Nice build, nothing beats having a work station with full fume extraction.

@evolutionxstudios

8 ай бұрын

Thanks mate! 100%

So i stumbled across this video while looking at enclosure designs as I'm designing my own enclosure for resin printing and this video had a TON of useful info that I'll be applying to my design! Thanks :)

@evolutionxstudios

5 ай бұрын

Thank you for watching & commenting :)

Well done. Quick and to the point explanation of the steps. I have a Mars 2 Pro and a Mars 4 Ultra and am still trying to figure out how I will contain and vent the fuse from them. This is a great example that I may well have to emulate in my own build.

@evolutionxstudios

2 ай бұрын

Thank you🙏🏻

And a new Pope was selected.. Nice build

@evolutionxstudios

8 ай бұрын

Good one :D thank you!

Lovely video! Would you happen to still have the files for the filter?

@evolutionxstudios

28 күн бұрын

Thank you mate, just checked but unfortunately I can't find them anymore.

Hello what fan do you use for air extraction and how do you power it?

@evolutionxstudios

4 ай бұрын

It’s an in-line fan from Amazon that has a regular power plug

nice, os that little coal filter all you gonna do on it?? why not make a bucket system, before air do outside, iv seen some make em with the pellets too. also add a fan controll , like cause there possible times full blast from the thing not needed or wanted.

@evolutionxstudios

3 ай бұрын

Not exactly sure what you mean with bucket system. Since the air is going out of the window anyway I didn’t see a reason to over engineer that part. I only let the fan run for a couple of minutes after the print has finished

@user-vl8jv1tl5e

3 ай бұрын

@@evolutionxstudios some is bound to flow in again, if window not sealed and hose just laying in the window frame, and people could be outside? idk how you live. if you look up active coal , bucket system, acvarius pellets im just the cheap, DIY system will pop up

Moin, ich bin auch gerade dabei ein Gehäuse für meinen Drucker zu bauen, nachdem ich jetzt auch meine Reinigungsstation darin unterbringen möchte. Kannst du mir vllt sagen, wo du die Platten gekauft hast? Deine Preisangabe ist erstaunlich niedrig im vgl. zu Baumarktpreisen. Liebe Grüße

@evolutionxstudios

Ай бұрын

Moin, die habe ich bei Bauhaus bestellt. Such da mal nach Rohspanplatte Fixmaß (Natur, 800 x 600 x 10 mm)

@MrConTronics

Ай бұрын

@@evolutionxstudios genial, danke. Bei den anderen Märkten in meiner Umgebung gingen die Quadratmeterpreise ins doppelte davon oder es waren ungünstige Maße. Vielen Dank für die schnelle Rückmeldung!

Moin, sehr cooles Gehäuse. Eine ähnliche Konstruktion plane ich auch gerade. Läuft dein Lüfter die ganze Zeit beim Drucken? Mein Keller ist leider immer recht kühl und einen Schutz vor den VOCs brauche ich auch. Daher war meine Idee ein ähnliches Gehäuse wie du zu bauen mit einer kleinen Heizung. Den Drucker wollte ich dann während des Druckvorgangs in seinem eigenen "Dunst" bei ca. 25 Grad laufen lassen. Wenn ich das Gehäuse öffnen will würde ich mit einem kräftigen Lüfter aus einer Dunstabzugshabe die Luft ca. 1-2min vorher absaugen lassen. Die Absaugung würde ich dann während des Arbeiten und Reinigen dauerhaft laufen lassen. Vorteil der nicht dauerhaften Absaugung wären für mich die höhere Temperatur und ich würde mir nicht die teure warme Luft im Winter aus dem Haus saugen. So zumindest meine Idee😄

@evolutionxstudios

3 ай бұрын

Danke! Ne genau so mache ich es auch, der Lüfter läuft nur kurz vor dem öffnen.

I would buy your saturn.

@evolutionxstudios

6 ай бұрын

I'll keep it for now

Resin smell doesn't bother me, only use Siraya resin, the smell is stronger first time you open a sealed bottle but it dies down after a while. IPA is the reason i use a respirator, that has a very strong smell! My Saturn 3 Ultra has a built in exhaust space in the acrylic, it's basically a circle hole with a cover to connect it to a hose directly.

@evolutionxstudios

8 ай бұрын

It’s actually not the smell itself but the VOCs I’m more concerned with. But I agree, for me the washing is also way worse in terms of smell than the printing

@TheIcemanModdeler

8 ай бұрын

@@evolutionxstudios I don't print every day, sometimes i do a few weeks, other times months go bye without printing. Doing everything myself including sculpting so I'm all over the place. Those washing stations may be good but a lot of IPA is wasted and needs to be recycled, i just put the model in a large container filled with water and use a large brush dipped in IPA and scrub it like that. Every drop of IPA gets used and no need to strain messy IPA. Fairy seems to work instead of IPA but it required a lot more work.

@evolutionxstudios

8 ай бұрын

@@TheIcemanModdeler yeah I hate the whole process of resin printing. If the results in the end weren’t just so good