#DIY
Автокөліктер мен көлік құралдары
This video shows the detailed process of installing the SW-Motech crashbar onto my Suzuki VStrom 650 XT. It's a relatively simple and straight forward process where the crashbars are mounted onto the chassis by using 4 bolts and spacers on each side. All the required waschers, bolts and spacers are provided by SW-Motech and also comes with a installation guide. I had to use some WD40 on the threads while torquing in the new bolts as the threads were quite locked up by the old thread lockers and applying too much pressure can sometimes break bolts.
MY TOOLS (Best & Cheapest) :
Best Heat Gun : amzn.to/3e4OvS7
Budget Heat Gun : amzn.to/2ZGAQLR
Powerful Air Blower : amzn.to/2MwNWFh
Cheap Air Blower : amzn.to/30g92jo
Electric Screw Driver : amzn.to/2BPAUh6
Ring Spanner Set : amzn.to/2U4Ug8Y
Spanner Set : amzn.to/2T1lIIa
Ellen Key Set : amzn.to/2EvPbBn
Surgical Gloves : amzn.to/2SqlYeW
Nylon Mallet : amzn.to/2oKtrN9
Bent Nose Circlip Plier : amzn.to/397PHkU
Steel Screw Extractor : amzn.to/2J0JRHz
Tool Box : amzn.to/2U3cA4K
BIKE ESSENTIALS :
Wind Deflector for Suzuki Vstrom : amzn.to/3f813bF
High Temp Primer : amzn.to/3bb17WE
High Temp Paint : Out of stock
Best Engine Oil : amzn.to/3eQQolS
Best Engine Oil : amzn.to/2Bw0Ocj
Good Engine Oil for FZ : amzn.to/30dAZYU
Budget best Engine Oil for FZ : amzn.to/3cEd7Ai
Cheap & Best Bike Headlamp LED : amzn.to/2WsQeur
Car / Bike Portable Inverter : amzn.to/32HOBwF
Phone Charger : amzn.to/2EKnEhZ
Phone / GPS Holder : amzn.to/33H1aZZ
Trumpet Horn : amzn.to/3kh3FHV
Hazard Light Switch : amzn.to/39Gzxks
CAR ESSENTIALS :
Jumper Cable : amzn.to/305qAyl
Car / Bike Portable Inverter : amzn.to/32HOBwF
High Beam Fog Lamps : amzn.to/33ujllt
Low Beam Fog Lamps : amzn.to/2EUIc7F
Phone Charger : amzn.to/31jvVkQ
Trumpet Horn : amzn.to/3kh3FHV
Follow Me On :
Facebook : / mototechwanderer
Instagram : / mototechwanderer
Blog : mototechwanderer.blogspot.com/
Пікірлер: 38
Thank from France ;)
@MototechWanderer
Жыл бұрын
You're welcome
i add rubber washers in all the crash bars that i have installed. they do wonders in the dampening of vibration
@MototechWanderer
7 ай бұрын
Good idea 😊👍🏼.. will try
Excellent vid! Thank you!
@MototechWanderer
Жыл бұрын
Glad you liked it 😊
Great!!
@MototechWanderer
4 жыл бұрын
Thank you.
That deadlift 💪 For the tech stuff you do, I expected you to already have a cordless impact kit by now. Then those bolts will go in without WD.
@MototechWanderer
4 жыл бұрын
I need a more powerful impact kit. The present one just makes 10 Nm ... And these bolts were torqued super hard. 😅😅
@flippy66
11 ай бұрын
Lol that wasn't a deadlift, it was actually a really bad way to lift a bike, totally with his back instead of his knees.
Great thx
@MototechWanderer
2 жыл бұрын
😊👍🏼
Mate, you got like from me. Cool video, just small advice - next time when you screw-unscrew bolts please put speed 3x to 5x, it's a bit boring to look whole process how you screw or unscrew bolts :) Regards, Dimi.
@MototechWanderer
Жыл бұрын
Thank you so much 👍🏼 ... I will keep those inputs in mind while editing videos in the future 😊👍🏼
How much NM do the 8 engine mounting brackets do according to Suzuki? SW Motech advises 23 NM.
@MototechWanderer
3 жыл бұрын
Don't have the service manual, so cannot confirm the torque values.
@MegaHorse7
3 жыл бұрын
So how much torque did you use?
@MototechWanderer
3 жыл бұрын
Did not use a torque wrench, so cannot specify a value.
@NoOne-qx4xv
3 жыл бұрын
@@MegaHorse7 23
@flippy66
11 ай бұрын
The Suzuki manual states 25 ft lbs, which is incorrect, the correct figure is 16.5 ft lbs (which is about 23nm, so SW are correct)
Do make a video when you thread lock the bolts
@MototechWanderer
4 жыл бұрын
I will 😊👍
@elliotsayes8446
3 жыл бұрын
@@MototechWanderer Liar
@MototechWanderer
3 жыл бұрын
@@elliotsayes8446 ??
@elliotsayes8446
3 жыл бұрын
@@MototechWanderer where is the video where you thread lock the bolts?
@MototechWanderer
3 жыл бұрын
Do you think I am answerable to you ? My wish when and what I post.
Now you have added moustache to your ADV ... :v
@MototechWanderer
4 жыл бұрын
Haha 😁✌️
the bike is looking so damm sexy
@MototechWanderer
4 жыл бұрын
Thank you. ♥️
You need a good socket set those tools not Wright for the job.
@MototechWanderer
3 жыл бұрын
I agree. Will buy one.👍
Bruda, dont lift your bike up like this. Gonna break your back. Look youtube videos and save your body.
@MototechWanderer
4 жыл бұрын
Yeah ... Will try the back to seat method next time. 😊✌️