I was looking for a Canadian place to order my parts!!! So glad you're an option!

Built a 12kw clone this last summer, wish I had your video at the time. Couldn't figure out a good setup for fenders until I saw your setup - pretty simple and effective. Either way I'm on 1300 miles and LOVING this bike. Appreciate the time you took to put this out, keep it up!

@ElectricBikeLaboratory

4 ай бұрын

Thank you!! 12KW must be great fun 😊👌👍

@belasribadreddine

Ай бұрын

What's the meaning of clone??

Nice! I'm liking everything you guys are putting out for content

@ElectricBikeLaboratory

5 ай бұрын

Well thank you very much ! Let us know what you'd like to see ! :)

This is amazing. I love the work you guys do and I love that you guys put in the extra effort for the customer your all amazing

@ElectricBikeLaboratory

26 күн бұрын

Thank you very much!!

Great Video! Thanks for being Open Source. When lining up the side panels I have use two long studs or bolts with the heads removed threaded in the frame, the side panel hangs on the long studs till the rest of the bolts are threaded in. Great Magnet ideal.

Amazing content, as always!

@ElectricBikeLaboratory

5 ай бұрын

Thank you!!! :)

Wow, that's a kickass looking bike!

@ElectricBikeLaboratory

5 ай бұрын

Thank you very much ! 😁

great video bro👍

@ElectricBikeLaboratory

3 ай бұрын

Thank you!! 😁😁

Thank you.❤

@ElectricBikeLaboratory

5 ай бұрын

You're welcome! Hope it helps! :)

Great stuff :)

@ElectricBikeLaboratory

4 ай бұрын

Thank you!! :)

do you think the breaks/suspension could safely handle about 300lbs?

can you change the size of the free wheel like people with surrons do to there sprocket for mid mount motors? will it do the same thing and change the top speed or acceleration depending on which way you wanna go?

@ElectricBikeLaboratory

3 ай бұрын

For mid motors yes , this one is a hub motor so it wouldn't apply , but I have seen it done on mids

Step 10. It's very important to apply some lock tight on the screws. I use stronger than the blue one. When a screw pop out after hard breaking it damage or severe the motor cable. It happened to me 3 times on 2 of my bikes.

@ElectricBikeLaboratory

4 ай бұрын

Wow that's an excellent point !! Thank you very much for noting it :)

@alexchavosaurus9041

3 ай бұрын

I experienced the same thing. Went through three motors already.

@VideoLeakPolice

3 ай бұрын

@@alexchavosaurus9041 It's repearable. You can replaced the cable. I never did it myself but I saw videos and it's not too dificult. I mean for me since I openned up a lot of motors and did other repears like replacing halls sensors.

@alexchavosaurus9041

3 ай бұрын

@@VideoLeakPolice I have one opened up stripped down to the motor itself. and another waiting to get stripped down.. Living without a garage/ proper workspace has its ups and downs also :D

@VideoLeakPolice

3 ай бұрын

@@alexchavosaurus9041 I understand.

I'm very new into this and, I'm used to hooking up car stereos and amplifiers but I was wondering, to extend the battery life could you put a battery capacitor like in the battery compartment just right in front of the battery and hook it up in a parallel sorry. Or is it just not compatible like that.

@ElectricBikeLaboratory

4 ай бұрын

Generally not done with ebike batteries , usually to extend life you under charge the batteries

@TazWardx

4 ай бұрын

@@ElectricBikeLaboratory ok thanks

Hello! ive had a problem wih mine where the light, horn, and urning signals dont work do you know what i can do to fix this issue?

@ElectricBikeLaboratory

5 ай бұрын

I'm guessing it's not one of our kits , lights can be a pain which is why we opted for this plug and play system . Sounds like either the power feed or ground feed running to your switch has a broken wire and some kind of break in the line. Check those first !

the kits say that tires aren't included, what size is the rim for both rear and front? do you use motorcycle tires? seems like a fun little project to make something to ride into work on.

@ElectricBikeLaboratory

5 ай бұрын

Yes we have both 26" bike tires and 18" / 21" motorcycle wheels, this build is using motorcycle wheels and dual sport Shinkko SR241 tires :)

@18jonathan91

5 ай бұрын

​@ElectricBikeLaboratory thanks for the reply. I'll have to see about ordering one of these kits. Built my own fat tire ebike, so it should be even easier the second time. Do the kits include the diy spacers you made? I don't have a 3d printer, so coming up with solutions on the fly aren't as easy for me. And thanks again for the video, I'll be referring to it in the future I'm sure.

@ElectricBikeLaboratory

4 ай бұрын

Thank you! And yes the spacers are included with these kits

hi whats on my mind is a bike that i can take to work, detach battery for charing in an apartment, and breaks/suspension that can hold about 300lbs (id like to be able to take myself 150 and my partner 120 on short trips (3mi round trip), is there a bike that can do this? been looking at the radrunner 3 for this

@ElectricBikeLaboratory

3 ай бұрын

I think the Radrunner might be a great option for you!

What is the headset kit used in this video. Anyone have a link for it?

Awesome video. Where can you get the front fender wedge screw?

@ElectricBikeLaboratory

3 ай бұрын

Thank you! I've been looking for these wedge screws on the internet for the last 20 minutes with no luck , we pulled them off of another set of bike fenders. I'll keep looking and message here when I find them 😊

@ElectricBikeLaboratory

2 ай бұрын

Fender Wedge 3D Print File www.thingiverse.com/thing:6541777

Nice build. Didn't seem to have many threads on that rear axle nut?

@ElectricBikeLaboratory

4 ай бұрын

Just enough for the nut to fully thread on basically , but yes it's basically just enough. There are other model (more expensive) motors like QS273 or a more rare QS205 that have a longer axle length that allow for the nut + a lock nut to fully seat. A very good observation on your end ! Thank you for pointing it out 😊👌

Hello. Would you be willing share the 3d file for the controller mount? I checked your site and the mount is not available for purchase

@ElectricBikeLaboratory

3 ай бұрын

Yes email me at affordableebikes@gmail.com and I'll send it to you

Hello dear friends it looks like real mountains bike 😅😊

Nice bild buddy, what a good video !! 72v 60ah right ? What about full trottle range vs pedal assist range ?

@ElectricBikeLaboratory

Ай бұрын

Around 100km on throttle and never tested pedal assist alone :P I would think something like 200-300km though depending on how fast you're going, usually PAS is at lower speeds

@sl4930

Ай бұрын

@@ElectricBikeLaboratory realy awsome ! its a good deal, what about your geography location ? its like.. flat geography or many hills in the city like around area ? Thanks a lot buddy and have a nice week !

Nice video, tiny things like putting lock washers or regular washers on bolts. Getting proper size quality bolts also kinda must do, the chinese ones can snap, wear threads out or come loose. Maybe those could be made as a kit for upgraded bolts and nuts

@ElectricBikeLaboratory

5 ай бұрын

Very true. We're selling a few kits right now and throwing in all of the proper sized bolts, doing the first one kind of sucked lol having to find out what size bolt was needed. I appreciate the comment! Yes there are definitely improvements that can be made to the way we assembled it. Lock washers / regular washers is a great start for us 👌

@happygiraffe9787

5 ай бұрын

@@ElectricBikeLaboratory Thats nice to hear!

Hey brother looking at mounting the front fender but can’t seem to find anything like that wedge hole with the wing nut, any chance you know where I could get it? Or did you just fabricate it?

@NotFuelEfficient

2 ай бұрын

Bolt*

@ElectricBikeLaboratory

2 ай бұрын

That is the question we seem to be getting they actually came with our other fenders and we just stole them off there, but a 3D Printed variant is on the to-do list for us!

@ElectricBikeLaboratory

2 ай бұрын

Fender Wedge 3D Print File www.thingiverse.com/thing:6541777

Nice bike bro. I just got the 8000W motor. It's cool ,but how is the 12 one?!??

@ElectricBikeLaboratory

Ай бұрын

8000W motor usually is the QS273 which is a BEAST of a motor. Hubsinks and statorade can run it to 20KW. These ones are an MXUS 3K Turbo motor, good for 3KW-5KW and up to 8-10KW with statorade and hub sinks. Hope you're enjoying your bike! Must be fast!!

Dear friend! What is the name of the music that plays in your video?

You forgot to send me a free kit. Looks fun.

@ElectricBikeLaboratory

5 ай бұрын

Lol whoops! Thank you! Lots of fun :)

Will there be a qs273 option later on?

@ElectricBikeLaboratory

26 күн бұрын

Deciding between QS205 + ferrofluid / heatsinks of QS273. Really hate the weight of the 273, the bikes are heavy enough. The 205s can do 10KW which is plenty but the 273s are pretty bulletproof even without mods, tough call!

*Very nice video* for the seat it will cut circulation off to your balls, I modified mine, get longer bolts and put washers in between top 2 bolts to change angle of seat 1” usually and perfect, also you can put a enduro seat with some simple modifications if you need your balls lol but seriously it’s a great modification! The motor cable he spoke of is probably most over looked so great job, if that cable rubs on the rotor you’ll be buying a new rear hub motor! Bakes you may need to adjust few times or bleed air out, I bought a ebike hydraulic brake bleed kit! Great item to have. I got slightly over 5k miles on my bike in 1 yr so Im trying to help here I think this is a great video just to be clear. I would not use all that caulk it’s going to be extremely difficult to remove and you’ll actually get moisture if you leave bike inside air conditioned home then go ride in summer my experience and vise-versa from heat to cold, I never ride in rain and my bike is fine no caulk my sabvoton control is actually under the seat they sell a mount box that bolts underneath just fine, if you want keep battery from getting wet just don’t ride in rain or use very thin rubber gasket self adhesive 1/4” wide or trim smaller is ok. Again just trying to help guys! FYI riding on roadway cars will 100% pullout on you etc so be extremely vigilant and put set mirrors on it! Definitely mandatory if you want to live, I had a truck hit me a few days ago he didn’t have his blinker on was going straight thru intersection then abruptly turned right into me “while riding the shoulder of road” going 15 mph, I was watching and saw him start to turn so I was ok but you gotta pay attention 1000% and just a tip I use brush guards on all my bikes to protect my hands ( gloves of course) when this truck turned into me he hit my handlebars first and they kept me from losing control etc so something to consider, as a note I’ve rode motorcycle 45yrs so but what matters is really paying attention do not assume anything, last month a elderly lady ran a intersection jumped curb knocked down street signs and almost ran me over but I saw her, what I’m saying is pay attention guys don’t think it could never happen, if you ride long enough you’ll understand what I’m saying, and if you have kids don’t let them ever ride along a highway, again if you ride long enough you’ll see why I’m saying this, people just don’t pay attention they’re distracted on cell phones most of the time, one more thing but a set of led rechargeable blinking light, red rear/white front, be safe out there people.

@ElectricBikeLaboratory

5 ай бұрын

Amazing value packed comment!! Thank you so much you are definitely right ! Love the tip on the seat adjustment we've noticed it is angled pretty high and that is definitely an easier mod than what we had in mind 😀👍👍👍

Saludos Bro! Tu cuanto mides y cuanto mide toda la bicicleta ?

@ElectricBikeLaboratory

4 ай бұрын

¡Hola! Mido 5 pies y 11 pulgadas y la bicicleta me queda bien, creo que la altura del asiento es de aproximadamente 33 pulgadas (84 cm) más o menos. ¡Espero que esto ayude!

hello do you have "certificat of conformity " type approval 168/2013 CE

@ElectricBikeLaboratory

2 ай бұрын

We do not unfortunatley

I wish they were still available on the site :(

does it come with all the bolts and hardware like the spacers and washers ?

@ElectricBikeLaboratory

4 ай бұрын

Hi there, yes it does !

@collisonmarks6316

4 ай бұрын

when will the kit be back in stock ?@@ElectricBikeLaboratory

@ElectricBikeLaboratory

4 ай бұрын

Most likely in Spring , I believe you are on our waiting list so stay tuned! We will likely have a couple that we can put together before spring as well!

Hey Bro! Será que se le puede adaptar otra silla para llevar pasajeros?

@ElectricBikeLaboratory

4 ай бұрын

Yes, absolutely

@mg-dad

4 ай бұрын

@@ElectricBikeLaboratory Bro estoy enamorado de ella 😍👍 Soy de cucuta N.S / Colombia. sabes de alguna forma por la cual la pueda tener. Gracias por tu respuesta 😃👍

@ElectricBikeLaboratory

4 ай бұрын

¡Muchas gracias! Si pudiéramos enviarle lo haríamos, pero está un poco lejos 😂 Su mejor opción es obtener el marco y comenzar desde allí, ¡debería poder comprar un marco en Aliexpress / Alibaba por un precio razonable! A partir de ahí puedes reconstruirlo 👌👌🤙🤙

How fast does it go looking at getting one from the link.

@ElectricBikeLaboratory

4 ай бұрын

The display limits to 72 km/hr but if you enter a smaller wheel size to "trick" the computer it will spin up to about 100km/hr or 60mph

Where can I get the file for the controller mount bracket?

@ElectricBikeLaboratory

2 ай бұрын

Email us at affordableebikes@gmail.com

nice bike how much just for the frame? if possible

@ElectricBikeLaboratory

4 ай бұрын

Yes we have the frames available on our site !

Very interesting video! But if possible I would recommend to install the motor so that the wire is facing down. Then the water will not go to the motor so easily.

@ElectricBikeLaboratory

4 ай бұрын

Yes you are indeed correct , in this case the motor cable is actually not quite long enough for these MXUS 3K Turbo motors. The proper place is to go below and we did try that first but then we couldn't connect to the controller inside. It is an excellent point and I thank you for addressing it ! :)

What's the name of this rear fender?

@ElectricBikeLaboratory

3 ай бұрын

I am not sure honestly 😅 it was an add on when we bought the frames for these bikes

Is the chain and pedals necessary?

@ElectricBikeLaboratory

4 ай бұрын

Not totally necessary, there are many people who replace them with pegs

If i get one of these im putting on street tires and clip on handlebars and have an insane supermoto.

@ElectricBikeLaboratory

4 ай бұрын

They make an amazing supermoto bike !

is there a peddle delete version available?

@ElectricBikeLaboratory

Сағат бұрын

There are frames available without pedals , just pegs

yo how much for u to build one and send it tk me I would die for ine

@ElectricBikeLaboratory

Ай бұрын

Send us an email ! We currently have a wait affordableebikes@gmail.com

Where do you get those screws

@ElectricBikeLaboratory

3 ай бұрын

Which ones ?

@jospivey777

3 ай бұрын

The wedge one for front fender

@ElectricBikeLaboratory

2 ай бұрын

Fender Wedge 3D Print File www.thingiverse.com/thing:6541777@@jospivey777

I'm sorry but why do you encapsulate the controller in epoxy? Wouldn't this make any potential future repairs impossible?

@ElectricBikeLaboratory

3 ай бұрын

These controllers were prone to burning out for us. We burned out multiple controllers before we started thermal epoxying them. Haven't burned any out since 🤔 I believe the main issue is heat transfer away from the FETs which the epoxy is meant to significantly increase

good afternoon. I watched your video. you buy an electric bicycle. I really want you to put together in this video. how much is the price col for such a thing? . but I need a nominal 8000 watt or even 12000 watt ☝👍

@ElectricBikeLaboratory

4 ай бұрын

Where abouts are you located ?

@ivans940

4 ай бұрын

@@ElectricBikeLaboratory welcome I just read your reply. I am in Europe, country Latvia👍

@ElectricBikeLaboratory

4 ай бұрын

QS273 will likely be the motor you use , and probably Sabvoton 75150 or 75200 controller. It may be best just to buy a built bike from Alibaba for Latvia

@ivans940

4 ай бұрын

@@ElectricBikeLaboratory Meklēšanas rezultāti Tulkojuma rezultāts Latviešu Angļu Vai domājāt: Paldies kad atbildejat. man obligati vajag 12kw elektrovelosipedu. varbut jus ziniet alibaba vares nosutit uz latviju elektrovelosipedu ja es pasutišu alibaba? Thank you when you answer. I absolutely need a 12kw electric bicycle. maybe you know if alibaba can send an electric bicycle to Latvia if I order from alibaba?

@ivans940

4 ай бұрын

@@ElectricBikeLaboratory Thank you when you answer. I absolutely need a 12kw electric bicycle. maybe you know if alibaba can send an electric bicycle to Latvia if I order from alibaba?

i really want one of these, there so expensive lol

@ElectricBikeLaboratory

4 ай бұрын

The nice thing about them is they can be bought in pieces as you have the funds , all at once can feel pretty expensive, most of the cost is in the battery

When you placed the front fender on what is the exact name of that wedge bolt you used I'm trying to search for it Please and thank you 🤘🏾 killer build can't wait for mine to come in the mail

@ElectricBikeLaboratory

3 ай бұрын

Someone else has asked that question and I looked all over the internet for that bolt type but can't find it. I will report back when I do !

@ElectricBikeLaboratory

2 ай бұрын

Fender Wedge 3D Print File www.thingiverse.com/thing:6541777

The frame joints don’t look like they will hold very well. I’ve purchased a 60v scooter off of alibaba for $1600 and the frame failed due to metal fatigue. I absolutely see this happening to this stealth bomber clone.

@ElectricBikeLaboratory

5 ай бұрын

So far we've built about 20 of these and none of them have failed at the frame. They're possibly overbuilt (very heavy). But in any case it is a good thing to watch out for!

hi i saw in ali express they sell a complete set of this is it legit tho?

@ElectricBikeLaboratory

26 күн бұрын

No idea

How longs your waiting list? Lol

Uses" Chinesium bolts". Uses a spacer on the brakes. Doesn't use longer bolts to secure the brakes disc. Locktite is no substitute for thread engagement. FAFO

@ElectricBikeLaboratory

3 ай бұрын

Hey thanks for the comment! We switched to longer bolts for the brake discs, and the spacers for the rotors are aluminum. Great catch though on your part 😉

Just buy a talaria xxx it’s like 500 bucks cheaper and faster

@ElectricBikeLaboratory

5 ай бұрын

Just looked it up and Talaria XXX is $4000CAD and only includes 60V 25AH Battery, 47 mph top speed The one in this video is currently $3500CAD and has 72V 55AH Battery, which is more than 2.5X the amount of battery, and can do up to 50mph. Talaria XXX is a sweet bike, but facts are facts. More expensive and same speed if not slightly slower, and a battery that is 2.5x smaller. Maybe you can clarify if I have something wrong here?

@demonxuka4732

5 ай бұрын

@@ElectricBikeLaboratory where I live it’s $3000 usd so better bang for buck where I live

@scotja12

5 ай бұрын

Are you stunned? Do the CAD to USD conversion and look at the speed conversion as well that's DOUBLE the battery. I can't stand that Americans don't know math...

@ElectricBikeLaboratory

5 ай бұрын

The Canadians are getting destroyed with the currency , Americans don't realize how low Canadian dollar is compared to theirs 😭😭

stealth bomber showed up at my local track I own a mx4,xxx, and pro ss when I gave it a try it was shit sorry I'd rather ride xxx over stealth bomber anyday anyone that rides dirt bikes will feel the same sorry.

@ElectricBikeLaboratory

5 ай бұрын

Couldn't agree with you more. I have 2 Surrons and a Talaria MX3 , we've never brought a Stealth Bomber to an MX track, it's not made for it at all. It's made to ride the roads and occasional light trails in complete silence (hence stealth) , anything with a heavy hub motor is not an off road machine.

@darrylphillips6301

4 ай бұрын

The 2 are totally different like what bro😂😂 ones for dirt tracks ones for pavement commuting. Here in Chicago I'd take the bomber all damn day over xxx.

wait there isnt a nut or bolt holding the fork into the neck?

@ElectricBikeLaboratory

Сағат бұрын

Star nut at the top

do you ship to europe?

@ElectricBikeLaboratory

26 күн бұрын

Small parts, yes