Had watched such dampening sheets and this process on various car modification channels of many Indian KZreadr, but they didn't explain it properly. Thanks to you, now I understand this process and whole point of it.

@MototechWanderer

3 жыл бұрын

Glad the video could explain you what you wanted to know / learn. Thanks for watching. 😊🙏🏼

@SPEEDYDCOSTA

3 жыл бұрын

@@MototechWanderer I want to see the test from inside. You did so much of hard work but what's the use when you don't let us know the difference from inside

@MototechWanderer

3 жыл бұрын

The reason I could not post a before & after if because I do not have a proper 'before' footage. On of the wheel bearings were shot and it sounded really bad. I can very well put an 'after' footage but there is nothing to compare it with.

@SPEEDYDCOSTA

3 жыл бұрын

@@MototechWanderer please put it sir and you can compare it with car not done

Wasn't expecting this big project buddy! Your channel is slowly turning into Indian version of Chris Fix!!! Clearly seeing increased amount of dedication and seriousness in the content. Wish you all the best!!

@MototechWanderer

3 жыл бұрын

Thank you so much. Your appreciation keeps me motivated 😊😊🙏🏼🙏🏼

This is definitely the most significant improvement to the drive quality. Kudos!

@MototechWanderer

3 жыл бұрын

Thanks. Post this process I upgraded the tyres and that completely changed the feel of the car.

@k-trailblazer

3 жыл бұрын

@@MototechWanderer that's more than coincidence to have both coming together, isn't? Haha. Always getting suprises here man. Cheers buddy!

@k-trailblazer

3 жыл бұрын

You want to know about another coincidence? I changed my rear tyres too. Alignment pending. Hehe.

@MototechWanderer

3 жыл бұрын

@@k-trailblazer haha ... That's indeed a coincidence 😁👍🏼

Very nice...loved it... You have been focusing on doing minimal work which could be done by anyone. Don have to take it to a expert or a mechanic.. please continue to keep the fundamentals minimum no matter how big your channel grows in the future. People would rather choose easy things than complicated.. Please continue the good work..I ve been a subscriber of your channel because its has many good DIY projects...

@MototechWanderer

3 жыл бұрын

Thank you so much. 😊🙏🏼... You appreciations keep me motivated.

Hi sir...your content is awesome..the work was very properly done like a professional..enjoyed it..

@MototechWanderer

2 жыл бұрын

Thank you so much. 😊🙏🏼 ... Glad you liked it.

Nice 👏 Long video, but much needed, Much much needed

@MototechWanderer

3 жыл бұрын

Thank you 😊🙏🏼

Liked b4 starting the video.

@MototechWanderer

3 жыл бұрын

Thank you so much 🥰❤️🙏🏼🙏🏼😊

Most detailed video ever! And as always clean work!

@MototechWanderer

3 жыл бұрын

Thanks a lot 😊🙏🏼

@AVSGARAGE

3 жыл бұрын

@@MototechWanderer how many sheets did you use? And the total expenses?

@MototechWanderer

3 жыл бұрын

@@AVSGARAGE I have discussed it in the video. For your convenience I used 10 sheets and costed 7.5K.

@AVSGARAGE

3 жыл бұрын

@@MototechWandereryes sir i have seen in the video but i was just curious that 10 sheets were enough for covering the whole car?

@MototechWanderer

3 жыл бұрын

Enough for the car, but did not cover the doors as I have plans for rear speaker while front door already has sound deadening already done.

Too good yaar❤

@MototechWanderer

3 жыл бұрын

Thank you 😊❤️🙏🏼

WagonR 2009 ke Bonet ke liye equivalent konsi car ki damping sheet rahegi...???

@MototechWanderer

Жыл бұрын

Swift waali hi best hai WagonR ke liye.

@VyasNisarg

Жыл бұрын

@@MototechWanderer OK, i will try it later thanks

Can you please share the noise levels in db using a meter or a mobile app with and without dampning at 70-100kmph for alto k10

@MototechWanderer

2 жыл бұрын

Unfortunately I don't have access to an Alto K10.

🔥

@MototechWanderer

5 ай бұрын

Thank you 😊🙏🏼

I never thought of dampening the trunk and the fender, by the way did you shoot this video before you installed hid bulb in your car?

@MototechWanderer

3 жыл бұрын

Yes trunk and fenders are always ignored. Yes, did this before the HID installation.

You might have done Door dampening as well it could have been completely silent drive.

@MototechWanderer

2 жыл бұрын

I skipped the rear doors as I have plans to install speakers. With the rear speakers I will dampen the rear door and front door is already dampened.

Hello, what a good job I have the same height and I just want to do that work on the insulation, how many plates of material did you use in the complete car? greetings from Chile

@MototechWanderer

Жыл бұрын

Cheers from India ❤️ 🇮🇳 ... I had bought 10 sheets which was shown in this video. In order to cover the doors and the roof, I would say about 15-20 sheets would be needed. Make sure to not put too much material as it makes the car heavy and there can be slight loss in power and fuel efficiency 😊

@AndresGonzalezOyarce

Жыл бұрын

@@MototechWanderer excellent I want to put the roof in the trunk and the doors mainly I don't know if it will be difficult to remove but thanks to your video I have a guide to remove certain pieces that I was afraid to break 👍🏼👍🏼 thank you very much

@MototechWanderer

Жыл бұрын

@@AndresGonzalezOyarce wish you luck with the process. 😊👍🏼

GREAT WORK SIR OTHER THAN AMAZON PLS TELL ME WHERE CAN I BUY DAMPENING SHEETS AND ROLLER DIRECTLY FROM THE SHOP I STAY IN HYDERABAD.

@MototechWanderer

2 жыл бұрын

Thank you! Try out the car decor shops in SP Road & MG Road.

Sir,ese lgane k baad,gaadi mai weight kitna badh gya hoga,milage bi kam hui hogi

@MototechWanderer

Ай бұрын

@@starkashishvlogs8905 10-15kg ka sheet laga hai car me. Sheet ka pata nahi par tyres upgrade ke baad 1-2 kmpl drop hua hai.

Bro I have alto k10 the dashboard and pillar makes much noise when the road is little stiff what to doo Please help me out

@MototechWanderer

2 жыл бұрын

Dampen them and I check for broken pins inside the plastics.

@minutpal3025

2 жыл бұрын

@@MototechWanderer thnx bhai

Do make videos regarding performance filter and straight pipe exhaust for performance gains

@MototechWanderer

2 жыл бұрын

Let's see if I go for them as I use the car for commuting and touring.

@MototechWanderer

2 жыл бұрын

Let's see if I go for them as I use the car for commuting and touring.

How much improvement in cabin noise after this? Was it worth the money spent?

@MototechWanderer

Жыл бұрын

15-20% improvement.

how is the sony head unit sound output via bluetooth?

@MototechWanderer

2 жыл бұрын

It's very nice indeed.

Old alto model main , puri car ko dumping karvaunga to kitna kharcha hoga ???

@MototechWanderer

Жыл бұрын

6-10k ke andar ho jana chahiye agar best quality sheets use Kiya jaaye toh

how much it will cost for bonet, boot , its door and all other 4 doors?

@MototechWanderer

2 жыл бұрын

Around 8k INR.

You left doors?

@MototechWanderer

2 жыл бұрын

Front door was already done before during speaker installation ... Videos are available on my channel.

It is a underpowered car, don't you get irritated at the time of overtaking into the highway, and what about its build quality

@MototechWanderer

2 жыл бұрын

I don't find it underpowered and I have tricks to overtake super quick. Build quality is standard, nothing breaks or fails. The only downside is it's not a safe car interms of crash safety.

Price??

@MototechWanderer

Жыл бұрын

7500 INR

sound decrease but weight increase...

@MototechWanderer

Жыл бұрын

Yes that's a problem.

Price kitni hogi ??

@MototechWanderer

Жыл бұрын

Mujhe 7.5k pada tha.