DIY Powered Subwoofer with Passive Radiator Build in reverse
Ойын-сауық
DIY Subwoofer Build in reverse with Passive Radiator and mjølner ( Thors hammer) as weight Hypex Plate amp. fun different Speaker Build
1 x Dayton Audio RSS390-PR 15" Passive Radiator
2 x Tang band 740P 8" subwoofer
1 x Hypex DS 4.0 Plate-amp
Thors hammer
Пікірлер: 89
This was fantastic. I had never considered building a box like that. Very unique, really creative.
Coolest subwoofer build out there, by far. Wasn’t sure what it was at first but glad I stuck around for the whole video. Excellent details and explanation, a lot of similar subwoofer videos out there but this one stood out
@mustbuildsomething
Жыл бұрын
Thank you for your awesome comment
16:09 In series you get 8 Ohms, they are connected in parallel :-)
@mustbuildsomething
Жыл бұрын
You are right sir 😅
Awesome build! Love that you built it so the drivers are visible, very cool. The TB's are wired in parallel of course 🙂. Thanks
@mustbuildsomething
Жыл бұрын
Thanks you for watching and the comment 😃
DUDE pop filter on mic ..but i love your idea a active band pass with passive radiator ..not a fan of passive radiators normally
Didnt realize how small your channel was. As I was watching, I thought for sure you would be a 50k+ channel. Wouldnt have even noticed had you not said something! Awesome build
@mustbuildsomething
Жыл бұрын
Thank you that`s really nice of you to say 😀
Incredible. you are a true craftsman
@mustbuildsomething
Жыл бұрын
Thanks 😃i still have some way to go though 😉
awesome video dude, it was really enjoyable to watch . totally loved it. left thumbs up, hope you can drop the hammer with some bass now lol
@mustbuildsomething
Жыл бұрын
Thanks means a lot that you liked it😀 I can now lift the mini hammer..... soon😅
I was so confused at first then I was like ohhh sweet a bandpass with a passive radiator. Enginious! Got a sub here for sure!
@mustbuildsomething
10 ай бұрын
Thanks I did try to make it a little different😂
@TimpBizkit
Ай бұрын
Well it's probably more like a ported box but the enclosure is around the outside in the square. To be fair, the bass head in me would make the same size box with 2 x 15 and 4 x 8 or something lol.
brother i am not going to lie this was one of the best build i seen because the way you show thing and the and scene was funny and same time i learn some thing thanks brother
@mustbuildsomething
Жыл бұрын
Im am so happy you learned somthing, thanks appreciate it. 😃
@wransuresh2262
Жыл бұрын
@@mustbuildsomething thanks brother
awesome build 👏 first time to see a setup like this.👍👍👍
@mustbuildsomething
Жыл бұрын
thanks 👍
Excellent workmanship , congratulations Palle 👍
@mustbuildsomething
Жыл бұрын
Thanks Poul
Wow bro Great peace of engineering!!!
This an awesome build and design.
@mustbuildsomething
Жыл бұрын
Thanks :)
I like it,so unique 👍
Looks cool but wouldnt it even be way better if u put those 3 chassis into a closed box?
Nailing the plate amp in the box not a good idea I will say he is skilled enough to do a clean job but there is a few whoopsie daisy's in there IMHO
pretty sure you wired them in parallel and not series, great build tho!
@mustbuildsomething
Жыл бұрын
you are right, sorry 😉
Btw got u a sub. Ur doing great.
Nice build!
@mustbuildsomething
Жыл бұрын
Thanks 😀
LOVE IT
amazing video
@mustbuildsomething
Жыл бұрын
Thanks
Pretty cool. Check out Steve Meade's tower build videos to see this done to the extreme.
Wow I was wondering why you needed the faces to be so rigid! This turned out amazing! Wish I could hear it Subbed at going a little bananas 😂
@mustbuildsomething
10 ай бұрын
Thanks I try to go bananas always.. Thanks for the sub😁
Perfect.......💯
that is a unique subwoofer. good work🔨
@mustbuildsomething
Жыл бұрын
Thanks 😅
Este canal merece muchos mas suscriptores ... Ahi va la mia y la de mi esposa aunque no quiera. Por el marro de Thooooor!!!
@mustbuildsomething
Жыл бұрын
Thank you, I got 99 problems but the wife`S not one😉
Informative. keep it up
@mustbuildsomething
Жыл бұрын
Thanks for watching and i will :)
Did u try to seal a side ??
I like the idea of this project. It's opposite and we all see the drivers in motion inside (outside). 🤣🤣
@mustbuildsomething
Жыл бұрын
Yes that was my exact idea, i like to watch mechanics 😀thanks for watching😉
BTW, u got 👍 and subscription:*
I thought initially it was going to be plexiglass around the edge with the window. But then I realized it was the woofers inside. There was a thin gap between the inner and outer walls which housed the airspace. How much airspace is there in this box design? I like it a lot!
@mustbuildsomething
Жыл бұрын
I don`t remember airspace in cubic feet or liters. Calculateted for a tube design but it should have been bigger than it is. The stuffing should help though. :) Thanks for the commet
@BARBELLS-AND-BUDS
Жыл бұрын
@@mustbuildsomething I appreciate the reply and love the design. Not something I've seen before..
Nice
16:07 rly nice build:) series 4+4=8 :p
@mustbuildsomething
Жыл бұрын
you are so right they are wired in parallel ;)😅
I got to be the thousandth like 👍🏼
You could stop blowing in your mic or use a pop filter. Good thing wanting to build a subwoofer but try not destroying ours.
Cable around the center steel rod is not a great idea. As it's only 2 loops the effect power is very low but with each bass boom it's a degausser just on top of a magnet :-)
@mustbuildsomething
Жыл бұрын
Great input didn`t think of that 😀 normally its like 800 years do you think im still good for like 20? 😀
@frederichardy8844
Жыл бұрын
@@mustbuildsomething yeah, probably more, that was really just for the fun 😀
@frederichardy8844
Жыл бұрын
@@mustbuildsomething and also I would have put the common on the amp, not on one speaker (speaker --- amp --- speaker, not amp --- speaker --- speaker) because the first part of the cable borrows the power for 2 speakers. And the lenght of the cable from the amp is doubled for the second speaker so a greater loss of power and a little dissimetry between speakers. But all these are so small details that there is no audible differences, it's just my OCD 😀
@mustbuildsomething
Жыл бұрын
@@frederichardy8844 I totally get that. :) I wired them so that on driver gets plus first and the other minus so the current should be timid and equally distributed 😂 i wired them in parallel, not in series ass i wrote 🙃😀
What do you mean by reverse polarity? The woofers should push the radiator both same way!
@mustbuildsomething
5 ай бұрын
The drivers back function as the front side of the cone so they are both in reverse 🙂
bro thats badd af... is it a passive bandpass?? how much air space is there for those drivers? dude im blown away at the quality of the video and the box build but bro your creativity is second to none!!! keep building and doing videos and I promise you sir you will get a couple KZread silver and gold play buttons!!!
@noahlitosworld9024
Жыл бұрын
nvm I seen in other comments that you dont remember the air space! all good great job again im so impressed!
@mustbuildsomething
Жыл бұрын
Thanks for the comment. the air space was calculated like a ported design though on the smaller side 😀
This video look like asmr
@mustbuildsomething
Жыл бұрын
Thanks 😊
Like like 👍🦎
@mustbuildsomething
Жыл бұрын
Thanks
WOW WOW WOW WOW 😱😂
@mustbuildsomething
Жыл бұрын
😀
Where can you find that Amp at?
@mustbuildsomething
Жыл бұрын
i think it is discontinued. but Parts Express sell a lot of different plate amps. If you are in EU I think Sound Imports is great :)
I watched the whole video and in the end all I was left with was a big WHY?
@mustbuildsomething
5 ай бұрын
It was an idea. So i tried it out 😉
@spiroszaharakis2648
5 ай бұрын
fair enough@@mustbuildsomething
Крутоо 👍👍🇺🇦🇺🇦✊
ù
It's gotta be the ugliest sub woofer I've ever seen... I thought it was a joke to start with 🤣😂🤣..!! The passive radiator should be mounted vertically not flat by the way .... the reason being that the mass load has gravity pulling it down and it presents added diaphragm stiffness when it moves up !! This causes non linear displacement!!
@mustbuildsomething
10 ай бұрын
Thanks for the comment 🙂
Winisd! is useful,no need to play with the weights
OB dual opposed with PR waste of time and resources.
Interestingly useless build, a very low output subwoofer, especially giving its size!