building my own shed was one of the most satisfying things i've done so far. working with wood is great.

@mr.e3894

3 жыл бұрын

@@SwankeyMonkey although playing with it from time to time, is also rewarding in itself...

You know if I had that nice shop and setup you show I'd pull the delivery trailer inside and build the shed right smack on the trailer itself. Impressive crafts and skills.

@dickbyrne2309

Жыл бұрын

Good idea but it might be too tall for the shop doir

Good video. Really like when KZreadrs don't add music or constant commentary throughout their videos and just show how/what they're building stuff.

@DieterSchneider

2 жыл бұрын

Thnaks, I have music on other videos though

Fantastic build with “Great” craftsmanship.

I am really pleased how well this is working out for you. Congrats! Thank you also for sharing the build process videos. Very generous.

@DieterSchneider

4 жыл бұрын

Thanks

When you’re building a shed at 4 and you have a date at 5.

Loving this build series, on pins now waiting for the next video 👍👍👍

Perfect size wood shed. Wish we saw this a month ago!

@slabbyrider8665

4 жыл бұрын

I 'saw' what you did there.

Very good job..changed my life too...like it when people know their skill !! saw...🤣😂😂

Wish I could get lumber that nice!

This may be one of the best shed builds I've seen on here. U made it look simple and no help in no time. Excellent! 👏 I will subscribe looking forward to seeing more of ur work.

@DieterSchneider

2 жыл бұрын

Awesome, thank you!

Love the recessed cross braces.

@slabbyrider8665

4 жыл бұрын

Yea, not seen that on other builds. I'm looking at building a 16ft x 10ft and the videos I see don't put any bracing or noggins in at all. I've had visions of me putting up the sides and then watching the shed collapse to one side like a small scaffold tower with all the bracing in one direction lol (see a brickie do that then climb on and it collapsed 😆) certainly gives more confidence in its strength.

@shadie024

4 жыл бұрын

Something that small doesn’t really require to have cross braces but pretty neat that he inlayed them anyway.

@x.Prep.Tastic.Sophia.x

4 жыл бұрын

Lots of sheds side sheeted with PLY or OSB. That will perform side bracing for you.

@wolverinebear5357

3 жыл бұрын

Craftsmanship

@hineko_

3 жыл бұрын

@@dmh151076 depends where you live. When you are in a cold climate with a lot of rains you want your stuff to be more rigid because the soil under it is going to move each winter/spring.

excellent that. very informative. I'm going to start by building a smaller version to store garden tools, lawnmower in. thank you

Today I learned I’ll never have the skills to build this. Good work

good for you finding a market for these as they are surely better than the ridiculously expensive plastic garbage you get at the big box stores but I'd be interested to see your cost breakdown. I built our shed (8' wide x 6' deep x 7' tall) from cedar, including a framed base with plywood floor, double doors and a shingled roof for less than $600 Canadian. It's also framed with 2x4s and all screwed together. Of course I'm not counting my labour but you can hardly buy one of those pre-cut packs for that price.

Oddly satisfying! Thanks for posting.

that's probably the most perfect shed I have ever seen. great work!

@DieterSchneider

2 жыл бұрын

Thank you! Cheers!

I've watched 100's of DIY buildings videos and THIS one is most inspiring. The Size and Simplicity make this the most *versatile* and *practical* design that I've ever seen. Marketing wise there's no one that you can't sell this to.

@will260007

4 жыл бұрын

He does make it look easy indeed but definitely not a weekend project for a novice. Well not at the same craftsmanship

@janonthemtn

3 жыл бұрын

Someoneelse Who has all those special saws? Not me. I guess you could have box store or lumber yard cut but how much is it per cut? $1??

@LogHewer

Жыл бұрын

@@janonthemtn Harbor freight has them for a reasonable price. :) You don't really have to have them, anyway. A hand saw will do.

@Swearengen1980

Жыл бұрын

@@janonthemtn Special saws? I don't know a single man, unless they live in an apartment, that doesn't have a circular saw and a miter saw. They aren't special, they're the most basic of tools. You could easily do this with just a circular saw and those are cheap. Even a good miter saw for the average home owner / wood worker is less than $300. And if you're a home owner, that will more than pay for itself. Most people don't need a table saw; I don't even use mine, and you certainly don't need one for this build.

@janonthemtn

Жыл бұрын

@@Swearengen1980 Maybe I can try, I can measure...

Quality built that shed will outlast any store bought prefab shed nice work👍

Brilliant!, Strong work.

@DieterSchneider

4 жыл бұрын

Thank You

Man to thoss people knocking you for selling something so simple lol if it was so simple they wouldn't be paying you for it buddy. Looks great man

@fishmut

4 жыл бұрын

andy ruiz ..not every one builds things , that’s why people buy instead of haveing to make what it is they want, it’s easy to buy for many people.

@ThisTall

4 жыл бұрын

It’s only cheap to build these if you already own every tool you need. For anyone that doesn’t, it’s literally cheaper to buy it.

@jonjohn855

4 жыл бұрын

@@fishmut that's basically what he was saying

@jonjohn855

4 жыл бұрын

@@ThisTall well you can actually get a cheap circular saw, measuring tape, and drill with bits all for less than 200$. Everything else he has is just extra stuff that makes it easier, but not necessary

@enzprintco.8625

3 жыл бұрын

They are paying for the hours and hours upon hours he’s worked and increased his skill and knowledge. Same reason graphic designers are so dang expensive. Most people don’t have tools and know how to make what they want. I’m a maker, but there’s still things I’ll buy that I could have made, but sometimes you have to ask yourself...what’s your time worth?! :)

You mean customers love it and it is selling like hot cakes! That is great! Maybe they would also like a nice, simple, sturdy outdoor bench.

@DieterSchneider

4 жыл бұрын

Yes, it's been a good so far, I think people are tired of those low quality kit sheds. Funny thing is that I am going to deliver two outdoor benches with this as well :)

Pretty cool. At this height, I'm willing to bet you could speed up this build even further with the use of a few Gorilla work platforms in lieu of the ladder.

This is a cool product man! Good stuff this helps your business, in norway right? Here in NL mini structures are always good business, and personally they give me the most fun! Thanks!

@FM-ll3vo

2 жыл бұрын

Jj

I want to build a shed like that😍

Hi. I'd really like to know how you sealed the bits between the roof rafters in between the bird mouth cuts. You placed a board over the ends but nothing on the bottom of the overhang? I've built a tiny house before and have another project imminently. I wasn't happy with my tiny house solution to this problem and wondered what you do. Thanks for your help.

Great looking sturdy shed! I hope you sell a ton of them 👍👍👍

Nice thing about America is you can use your talents, skills and interests to do what you want. Everyone doesn't do the same thing. That's why we have a lot cool different things. We are free.

I got the idea now how will I build my own shed...Thanks

Look forward to purchasing the metric plan and cutting list if the OP makes them available. Not many nice metric shed plans online that I have come across!

@somebodyandthem

4 жыл бұрын

Den Beech u can convert

Lets just appreciate his experience 🙌🏼

This is excellent, simple, and looks relatively inexpensive. Considering such high demand and so many subscribers (and therefore potential competitors) it is very kind of you to share this.

@DieterSchneider

4 жыл бұрын

Thanks, Most of my viewers are in the US (I'm in Norway). There might some who will try to compete, but that's ok

@keithcooper2012

4 жыл бұрын

@@DieterSchneider thats a great outlook because not everything is a zero sum game. Great video!

@RedFoxFoxyFomo

4 жыл бұрын

Many may try... but at the end of the day. Workmanship stands the test of time. Some may make it cheaper; but will probably fall apart a lot sooner too. Nice to see craftsmen at work. Remember, if it looks too easy, it's normally because your watching skill.

Very beautiful project

Very nice work!

Thank you so much for this video. Simple and functional. Quite the helper you have.

@DieterSchneider

Жыл бұрын

Thanks for watching!

Hi Dieter, Thanks for your channel! May I ask how you will finish the roof? I mean you completed the top glance but rest of the root is just bare osb?

Awesome job, thank you for sharing.

Nice build, thanks.

This is oddly satisfying to watch.

Plain and simple if people are buying it then you are making something worth buying

Wow 😮 Amazing.

What a great video! Do you have a list of the materials/dimensions, please? Well done and here's to another brilliant and prosperous new year for you!

Keep it up my friend thanks for sharing 👍🏽 looks good

@DieterSchneider

2 жыл бұрын

Thank you, I will

Love watching your videos, great work! What centers do you use?

great skills! learned alot! Thank You

Great job! Thanks.

@DieterSchneider

4 жыл бұрын

Thanks for watching!

Hey Dieter do you have drawn plans for this? You should set up a way to sell the plans electronically. I’m sure there are a few guys and gals in the US that would buy the plans.

Perfect!

Great job !!!

Well done!

I learnt a lot from just this one video

@DieterSchneider

3 жыл бұрын

Glad you found it helpful. Thanks!

I am not a builder, Bruno can try to make one just like yours. Good job

Amazing! Good vibes from Brazil!

@DieterSchneider

2 жыл бұрын

Rock on!

Please make a video on your shop and tool set!

This looks fantastic! I’m curious how you transported it to it’s final destination?

Hi. Great build. What time of siding are you using

Good work, nice to look at. Greetings

I love what you do look really good I love love it thank you

what is the name of the clap board you put on the outside of the shed?

Inspirerende! Forslag til en video: takbelegg osv på bod!

Can you talk about costs and perhaps materials list please - PRETTY PLEASE😊

What did you use on the roof ? i saw the aluminium edging but whats in the middle ? TIA

Is that a first or second fix nailer you're using? Great vid by the way..... 😃

Interessante und großartige Arbeit. Bitte mach weiter so Vielen Dank = Interesting & Great Work. Kindly keep doing it more & more Thank you

@DieterSchneider

4 жыл бұрын

Thank you Sir!

Did I miss something. Were you going to put a metal roof on it?

@tonebaxter

3 жыл бұрын

Judging from the license plate this guy is in Poland or some other eastern European country

@skogsmats

3 жыл бұрын

Norway

@michaeldahm214

2 жыл бұрын

I had the same question. Rest of the build is great. A lot of thought gone into keeping it simple with minimal material yet structurally sound.

He literally has every tool in the shed.

@d.b.t.1696

3 жыл бұрын

Exactly what I was thinking. Now he has to save on construction methods.

Awsome build, but would have to argue that the best part was little man making his appearance.

question. the way you built your roof, isn't the water going under the metal sheet?

@aus71383

4 жыл бұрын

I presume the drip edge will later have a metal roof applied over it.

Nice shop.

When you put the second piece of shiplap cladding on and it didn't go full length, I thought "why didn't he use a full length? This will be terrible!" then when you offered up the cut piece and I saw that it was tongue and groove. We don't have that in the UK, at least, i've never seen it. It seems to be much more efficient than our flat ends. I'll investigate the idea of routing a tongue and groove maybe in future although suspect it would only work well with thicker cladding boards.

@DieterSchneider

3 жыл бұрын

It works very well. These boards are only 19mm. It's probably the most popular cladding here in Norway.

@djtaylorutube

3 жыл бұрын

@@DieterSchneider Interesting and yes I was thinking that 19mm would be the minimum. I did wonder if you had routed the ends yourself but clearly not.

What is that trim you are using on the roof?

how much in material and what did you use for a door and roof?

Really cool project but I am wondering why sometimes you use woodscrews and other times you use nail?

@kyled5638

3 жыл бұрын

some parts permanently put together with nails and other parts that can be taken apart and put back together with screws for being transported

What nail gun and hand held circular saw did you use?

I want to build something for myself. I don't have cutting tools but this is the least of the problem. You have some serious skill i can tell. You make it look easy. How much time took you

Good job! Could you give us the dimensions of the sheld, the sections of the woods you use and the types and dimensions of fixations?

@ryandury

4 жыл бұрын

Looks like it's roughly 4x8 based on the sheet of plywood he used on the roof.

@kittenbayouful

4 жыл бұрын

That's something to what I thought, but no, Dieter said 30 sq. ft. In a comment. I don't see it, just relying. '

How much did you build it for Vs cost to buy something similar? Thanks for the video 👍

Good 👍

Skills!

@dieter schnieder. What kind of van is that amd what is the model trailer you are using? Im in the market for both and that trailer looks slick!

@DieterSchneider

2 ай бұрын

It's a Ford Tansit Custom 2014 model

@chicagohavoc

2 ай бұрын

@@DieterSchneider Thanks, how about the trailer that you used to haul the materials?

Hi, what is the height difference between front wall and back wall to create that Skilion roof ?

Maybe I missed something but I don't see a cover on the roof other than plywood let me know please.

@bendikrdseth9855

3 жыл бұрын

If you look at part three, he's taking apart the shed for transport. He probably finished it at the delievery-site:) I choose to believe that he used metalplates or roof shingles:) That is atleast something thats is used a lot i Norway.

How do you call, the metal on the roof edge towards the end of the video!. ?

This is the one I'm gonna build. Awesome work! One question tho. Do the cross supports on each wall add structural support? I haven't seen them before.

@DieterSchneider

3 жыл бұрын

Yes it makes it extremely rigid.

@matthewisthebest

3 жыл бұрын

@@DieterSchneider First time for me to see this as well. Are those your thing, or standard building codes in Norway? I never see that in the Southeast US, so I was wondering why. Is it due to more snow in the winter putting heavier loads on roofs?

@LogHewer

Жыл бұрын

@@matthewisthebest Before modern sheathing, diagonal braces were always used to stiffen a frame. I still use them in addition to the sheathing.

@Swearengen1980

Жыл бұрын

@@LogHewer But they're not necessary at this point, especially on a build like that. A novice builder could easily just add a 2nd stud instead of trying to notch in a brace, but neither are exactly needed on such a short side with no door. On that shed, it's just a waste of time.

Good sturdy shed. Would like a cutting list 👌

@logmeindangit

Жыл бұрын

And I want someone to cut my steak for me. (Really, wouldn't that be nice? 😎) seriously though, a person wanting that could easily make a list of the boards used in each panel, then go to Excel and start listing them. If you want to guess at lengths, plug those in in another column, and in another column add price from the store for each raw piece. Then, in another column, add any cut notes you might want. I built two covered porches, no experience at it, just didn't know how to explain to a builder exactly what I wanted. So, I decided what size deck/floor I wanted, then the depth, and made a detailed drawing of it in... VISIO! Yeah. It worked great for thst, but was only 2D, so I had to draw each view as a new drawing. But I used supports thst were to code for beams and joists and really rigid roof rafters. Measuring the real dimensions of 1x4 cedar boards for the deck, I made one in Visio, width and lengrh, then created an "array" to make all of them, at the proper spacing. ( laid out on the drawing with a small gap between them ) Doing all that enabled me to make a complete materials list, including screws and other hardware, very clearly. I even laid out the plywood sheets for a pitched roof using Visio. I first made a front view, then used the measuring tool to see how long each side was to the end of the eave, and then figured out 4x8 sheet placement so I knew where the smallest pieces would be. Those I placed along the ridge, which in my case were long strips about 14" wide (long edge at the ridge). I was even able to lay out the steps, including rise, run, stringers, and even how to attach them, using that drawing program. Then it was jist a matter of counting (manually) each piece of each type, and listing it in Excel. That let me do my shopping a LOT more easily than what it seemed like I was facing at first. It took a long time, but I have t porches now that look great, and 18 years later, are durable and should outlive me by many decades. For appearance, I chose an A-frame pitch roof in front that matched the roofline of the house, and put composition roofing on it, like the house had. I had the company who reroofed my house back then leave me enough to do the front porch roof, too, when I got to that project. It took about 2-3 months to ger the porches done after the roofer did the house. In back, I chose a shed roof, and used painted steel roofing, because I wanted rain runoff to go away from the house, and metal for longevity of the roof, since it is mossy back there. Each "covered deck" is 8x16' with over a foot of overhang on the roof eaves. Northwest style, ample eaves, because we get a lot of rain. Not like California. Sorry to go on so long, but it's what I did for a materials and cut list.

@Swearengen1980

Жыл бұрын

@@logmeindangit How did you type all that without getting half way through and wondering, "does anyone have any common sense? It's right there in the video, just look and count....or decide on the dimensions that work for your needs and sketch it up". It's not rocket science. Most of it is elementary math. And all these people who keep asking....the dude sells his plans, not gives them away. It's right there under the video!

Think you can post the size of the shed and material needed for the project?

excellent

What is the name of the material that you used for the sidings?

@lcrazyjeff

3 жыл бұрын

It's called shiplap

how long time does it take you to build it + how much did it cost in materials?

only a skilled carpenter can do this !

Great job Did you use basebords for sidings? Does it last in winter time?

@MakingSawdust

4 жыл бұрын

It looks like ship lap with the board above partially covering the board below.

Nice job man.

@DieterSchneider

2 жыл бұрын

Thank you! Cheers!

Superb I love it

@DieterSchneider

3 жыл бұрын

Thank you! Cheers!

So what's your cost of building one of these and what are you selling them for?

@MrNightpwner

4 жыл бұрын

That's probably 700 to 900 in materials, 1 shed ain't enough to live

@mrcwoodworks4523

4 жыл бұрын

I would say 400 in materials and 1600 dollars 1200% profit

@I_Can_Do_That

4 жыл бұрын

The image for the video says she’d for 1500

Does it have a raised foundation? Didn't see the build for the floor. Does it neded shingles for the roof? Does it need paint?

@Swearengen1980

Жыл бұрын

That's to be sold and delivered. The owner would place the shed however they wished. On a concrete pad or foundation blocks most likely. Unless you want it all to rot, yeah, it needs a real roof and to be sealed/painted. Shingles if you want it to match your house, personally I'd just go with tin (galvanized steel roof panels) and call it a day.

13:05 that is when you need a dog or cat to come in.

Great video. Just curious how it was life-changing? I loved to hear a commentary on that.

@WBBClips

4 жыл бұрын

I’m guessing because it only takes 2 hours for him to build it, and he sells them for $1500 at a 1200% profit. Seems a little pricey at $1500, but I suppose there’s some rich people out there that’ll pay it.

@basehorhonda

4 жыл бұрын

@@WBBClips I assumed it had something to do with the business side of things, I was just curious what the story was behind it. I know the margins are great on something like this. Did it come when the business was low on cash? Was he able to pump a bunch of these out and save his business/marriage/etc. Like I said, I was just curious about it, hoping it was more than just a click bait title.

@torsi10

4 жыл бұрын

It is because he speeds up the build with fast forward, did you not see how fast he was moving!! :D

@ThisTall

4 жыл бұрын

WBB Clips it says 1200% “income” increase, not profit. All he’s saying is he’s selling them so well his income has increased 12x

@drippingwax

4 жыл бұрын

He wrote in his description for the first video: "How is this changing my life? It has become one of my most popular products, and they boost my (struggling) business. It's easy to make and has a pretty good margin. It also fits in a van (coming up in part two)."

I really don't know much about the subject but I am curious how the shed does in snow because the angle of the roof doesn't seem steep enough to me. I'm guessing that in your experience it is ok - is that accurate ?

@andriyshapovalov8886

2 жыл бұрын

You could always push off the snow if needed. The slop for plumbing is 1/4 Inch per foot I believe. So anything bigger than that is good enough for a shed in my humble opinion. But obviously the steeper the better.

thank

Very good job 👍👍👍👍👊👊

@DieterSchneider

4 жыл бұрын

Thank you! Cheers!