No video
DIY Side by Side windshield for less than $100
Learn how we made a custom DIY windshield for our cfmoto zforce side by side for less than $100!! off-road trail riding with more comfort. build and installation
wind shield straps #amzn.to/3fiO0tE
diy windshield #cfmoto
Пікірлер: 68
This is a great video, exactly what I was looking for. I had seen those straps but didn't know how they worked.
@CameronsonCamera
27 күн бұрын
Thank you. We are still using this today. The only thing we have done since then is added a section of rubber vacuum line to the bottom side to prevent scratches on the paint
You guys are awesome!! Thanks for a great video - I'm headed to Lowes!
Great idea. Now you can make a folding one next. At least I bet you could!
@CameronsonCamera
4 ай бұрын
We’re thinking about bed covers and upper doors also
Awesome job. I used your idea but when I marked out the windshield I traced the hood with a grinding disk on edge than a washer with a sharpie. But I never would have done it without this Video. Also I put Foam take between the bar and the Plexiglass to keep the vibration down .Thank you. Nova Scoita Canada
@CameronsonCamera
10 ай бұрын
I’ve used that trick with a washer on flooring before, definitely a good idea. I’m glad to hear it was helpful.
Thanks for sharing, this will save us a few hundred bucks.
I know what my spring project is going to be now. Thanks.
Thank you so much! Great video! 👍
Awesome video windshield turned out great we have built a bunch of windshields for our buggies over the years we need to build some for our current buggies
OMG I have the same sxs and spent like 5 bills. I will use this method for rear now though! Thanks for doing this video!
@CameronsonCamera
2 жыл бұрын
It’s working well for us. Thanks for watching!
Very good job:)Very helpful video!
@CameronsonCamera
3 жыл бұрын
Thanks
Thanks for the video!!!!
Perfect, i want make the same, Cheers from argentina, sorry for my english..
@CameronsonCamera
3 жыл бұрын
I hope it helps, thanks for watching
Using a flat washer works also to draw contour
This is a very good video, good job Cameron's!
@CameronsonCamera
3 жыл бұрын
Thank you!
"ready for adventure" ha nice video
That would last about 5mins with my rig. But good job for your needs
Where did you buy your contour gauge?
@CameronsonCamera
8 ай бұрын
Contour Gauge Duplicator - 20... www.amazon.com/dp/B07XSJ2SWL?ref=ppx_pop_mob_ap_share. This is the one we have
what thickness
@CameronsonCamera
8 ай бұрын
1/4 inch
We. Were lazy we got one for 200made for the machine works great
@CameronsonCamera
2 жыл бұрын
Nothing wrong with that, they’re a great investment
Helpful vid. I'll be building this. Just saved 250$. Questions: How do you get the windshield from sliding down and bottom edge from rubbing and scratching the paint? I'm thinking weather stripping at bottom edge, thoughts?
@CameronsonCamera
3 жыл бұрын
I ended up getting vacuum hose and cut a slit down it then slipped it around the bottom edge . I’m glad it was helpful!
@gina6083
2 жыл бұрын
Could use pool noodle and your choice of adhesive or put on a glue gun bead/strip on bottom to keep from touching. Just cheap ideas.
@phoenixarizona8441
2 жыл бұрын
Rubber Hose around the edge of the windshield works perfect
@jcmjrtile1261
Жыл бұрын
Try pipe insulation
@RocksNRuts4
Жыл бұрын
they sell rubber edging
🏆🏆🏆👍🙏🙏 SUBSCRIBED Thank you for sharing
Nice job. Where did you get those belt type mounts for the windshield?
@CameronsonCamera
Жыл бұрын
Thank you! We got ours from amazon, their should be a link in the description.
@petropete3122
Жыл бұрын
@@CameronsonCamera yes see it. Thanks again.
I just made doors for 35$ with straps and clamps with see through tarp
@CameronsonCamera
10 ай бұрын
Nice 👍
Hi! Great video! Where did you get the straps???
@CameronsonCamera
2 жыл бұрын
Thanks! We got the straps off of Amazon .
Hola donde venden el medidor de contornos saludos desde Chile
@rickliners6123
3 жыл бұрын
En Amazon.com.
@johnnywoodmusic
Жыл бұрын
En el pinche Harbor Frey
What size of sheet did you buy?
@CameronsonCamera
8 ай бұрын
2x4x1/4
@zforce800
8 ай бұрын
@@CameronsonCamera would you have a link for the windshield can't find a 2x4 sheet
@CameronsonCamera
8 ай бұрын
We got ours at Lowe’s a couple years ago.
@rockyvictory9044
7 ай бұрын
Same issue trying to find sheet
Under $100.00 after you buy a $200.00 tool
@CameronsonCamera
6 күн бұрын
I would say that if someone is looking into building something vs buying something , they most likely already have basic power tools. Dewalt tools are nice but there’s definitely cheaper options out there to get you started.
How well does it hold up. Thank you from Ohio
@CameronsonCamera
2 жыл бұрын
I can’t say that I’ve had any issues with it, if you’ve got more time than money it’s a good option. I haven’t had any flexing problems and scratches are minimal. I did take it off at the little Sahara sand dunes (if you saw that one) because it was so hot, I wanted more airflow. Thanks for watching!
@clintskidmore8394
2 жыл бұрын
@@CameronsonCamera thank you I definitely have more time than money! lol I ride in Ohio and West Virginia so I think it will work great.
@clintskidmore8394
2 жыл бұрын
@@CameronsonCamera what size thickness for the plexiglass do you know?
@CameronsonCamera
2 жыл бұрын
We got ours from Lowe’s. It is 2’ x 4’ lexan 1/4” thick
@clintskidmore8394
2 жыл бұрын
@@CameronsonCamera thank you so much
There were 3 other videos ahead of this one and none had any information of value to this topic this chick just slapped the ego right off those worthless posters.
@CameronsonCamera
7 ай бұрын
Thank you.
Plexi will crack and shatter and hurt you ! Should of used poly lexan smh and dont need those windshield buckles smh just some velcro straps. And where do you get your crack?
@CameronsonCamera
15 күн бұрын
I hope things get better for you dude
@billdempsey9704
14 күн бұрын
@@CameronsonCamera that wasnt an answer. Where do you get your crack?
Can you take this off?
@CameronsonCamera
2 жыл бұрын
Yes we remove and install as needed, the straps are Velcro
Awesome video but your voice tho 😅