OCV / DVVT / VVT-i / VTEC clean filter. Tools and parts available from Lazada and Shopee and Mr. DIY
Жүктеу.....
Пікірлер: 40
@ronymooney61752 жыл бұрын
New subs for amazing knowledge, thank you bro for sharing. Keep it up!
@rymrymshah Жыл бұрын
Thank you bro
@naznazrin85882 жыл бұрын
Great content, but how to remove the sensor socket because theres no tab or notch tried pressing and wiggle still not coming out
@nazacelcom16483 ай бұрын
Thanks
@khamale37873 жыл бұрын
Recently i found the dvvt on perodua viva and i actually felt like oh! How this function? and how it wire?
@jeffrimanan1223 Жыл бұрын
👍
@shah83ija874 ай бұрын
already subscribe and like. thank for the info..
@Njangchl13662 жыл бұрын
Nang antap...kongsi cara service ocv alza
@thequeue348216 күн бұрын
Never knew this dvvt solenoid needed cleaning. Did it improve ur alza performance after the cleaning? And does the dvvt filter needs to be changed over time?
@hafidzalipok65472 жыл бұрын
Nak tanya kenapa lampu teko nyala.mula2 guna ok.dah lama guna baru nyala.
@jh-ow2zd
2 жыл бұрын
Bahaya kena pergi kedai scan. Oil pressure kurang
@normasfazlymdarifin88872 жыл бұрын
please make tutorial how to change engine mounting alza boss.I searching in youtube nobody do.just myvi not alza..please make one sir...
@jh-ow2zd
2 жыл бұрын
Sorry no plan to do.
@fashqilasric80552 жыл бұрын
Boss, nak tnya, alza saya lepas service aircond timing jadi heng, keluar simpang mcm hilang power, apa yang rosak?
@jh-ow2zd
2 жыл бұрын
Servis aircon tak kacau timing.Buat servis apa? Tukar komoressor ke?
@fashqilasric8055
2 жыл бұрын
@@jh-ow2zd tukar piping aircond, servis compressor
@danielpuzi4288 Жыл бұрын
Boleh share mesin yg you guna untuk cek error code Alza?
@jh-ow2zd
Жыл бұрын
In kena pergi kedai scan. Ada kedai bagi percuma je. Kalau pergi Perodua SC dia caj dalam RM10-20
@goodgood30742 жыл бұрын
Why not renew the o ring?
@jh-ow2zd
2 жыл бұрын
You can!
@mohdhanafimohdrazali7756 Жыл бұрын
Kena selalu bersihkan ocv sensor ni ker,saya baru tahu selepas menonton video ini
@jh-ow2zd
Жыл бұрын
Tak payah kalau pandai jaga minyak. Tukar on time jangan pakai minyak tiru
@kelvin73293 жыл бұрын
hi, have you tried removing the filter?
@jh-ow2zd
3 жыл бұрын
No but many others have done it successfully
@metzmatu8409
3 жыл бұрын
It is a wire mesh kind of strainer. If it is not torn just clean it by pray with carb cleaner or blow with air pressure. Make sure not over tighten when install. The OCV filter union bolt torque spec. is 5.3~9.8Nm. Tip: If you remove the union bolt and you no filter attach to it, you can use a long nose plyer to fish out the strainer/filter.
@jhp88163 жыл бұрын
Hi how often should we clean the solenoid in the video?
@jh-ow2zd
3 жыл бұрын
As i said in the video, the perodua solenoid does not have a screen filter so u actually dont have to clean it. You only have to clean the filter. But if you always change your engine oil on time you only have to clean it after 8 years
@sapfaruddinjolhata25638 ай бұрын
x kembang ke nanti o-ring dia tu tuan?
@jh-ow2zd
8 ай бұрын
Kalau kembang kena tukar
@fahmi89992 жыл бұрын
Myvi got this?
@jh-ow2zd
2 жыл бұрын
Yes
@mohdyani87932 ай бұрын
what name a filter
@jh-ow2zd
2 ай бұрын
No name. No need buy new. Just take out clean
@mohdadnan79993 жыл бұрын
bos klau d krta myvi 2005 ada jgakh tu filter?
@jh-ow2zd
3 жыл бұрын
Saya rasa ada juga. Kena check, kalau ada DVVT, memang ada
@mohdadnan7999
3 жыл бұрын
@@jh-ow2zd ok bos.trima kasih.nnti sya cek
@mohdadnan7999
3 жыл бұрын
@@jh-ow2zd done sabkarib😁
@leesashazwaniofficial1165
2 жыл бұрын
nak tanya lepas servis dvvt...nak reset lagi ke?
@metzmatu84093 жыл бұрын
Tips: - OCV Filter bolt torque 17.1~31.9 Nm. - OCV Solenoid bolt torque 5.3~9.8 Nm. NOTE: • Be sure to completely remove any foreign matter that may lodge at the installation hole or oil control valve. • Prior to the installation, apply engine oil to the O-ring section and make sure the O-ring is not twisted.
Пікірлер: 40
New subs for amazing knowledge, thank you bro for sharing. Keep it up!
Thank you bro
Great content, but how to remove the sensor socket because theres no tab or notch tried pressing and wiggle still not coming out
Thanks
Recently i found the dvvt on perodua viva and i actually felt like oh! How this function? and how it wire?
👍
already subscribe and like. thank for the info..
Nang antap...kongsi cara service ocv alza
Never knew this dvvt solenoid needed cleaning. Did it improve ur alza performance after the cleaning? And does the dvvt filter needs to be changed over time?
Nak tanya kenapa lampu teko nyala.mula2 guna ok.dah lama guna baru nyala.
@jh-ow2zd
2 жыл бұрын
Bahaya kena pergi kedai scan. Oil pressure kurang
please make tutorial how to change engine mounting alza boss.I searching in youtube nobody do.just myvi not alza..please make one sir...
@jh-ow2zd
2 жыл бұрын
Sorry no plan to do.
Boss, nak tnya, alza saya lepas service aircond timing jadi heng, keluar simpang mcm hilang power, apa yang rosak?
@jh-ow2zd
2 жыл бұрын
Servis aircon tak kacau timing.Buat servis apa? Tukar komoressor ke?
@fashqilasric8055
2 жыл бұрын
@@jh-ow2zd tukar piping aircond, servis compressor
Boleh share mesin yg you guna untuk cek error code Alza?
@jh-ow2zd
Жыл бұрын
In kena pergi kedai scan. Ada kedai bagi percuma je. Kalau pergi Perodua SC dia caj dalam RM10-20
Why not renew the o ring?
@jh-ow2zd
2 жыл бұрын
You can!
Kena selalu bersihkan ocv sensor ni ker,saya baru tahu selepas menonton video ini
@jh-ow2zd
Жыл бұрын
Tak payah kalau pandai jaga minyak. Tukar on time jangan pakai minyak tiru
hi, have you tried removing the filter?
@jh-ow2zd
3 жыл бұрын
No but many others have done it successfully
@metzmatu8409
3 жыл бұрын
It is a wire mesh kind of strainer. If it is not torn just clean it by pray with carb cleaner or blow with air pressure. Make sure not over tighten when install. The OCV filter union bolt torque spec. is 5.3~9.8Nm. Tip: If you remove the union bolt and you no filter attach to it, you can use a long nose plyer to fish out the strainer/filter.
Hi how often should we clean the solenoid in the video?
@jh-ow2zd
3 жыл бұрын
As i said in the video, the perodua solenoid does not have a screen filter so u actually dont have to clean it. You only have to clean the filter. But if you always change your engine oil on time you only have to clean it after 8 years
x kembang ke nanti o-ring dia tu tuan?
@jh-ow2zd
8 ай бұрын
Kalau kembang kena tukar
Myvi got this?
@jh-ow2zd
2 жыл бұрын
Yes
what name a filter
@jh-ow2zd
2 ай бұрын
No name. No need buy new. Just take out clean
bos klau d krta myvi 2005 ada jgakh tu filter?
@jh-ow2zd
3 жыл бұрын
Saya rasa ada juga. Kena check, kalau ada DVVT, memang ada
@mohdadnan7999
3 жыл бұрын
@@jh-ow2zd ok bos.trima kasih.nnti sya cek
@mohdadnan7999
3 жыл бұрын
@@jh-ow2zd done sabkarib😁
@leesashazwaniofficial1165
2 жыл бұрын
nak tanya lepas servis dvvt...nak reset lagi ke?
Tips: - OCV Filter bolt torque 17.1~31.9 Nm. - OCV Solenoid bolt torque 5.3~9.8 Nm. NOTE: • Be sure to completely remove any foreign matter that may lodge at the installation hole or oil control valve. • Prior to the installation, apply engine oil to the O-ring section and make sure the O-ring is not twisted.
@jh-ow2zd
3 жыл бұрын
Tq sifu!👍👍👍