They make hinges that allow the door to open outside the edge of the cabinet; I *think*, for this exact purpose/reason: rollout shelves. My dad did the same thing to a pantry cabinet; grumbled up and down, did some research, found them and saved rebuilding mom’s pantry. Although for shop furniture your solution is much quicker and likely less money, just wanted you to know they exist.

@WalkersWoodworks

2 жыл бұрын

That is good to know! Thank you. Learn something everyday.

@NirvanaWoodWorksbyJanie

2 жыл бұрын

@Karen, do you happen to have a link or maybe name for these hinges? I recently did a kitchen island for us and I completely overlooked this. I caught the problem much later in the project and really shook me lol. I'd love to have an alternative solution besides a quick and dirty shim solution. Although it worked for me and it's for me and my family, if the opportunity arises to build one for a customer, I'd definitely consider this type of hinge. Thanks in advance

@rds333

9 ай бұрын

Blum Clip Top 155° Zero Protrusion Hinges, Nickel, Face Frame, 5/8"Overlay By Rockler. Although, you still need to place your pullouts above/below the hinges locations. But beware, $$$$$$. @@NirvanaWoodWorksbyJanie

Thank you for showing the real life of building shop furniture. I watch different videos and think I'm the only one that make these mistakes even after woodworking for so many years. So few actually show the mistakes and now I can feel normal again.

@WalkersWoodworks

2 жыл бұрын

Thank you for watching and taking the time to comment. Means alot. I used to try and give the mistakes but now if I make them I just show it and hope it helps someone lol.

I like watching shop projects the most. It always gives me something to think about while I'm in the shop working. I always see things that would make my space even cooler.

@WalkersWoodworks

2 жыл бұрын

They are my favorite to build for sure.

I love it, A real woodworker, that makes mistakes, shows it and fixes them. seems every other woodworker content creator is perfect and never makes mistakes. Bravo, Good job. Great idea for storage, Ill be starting mine soon. Thanks

@WalkersWoodworks

2 жыл бұрын

Thank you. I figured if someone else can benefit from my mistake I may as well show it lol.

It's so nice to see that even woodworkers on KZread make mistakes. I need a few sheets of plywood to get my garage/workshop organized

@WalkersWoodworks

2 жыл бұрын

Haha I make mistakes constantly.

@b3ardedbarbarian

2 жыл бұрын

@@WalkersWoodworks as do I lol

I like that kind of projects.

@WalkersWoodworks

2 жыл бұрын

Thanks!

Enjoyed the fact that you left in the video your goof ups. I related to some of them and recall the same thing happening here in my little work space, once or sixteen times.

@WalkersWoodworks

2 жыл бұрын

Haha as long as it's not 17!

I just bought some blades and was thinking of making a blade storage cabinet but this makes a lot more sense. I have a bunch of wood waiting for a project (some call them 'scraps'). Thanks for the ideas. Remember what happens in the shop (mistakes?) stays in the shop.

@WalkersWoodworks

2 жыл бұрын

Haha I like to let the world see my mistakes so hopefully they won't have to make them.

This was great and you are hilarious. I love your attiitude!

@WalkersWoodworks

2 жыл бұрын

Haha thanks! I appreciate that.

I knew exactly what the problem was just by your thumbnail lol 😂. I made a kitchen island, for ourselves, and once everything was installed, painted and ready to be assembled and in place…. disaster struck 😭. I was absolutely shook and just kept staring at it and wondering "how could I have missed this? How did I overlook this?" 😂. You definitely learn from your mistakes. I'm just glad it happened to me personally vs a client. Although I definitely maybe would've caught it before delivery/install day. My solution was the same idea you did. My drawers were much bigger and wider tho. So I had to completely break apart, literally break apart, the drawers. I even had a huge cabinet roll out one that I designed to put pots/pans in with a small upper level for the tops. It worked out at the end but my shims are much more visible as I installed hinge lights that turn on automatically when the doors are opened. They just clip on to the already installed euro door hinges. They're kinda bulky, hence why my shims are much more visible to allow for the big cabinet drawer NOT to catch/stop on them. Loved seeing you mess up, in a good way 🤣🤣, the same way we regular ppl do too. Thanks for sharing!

@WalkersWoodworks

2 жыл бұрын

Haha I'm just a regular guy! I like sharing mistakes. Hoping someone can learn from mine and not have to go through it. I'm lucky I was just using pull outs and not full blown drawers like you. That must have sucked. Glad you figure it out though!

Good stuff Bro

Oh wow. Didn't realize that you were also. I'm on the Central Coast - Salinas, near Monterey.

@WalkersWoodworks

2 жыл бұрын

Yea born and raised in Nor Cal haha.

I like it Good job 👍

@WalkersWoodworks

2 жыл бұрын

Thanks Donnie!

To drill at the angle, first drill a straight hole into the side of a 2-by, then run that through the table saw to cut the angle you want. Now you have a nice guide block.

@WalkersWoodworks

2 жыл бұрын

That's a good idea!

Brand new subscriber to your channel…I’ve been seriously binge watching as many videos as I can. Well done!!! I really appreciate you showing and talking about your mistakes. Can you provide info about your table saw and your working table? I have an older, poor quality table saw, and a much smaller shop, that is not quite setup like yours 😬😬😬. Thanks again for your videos. Loving them.

@WalkersWoodworks

2 жыл бұрын

So glad they are helping you! I have a 3hp 36" sawstop. You can see the work bench on my website. Walkersww.com under plans

This project looks good. The only thing I would do differently is putting a lipped edge on the pullouts, all the way around and at least 1 inch in height. (In your case, 1 inch height + 3/4 shelf = 1 3/4 total)' This way, stuff won't be falling off the shelf. At some point, you'll be adding more stuff to the cabinet and things will start to fall off. Has this happened to me? Absolutely!

Amazing ✊🏽 🙏🏼🖤

@WalkersWoodworks

2 жыл бұрын

Thank you!

I definitely need to build this. I rarely change my blades because the stuff is scattered all over. I'm constantly looking for my fingerboards and such. I also just happen to have 4 sheets of 3/4 sitting unused. 🙃

@WalkersWoodworks

2 жыл бұрын

Nice! You only need one for this one haha. Well and a 2x4 sheet of 1/4.

@CheveeDodd

2 жыл бұрын

@@WalkersWoodworks oh, I also happen to have 8 sets of those "euro" slides laying around because Amazon sent me a double order! 🙃

@WalkersWoodworks

2 жыл бұрын

There you go! Gotta love that.

Great video keep them coming like seeing how you are building up your shop hopefully get my own shop built behind my house and move out of my garage lol most likely not baby number 2 on the way kids aren’t cheap lol but love them anyways lol

@WalkersWoodworks

2 жыл бұрын

Appreciate you watching! Hey, you never know. I never thought I'd have a shop either.

had the same issue on mine. I ended up routing a channel on the inside of the door for the runners to have clearance.

@WalkersWoodworks

2 жыл бұрын

That works too.

Okay, I'm not commenting about the hinges or anything else. My comment is that a Triton track that you're using with that makita

As I was watching this vidya on the KZreads, I thought, a guy can sense a bit of VGG in here. Seems, like me, you've been watching a bunch of Derek lately. 😆 Perfect. 👍

@WalkersWoodworks

2 жыл бұрын

😂😂 he is definitely my favorite KZreadr. I had to bring some of it into my content. Plus that's just how I normally talk so lately I figured I may as well just act normal instead of trying to "act" people seem to relate better.

@WalkersWoodworks

2 жыл бұрын

If you watch the video before this I'm actually wearing a VGG hat and FSM hoodie.

@Matt_224

2 жыл бұрын

@@WalkersWoodworks 😆 I noticed the hat and hoodie last time. We clearly have similar taste in entertainment. I too am a fan of VGG and the entire MT crew.

@WalkersWoodworks

2 жыл бұрын

Haha right on! I've thought about starting a channel for my chevy luv build but I'm still not sure. If you're interested in that you can check it out on Instagram @ls1luvtruck

@Matt_224

2 жыл бұрын

@@WalkersWoodworks way ahead of you. 🤣 I've been following the luv build for a little while now. And I just saw you posted about the Nova. What are plans with it?

Enjoy shop projects here

@WalkersWoodworks

2 жыл бұрын

Awesome!

Nice but I think the saw blades are a bit exposed to damage. If you could secure them better I think it would be better. If they fall off the concrete floor could damage them.

@WalkersWoodworks

2 жыл бұрын

Yea. I'll be careful opening it

how did you not see the error in Skecthup?

@WalkersWoodworks

2 жыл бұрын

Cause I didn't attach the door I just made it to size.

What's the cost of that sheet of ply?

@rds333

9 ай бұрын

$$$$$$$ depending on what grade.

🗣️🗣️

or all you needed to do was change the hinges.... MUCH less work

@WalkersWoodworks

2 жыл бұрын

🤷‍♂️ what can I say, I like to try and fix stuff with what I have.

@joeychgo

2 жыл бұрын

@@WalkersWoodworks I get it - but you created more work when a $3 set of hinges would have solved the problem

@WalkersWoodworks

2 жыл бұрын

Thanks for letting me know. I was under the impression all full overlay hinges would put the door in this position. 🤷‍♂️ I'm not a cabinet guy haha.

@robertball3578

2 жыл бұрын

Let's see more shop projects. The price of wood has put fine furniture projects on hold for me.

@WalkersWoodworks

2 жыл бұрын

I have a few planned!