DIY speakers Visaton BG 20 full-range speaker no tweeter dome + tweeter SC 10 N

Тәжірибелік нұсқаулар және стиль

DIY speakers Visaton BG 20 full-range speaker no tweeter dome + tweeter SC 10 N / making a crossover for acoustics
Hello friends.
in this video I will make a notch filter for a full-range speaker BG 20.
I removed the tweeter dome from this speaker.
now you see the frequency response of the full-range speaker BG 20 with tweeter dome and without tweeter dome .
I will select a notch filter empirically to remove this hump in the frequency response of the speaker.
and I will also add a tweeter Visaton SC 10 N to the speaker.
we will all see and try to hear the difference in sound.
housing for acoustics made according to the drawing of visaton solo100.
let's see together how I selected the notch filter.
First, let's look at the frequency response of the speaker without a filter.
I have a filter for B 200 High-end full-range loudspeaker from SOLO 100, let's try to connect it and see how the frequency response changes.
new filter from the components that I have.
I will use a filter from Visaton solo 100 as the basis for the circuit.
diy 2 way speakers
Friends if you want to support my channel www.paypal.me/MihailMischenko/
thank you very much

Пікірлер: 29

  • @goodsound202
    @goodsound2022 жыл бұрын

    Friends if you want to support my channel www.paypal.me/MihailMischenko/ thank you very much

  • @Claudio9494
    @Claudio94945 күн бұрын

    Amazing video! I was thinking of building a full range voigt pipe style speaker with the bg20 but now I am going to build it with your crossover.

  • @mariancol2428
    @mariancol24282 жыл бұрын

    Excellent comparison, I'm watching your channel and I can't believe how simple and clear you can show how the sound changes to different components! I'm waiting for other demonstrations, thank you!

  • @goodsound202

    @goodsound202

    2 жыл бұрын

    thanks. I do what is most interesting to watch. then there will be ready-made speakers, the materials bought must be collected.

  • @tenettttt
    @tenettttt6 ай бұрын

    Very helpful showing the adjustments in real time. Made me understand the properties of the components better.

  • @fabbri4497
    @fabbri449711 ай бұрын

    The treble is much cleaner with the SC10N. Good job. Maybe make the cutoff lower in frequency? 6000Hz?

  • @snoopyboobs
    @snoopyboobs9 ай бұрын

    did you cut the whizzer cone off?

  • @eelkoweeda6453
    @eelkoweeda64532 жыл бұрын

    Search for Deadalus-TL, for Visaton's B200.

  • @royd7984
    @royd79847 ай бұрын

    How to remove the tweeter domb without damaging the driver of the Visaton BG 20? Thanks!

  • @FF.ulltone.8inch
    @FF.ulltone.8inch9 ай бұрын

    Hello. You don't have measurements/box drawings of some boxes for the Visaton BG20 that you would like to post? I want to build myself a set with these elements, and with the SC10N at the top of the frequency scale around 8000Hz. But also with good tight bass at the bottom. So that I want a well-built box, well calculated for this speaker element. And perhaps you also want or can post a drawing and calculation of the crossover you tried on the same set. Just a friendly request

  • @OscarHernandez-ym4hx
    @OscarHernandez-ym4hx3 ай бұрын

    You made a two way crossover specifically for this setup?

  • @kevinchew2594
    @kevinchew259411 күн бұрын

    Halo , Friend ! I need some help can i ask now i have 2way speaker that is VISATON W170S 4ohm 6.5driver and VISATON SC10N Tweeter ? As i now an expert about matching crossover , just now i come across your demo video and i need your help to design my visaton w170s 6.5inch driver crossover ? thzx for your kind help ! tq tq

  • @Matrix...777
    @Matrix...7772 жыл бұрын

    😎❤️💛💚

  • @crtgamer2355
    @crtgamer23552 жыл бұрын

    I think this is one of the hardest things to get right, especially listening to white noise, because an even response doesn't necessarily mean good sound quality for music. It could leave the speaker sounding dull. I think tuning the speaker with your favorite genre of music will be best, otherwise you will need an EQ processor because no two songs are alike. Mastering and mixing is also very important. There is no one size fits all.

  • @goodsound202

    @goodsound202

    Жыл бұрын

    Of course everyone likes a different sound. I agree

  • @wellroundedsound2422

    @wellroundedsound2422

    Жыл бұрын

    Linear response is a base for a good sound. From there you can tweak it to your own preference via EQ. Cheers!

  • @alexzay9637
    @alexzay96372 жыл бұрын

    First)))

  • @fairenoughthenwhat
    @fairenoughthenwhat5 ай бұрын

    For a relatively cheap little speaker, it seems to play quite nicely- without the little dome, on your recordings, by itself. Adding the xover/ tweater makes it very average, to my ears.

  • @goodsound202
    @goodsound2022 жыл бұрын

    acoustic sound comparison 1 composition 5:08 2 composition 6:41 3 composition 9:26

  • @gergelymarcsik1679
    @gergelymarcsik1679 Жыл бұрын

    Hi, what software do you use for the measurements?

  • @goodsound202

    @goodsound202

    Жыл бұрын

    hello/ SMAART 7

  • @user-sk3uj7si7q
    @user-sk3uj7si7q Жыл бұрын

    2個聲音的感覺

  • @OscarHernandez-ym4hx
    @OscarHernandez-ym4hx3 ай бұрын

    Why more bass?

  • @user-sp3ux2wg9v
    @user-sp3ux2wg9v2 жыл бұрын

    Сильна ли разница с b 200?

  • @goodsound202

    @goodsound202

    2 жыл бұрын

    Не знаю, надо сравнить.

  • @user-sk3uj7si7q
    @user-sk3uj7si7q Жыл бұрын

    Bg20?

  • @DaBeppo

    @DaBeppo

    Жыл бұрын

    is cut.

  • @noyan2006
    @noyan20062 жыл бұрын

    B200 with no crossover is better

  • @goodsound202

    @goodsound202

    2 жыл бұрын

    B200 without a crossover plays very nasty. i will make a video later

Келесі