nitrocellulose

11:18 Are you using drywall board screws? They are made of a cheap, brittle alloy, I would not recommend them for machine building. In this case I doubt anything bad could happen, you have 12 screws holding the router and that is probably more than enough in this case even if those screws are 5 times weaker than any machine screw, BUT when building various machines, please keep in mind that most screws used in manufactured machines are not random screws. There are few kinds of "machine screws" that are highly resistant to vibration, tensile strength, etc. Sorry if I messed up something with my spelling, english is not my first language.

Great build! Whats your experience with the router lift? Can you lock it in position so the lift doesn’t move? Is the base included or do you have to modify your own router plunge base?

@Paoson_Woodworking

5 ай бұрын

works great, and includes the plunge base: www.paoson.com/forum/viewtopic.php?f=22&t=872#p9889

Which Dewalt table saw would work with this build. 8.5” 10” saw? Which model? Thanks

👍👍👍

Hello, Can you tell us wich router template you are using for the inserts? En wich router lift did you use? Kind regards from the Netherlands 🇳🇱

@Paoson_Woodworking

Жыл бұрын

I don't recommend this router template, it has little support surface for the base of the router: amzn.to/3XHUxjY Check this out: www.paoson.com/forum/viewtopic.php?f=22&t=872#p9889

I enjoy watching your videos and sometimes using some of your ideas. Also, I assume you already know by now you were talking about the TABLE saw and not the bend saw as you multiple times mentioned in your voice-over. That thing with a big turning blade (the yellow DeWalt) is a table saw (job site size, in your case). I guess you were just too tired for that day.

@Paoson_Woodworking

Жыл бұрын

I had understood that these small table saws are also called bench saw, right?

i can see that you are using piher clamps i would like to buy can you mention how can we buy this 🙏

@Paoson_Woodworking

Жыл бұрын

www.paoson.com/forum/viewtopic.php?f=22&t=273

How did you do lift router ? Thank you

@Paoson_Woodworking

Жыл бұрын

www.paoson.com/forum/viewtopic.php?f=22&t=872#p9889

Hi. can You tell me where to buy oak wood and other tweard wood in spain? I'm moving near Alicante in the fall and it would be good to know.

@Paoson_Woodworking

Жыл бұрын

you have one of the largest wooden shops in valencia, google "Tamalsa"

@slodziaksos

Жыл бұрын

@@Paoson_Woodworking 👍

where are the layout specs drilling and dados

what is the black board called what type of material is that.

@Paoson_Woodworking

9 ай бұрын

www.paoson.com/blog/en/how-to-modify-the-folding-woodworking-workstation/

Where is the Adjustable Router Jig from?

@Paoson_Woodworking

Жыл бұрын

I think there are better, it has a small support surface for the router: amzn.to/3pLy20K

@WeedyFNF

Жыл бұрын

@@Paoson_Woodworking How about the router lift? can you post a link for that? Great job by the way! Love your stuff

@Paoson_Woodworking

Жыл бұрын

check this out: www.paoson.com/forum/viewtopic.php?f=22&t=872#p9889

Do you think the Enjoywood router lift works with your design? kzread.info/dash/bejne/nJ1k1NOGlrnHdNY.html

@Paoson_Woodworking

Жыл бұрын

I think that router lift is too heavy for this design