Let me know if you will a giveaway on one of this keycaps.

@whiteli9htnin

3 жыл бұрын

I would love a give away

@battlestationsuk12

3 жыл бұрын

I'd love a giveaway! Message me on here or Instagram, @battlestationsreview and we can give you a platform for it!

@EJTechandDIY

3 жыл бұрын

Will do, thank you!

@icecubemademedoit5181

2 ай бұрын

pathetic and lazy way to ask for free shit

These are amazing! If you decide to make any more, you should make the Escape key an Abra! (Because they always teleport / run away!)

would love to see an updated video with any tips you've learned. Also a video (or series) going further into the steps of each of the processes. Was a great watch! thanks for recording it!

@EJTechandDIY

2 жыл бұрын

Thank you, glad you like it. I have been working last few weeks on improving my designs I will be making a video soon.

I'm so happy i found your channel, I'm learning so much from you! Thank you !

@EJTechandDIY

3 жыл бұрын

Thank you so much, happy to know that you're are enjoying the videos :)

amazing video 👍 I love seeing the whole work process from start to finish. I just started getting into custom keycaps and this was definitely a helpful video 😊

@EJTechandDIY

3 жыл бұрын

Jen thank you so much, and I'm so happy to know that you enjoyed the video. Good luck making your own keycaps.

Thank you for sharing your experience! It was really interesting and useful!

Beautiful. Hardwork pays off.

This looks amazing man keep it up👏🏼 Very high quality videos aswell hope your channel grows overtime because you are very talented

@EJTechandDIY

3 жыл бұрын

Thank you so much for the compliment I really appreciate it.

Haha I love it *sprinkles sand, squirtle is now on the beach*

@EJTechandDIY

2 жыл бұрын

Well, I got the sand from the beach hahaha.

This is incredible, thanks for making this video!

My god. Those are so great. Thx for the idea.

@EJTechandDIY

3 жыл бұрын

Thank you so much, glad you like it.

ang gandaaaa nakakalokaaa ♥

I LOVE THESE SO MUCH

@EJTechandDIY

3 жыл бұрын

Thank you so much.

I finished watching the video then looked at your sub count and was shocked you definitely deserve at least 100k

@EJTechandDIY

3 жыл бұрын

Thank you so much, comments like this really make my day.

@westonsnider6705

3 жыл бұрын

I literally thought the same thing. Can't wait to see what your channel turns into!

thank you for actually wet sanding resin. I see way too many videos of people sanding resin DRY and kicking up tons of harmful resin particles

@EJTechandDIY

Жыл бұрын

Thank you for watching, im actually working on a new on keycaps, i have been working on it for the last 3 months non stop. And like you said those particles are not good for you.

Wow! So inspiring and cool - very well done, thanks for showing! This might actually be the thing that has convinced me that I gotta buy a resin printer at some point...!

@EJTechandDIY

3 жыл бұрын

Thank you so much for taking the time to watch the video. Yes resin printers are in another level of detail is amazing the things you can print with them.

@JakobDam

3 жыл бұрын

@@EJTechandDIY - Yeah, I haven't really had the need for doing sub-5cm stuff in great detail... until now. I expect that I'll find out how very bad I am at painting figures if I try to replicate what you've done here, so kudos for your skills!

@EJTechandDIY

3 жыл бұрын

@@JakobDam thank you, but I have to say don't be scare of trying, trying is better than doing nothing. If I can you can do it too.

Amazing work!

Wow, those look so good!

@EJTechandDIY

3 жыл бұрын

Thank you glad you like them

Looks so pretty for a first timer

@EJTechandDIY

2 жыл бұрын

Thanks glad you like them.

This video save my life haha. I'm so happy thank you so much

@EJTechandDIY

3 жыл бұрын

Well, your comment made my life a lot better :). Thank you.

Very cool, painting the details was beautifully done. A closer look would be nice. What a long process, I appreciate artisanal keycaps more now.

@EJTechandDIY

2 жыл бұрын

Thank you, I will be making more for sure. and I have a macro lens now.

@bluemush86

2 жыл бұрын

@@EJTechandDIY will you be selling you keycaps, I think they look pretty cool.

great job awesome detail

@EJTechandDIY

3 жыл бұрын

Thank so much.

Very cool man! Love these, I'm not a fan of Pokemon but they look great!

@EJTechandDIY

3 жыл бұрын

Thank you so much for the compliment, I really appreciated.

Talented.

@EJTechandDIY

Жыл бұрын

Thank you!

Certainly some interesting things you have done, I am doing FDM stuff and learning just basic brush painting on larger items. But I could see this behind a direction of trying in the next few years.

@EJTechandDIY

3 жыл бұрын

One tip if you want to smooth fdm print look im to expoxy or uv resin to fill the gaps. It saves allot of time on the sanding process.

@zzing

3 жыл бұрын

@@EJTechandDIY I have some epoxy I am planning on using. Just need the right part for it.

WOW these are so amazing.

@EJTechandDIY

3 жыл бұрын

Thank you, happy you like them.

@Aznmaniac951

3 жыл бұрын

@@EJTechandDIY where can I find the box you use for casting the keycaps

You’re extremely talented! Well done! You have my brain gears running lol

@EJTechandDIY

3 жыл бұрын

Hahahaha thank you so much, Im working right now on a better version of these keycaps.

This is very good video. Thank you very much

Incredible!! 😲

@EJTechandDIY

3 жыл бұрын

Thank you so much!

Hi, i find your stl keycap, you are my hero men!! Thanks

@EJTechandDIY

10 ай бұрын

Glad it helped

👏👏👏👏👏👏🥰 love it, congratulations!! Kisses from Spain

@EJTechandDIY

2 жыл бұрын

Gracias Lau, hope to be in your country again this year.

I would pay u to do something like that for me no joke that's so dope

loved the video! i have a quick question, do you think it’s viable to make a full resin keyboard or will it just feel weird when you’re typing/gaming?

@EJTechandDIY

3 жыл бұрын

Thank you, and no it feels the same the only thing that changes a little bit is the sound of the keyboard when typing. so yes this is 100% viable I want to do something like this my self, where I cast a full set of keycaps of deferent colors in resin

@alexkuczynski2548

3 жыл бұрын

i mean if you are worried about texture, you could always sand them so they are a bit rougher on top. However this would make clear epoxy foggy

I love this keep it up

@EJTechandDIY

3 жыл бұрын

Thank you so much

when putting the keycap onto the tooth picks , you should actually use some of that blue wall putty. Its alot easier than using hot glue imo.

hi! what material did u use to 3d print them? they look amazing!!

Oh gosh thanks for this video! I learned alot! Can I just ask what brand of silicon mold are you using amd where can I get it? Thank you!

@EJTechandDIY

2 жыл бұрын

Glad you liked the video,I just got shore 15 silicone from a local shop in my country it’s Nothing special.

Hey, great video, love it. :) I started sculpting keycaps 6 months ago, next thing is to buy resin 3d printer and this video is what i needed to see, it is everything i am looking for :D Quick advice for keycaps and resin casting. When u make a keycap for mold casting try to make them a bit more rounded, so pokemons will apear better :D Also try square shape of pokemon stand, it looks more natural. If i were you i'd make a mold of pokemons so i don't need to print and sand them all over for next round :D Z-butt is verry good and when you finish top u just turn it around, sprey some mold release and go for the base of keycap, results are amazing. My english isn't very good but i think you'l understend most of it. Hope i helped a little :D

@EJTechandDIY

3 жыл бұрын

Thank you for all the tips, next for me is to buy a pressure pot too. This is a really fun hobby

Awesome vid! just wondering is the link you provided to the keycap base, is that the full size key? or is it the half size that you put the pokemon on?

@MagicWood Craft hello, what would you recommend me to set the exposure time and layer thickness when printing? Do you think 2.5 seconds and 0.020 mm are good? I would like to benefit from your experience? Thanks in advance :)

Greetings from Turkey bro! This video is epic, appreciate it! Thanks a lot!!! :)

@EJTechandDIY

3 жыл бұрын

Hey thank you so much, glad you liked the video.

@leanderoeo6391

3 жыл бұрын

@@EJTechandDIY bro is there a discord channel that I could in?

@leanderoeo6391

3 жыл бұрын

@@EJTechandDIY about 3d keycaps? something like community?

@EJTechandDIY

3 жыл бұрын

@@leanderoeo6391 Yes you join their discord channel discord.gg/nUsyadp

You can use white or any light or pastel colors for the base.

@EJTechandDIY

3 жыл бұрын

Will be using other colors for the next ones

Can you make an artisan keycaps base for clear design for the spacebar, shifts, and enter?

what a great video, you motivated me to try it Can you pass the slt of the big keys?

Awesome 🙂

These look awesome! For some reason the Amazon link isn’t working for me, what 3D printer do you use?

Wow nice 👍🏼🔥

Hi why we need pressure pot to make keycap?

Such a great job bro 👏

@EJTechandDIY

3 жыл бұрын

Thank you🙂

@MusicbyAnt

3 жыл бұрын

@@EJTechandDIY actually i was wondering did you create the stl for the pokemon or you found it online? id like to try to make it myself but i doubt i can model this on my software lol

@EJTechandDIY

3 жыл бұрын

@@MusicbyAnt I got the pokemon's files from CGtrader, but you can find some free from Thingiverse

What grit of sandpaper did you use and great work man .

Hi. Is the keycap used smaller than the one used for the initial mold? Thanks

Your keycaps so amazing !! And what kind of color you use for spray and paint the 3d pokemon?

@EJTechandDIY

3 жыл бұрын

Thank you, i use Vallejo and createx paint

Nice job

@EJTechandDIY

Жыл бұрын

Thank you!

Very noice congrats

@EJTechandDIY

3 жыл бұрын

Thanks

Hi!, sorry for my english, I'm new in this world and i like your videos and channel, i am learning a lot with you. I want to know what n° of sandpaper do you use for the keycaps. Thanks a lot and I'll be supporting you in next videos.

excelente

@EJTechandDIY

Жыл бұрын

Thank you Wilson

Is there a way around having to 3D model the figures? Seems difficult.

Amazing

@EJTechandDIY

3 жыл бұрын

Thank you.

hi! did you 3d print the casting system as well? do you have the model for it?

@EJTechandDIY

3 жыл бұрын

Yes I 3d printed them, you can find everything right here github.com/imyownyear/Z-Butt

Hi!! Really amazing video bro 😍 at 2:15, the grey bases are printed in resin or PLA? thank you for share all this process

@EJTechandDIY

Жыл бұрын

Hey Christopher, This are made with a resin 3d Printer Anycubic photon mono X

@jostopherwilliam

Жыл бұрын

@@EJTechandDIY bro! the black keycap is just a mx cherry keycap model? today i going to print the pieces for the silicon mold and the keycaps in resin, i question for the difference of size between the flat keycap with model and the black keycap

Please help. I don't know English. The site is difficult to use. Please tell me what files you need to download so that the keycap form is like in your video?

after you print what is your full size of your keycaps in mm?

Any idea how tall you made the figures? I feel like I have no space to work with to make the keycaps normal sized

@EJTechandDIY

3 жыл бұрын

I don’t remember, for this type of things you will need to use a caliper

Would you mind sharing your fusion files for the keycap?

few questions 1: how did you get the small details to paint the pokemon soo good? 2: dont see the mold that you use for your keycaps can it be 3d printed with pla?

@EJTechandDIY

3 жыл бұрын

The details are really hard on something this small, take your time, and don't be afraid to just start again. And the keycaps base is printed on an SLA resin 3d printer.

@hyper4games967

3 жыл бұрын

@@EJTechandDIY so the Z-butt system can be made out of resin?

@EJTechandDIY

3 жыл бұрын

@@hyper4games967 I recommend you to print the box from PLA and the small parts from resin

what size brushes are you using for the painting the small details?

@EJTechandDIY

3 жыл бұрын

I use a number 0 and a number 2 for small things like this

Hey there, those look super dope. Are you interested in doing commissions? I was looking to make my own, but while the Z-butt system is fairly easy to come by, I think getting a resin printer, an airbrush and paint setup like you have probably would make it too expensive to DIY.

how can I get that pokemon 3d files? I cant find models fit in keycap. If I resize and limit the z axis with 10mm x and y will be incredible little.

@EJTechandDIY

2 жыл бұрын

I use 3d builder to resize files. The software is free

@ferdieraslan8317

2 жыл бұрын

Can you give me files which you resize?

Hey i printed the Keycap base and if i press the button all the way down it sticks, i measured and the space between is 14.10 mm(correct?), that is smaller then the switch do you have the same problem?

@EJTechandDIY

Жыл бұрын

The printer and type of resin used can affect this, what you can try and do it is put the cap in some worm to hot water and then press it in the switch.

How come the 3d printed pokemons don't have any lines on them?

can i just using water to wash a silicon? or should I use what material?

@EJTechandDIY

3 жыл бұрын

Yes you can, recommend you to add a little bit of soap to the water

question, where did you bought those pokemon designs??

How long does it take u to make one key cap?

헐ㅠ 뭐야 진짜귀엽잖아ㅠ

This video just made me order a resin printer a couple seconds ago hahaha

hey I'm worried about durability if I print keycaps with standard resin how long can that stem really hold because resin prints are fragile

@EJTechandDIY

Жыл бұрын

Now I dont print them anymore I cast them from epoxy resin also right now im working on a new video about keycaps. but I have to say the ones I printed like a year ago are working perfectly with no issues, I use ABS like resin from siraya tech. good luck with your projects

@nikuu541

Жыл бұрын

@@EJTechandDIY tysm for really fast reply, the only issue with resin keycaps r they r really hard for mass production but with 3d printed resin like u can print 6-7 in 2 hrs and give it a coat of uv resin and they are ready to ship

@EJTechandDIY

Жыл бұрын

@@nikuu541 that is why resin keycaps are so expensive, one of a kind that takes allot of effort to make. But I understand what you mean and abs like resin is good for keycaps prints

@nikuu541

Жыл бұрын

@@EJTechandDIY tq

You have a new sub ! Today i bought my ld-002h ! do you have stl's for de base of the keycap ? Thanks ! Great Job

@EJTechandDIY

3 жыл бұрын

Thank you so much, i actually forgot to upload it but will be doing so today after work.

@onibegood2653

3 жыл бұрын

@@EJTechandDIY thanks man ! I need the base to put the pokemon. the system already looks for it in discord as you indicated.

@EJTechandDIY

3 жыл бұрын

@@onibegood2653 discord is for the z-butt system, the keycap base i will be uploading it tomorrow and i will let you know.

@onibegood2653

3 жыл бұрын

@@EJTechandDIY :(

@EJTechandDIY

3 жыл бұрын

​@@onibegood2653 Hey my apologies i'm really busy but here is the link bit.ly/2ORoJcS

I really want the file for the tiny pokemons but I cant find it anywhere. Can someone help?

youre the best :)

@EJTechandDIY

2 жыл бұрын

Thank you so much Fay.

where did you get the pokemon models? also y the supports ?

@EJTechandDIY

3 жыл бұрын

From cgtrader, you need the supports to 3d print them.

Hey! What size are Pokémon on top of the bases??

@EJTechandDIY

3 жыл бұрын

They are around 3mm.

@thisguy_games

3 жыл бұрын

@@EJTechandDIY noted! THANK YOU

where did you buy the z-butt system? I don't see it on the video description.

@EJTechandDIY

3 жыл бұрын

Hey here is a link: bit.ly/3qWpGyZ

@rjevangelista9769

3 жыл бұрын

@@EJTechandDIY thank you.

@EJTechandDIY

3 жыл бұрын

@@rjevangelista9769 You welcome :)

You should do more of these

@EJTechandDIY

3 жыл бұрын

I will, im now editing a video for a custom wrest rest.

@kaaolin

3 жыл бұрын

@@EJTechandDIY sounds lit , got the notis on wont miss it

@EJTechandDIY

3 жыл бұрын

@@kaaolin Thank you!

Can you make a new video how to create molk up the keycaps in application before printing?

@EJTechandDIY

3 жыл бұрын

Sure, that sounds like a good idea, will be showing it on my next video

@anugrahragilsaputra4094

3 жыл бұрын

@@EJTechandDIY i'm waiting for sure

@shinyNinja_420

2 жыл бұрын

I really feel that I am missing out on a lot of things without a 3D printer -_- If you ever do a giveaway, PLEASE tell lil ol me..

can i let something custemize by u and ofc pay for it ? its 1 pritty simple theme for 1 tab key

nice try looks good

helal emeğine sağlık

Do you still have the pokemon 3d print file?

F Charmander :( nice video, the look very pretty!

@EJTechandDIY

2 жыл бұрын

Thank you, Charmander will be in a future video for sure.

omg i waant.

what silicon are you used in this video?

@EJTechandDIY

Жыл бұрын

I recommend you to get some Smooth-On silicone

Where did you buy your 3d printer and how much did it cost ?

@EJTechandDIY

2 жыл бұрын

I have an Anycubic mono x but you can buy a smaller for things like this. I think the Anycubic mono is around 300.

the stem cavity on your keycap base stl is too small so it doesn't fit on most stems without jamming on it

Lol and to think I almost got scammed by spending 700 on ghe Pokémon keycaps set that everyone goes crazy for especially on reddit lol! thank God I seen this. Saved me money making my own design later on today

@EJTechandDIY

3 жыл бұрын

Good luck with your project.

hows this only have 5k views tf???

@EJTechandDIY

3 жыл бұрын

You just added another view, thank you so much :)

How can you resin the keycaps without a pressure pot?

@EJTechandDIY

3 жыл бұрын

I have a vacuum chamber and I use slow curing resin

@user-nw8ln5qx8p

2 жыл бұрын

@@EJTechandDIY What are the advantages of the pressure pot? It seemed to me that the vacuum chamber removes bubbles very well...

So cool! 🙂🙂

@EJTechandDIY

3 жыл бұрын

Thank you!

no cure inhibition with platinum silicone?

@EJTechandDIY

2 жыл бұрын

I always give the 3d printed parts a coat of varnish and for some parts i first make a copy with tin silicone.

This is so fucking cool

Wow this is amazing bro. Are you selling too?

@EJTechandDIY

3 жыл бұрын

Thank you glad you like them, I'm not selling yet but I will be doing so.