DIY ORNAMENTS WITH ALCOHOL INK | DIY Christmas Ornaments
Тәжірибелік нұсқаулар және стиль
These DIY Christmas Ornaments are so easy to make and look AMAZING! You can personalize them with your die cutting machine (I used a Cricut Joy) or just leave them as they are!
Looking for a box template to hold your ornaments? Click here for template → bit.ly/3LplcM1
❤️ Leave some love & subscribe → bit.ly/2UFcZef
Hit the bell icon so you don't miss any of my new videos! 💕
*********************************************
Some links below may be affiliate links.
VISIT WEBSITE:
Shop → diycrafttutorials.com
DESIGNS USED IN THIS VIDEO:
Ornament Box Template → bit.ly/3LplcM1
PRODUCTS USED/MENTIONED IN VIDEO:
Cricut Joy → cricut.pxf.io/doBDa7
Tools + Accessories → cricut.pxf.io/oeMGqE
Vinyl Transfer Tape → cricut.pxf.io/jWb5dv
Cricut Joy Mats → cricut.pxf.io/b3XqqB
Ornament Balls 4" (100mm) → amzn.to/3Bs8fMY
White Vinyl → bit.ly/3O3oNTa
Colored Alcohol Inks → amzn.to/3BMy4Zw
Metallic Alcohol Ink → amzn.to/3DzSE0C or amzn.to/3dk02mf
Ink/Glitter Adhesive Options:
Crystallac Brite tone (resin alternative)→ amzn.to/3BLqA98
Polycrylic (Polyurethane)→ amzn.to/3eNwLMV
Cabothane (Polyurethane, must be gloss finish) → bit.ly/3lmq7zI
FONTS:
Font → bit.ly/2UdggjT
SHOP SUPPLIES:
💙 Shop Craft Vinyl → bit.ly/3POZVQi
💜 Shop my Amazon Favs → www.amazon.com/shop/diycraftt...
💚 Shop Cricut → cricut.pxf.io/ORqz0N
Cricut Machines → cricut.pxf.io/QODGO6
Tools + Accessories → cricut.pxf.io/oeMGqE
Materials → cricut.pxf.io/b3XqOb
Basic Tools Set→ cricut.pxf.io/6bjxXN
Weeding Tools → cricut.pxf.io/QODGOx
Cricut Heat Presses → cricut.pxf.io/WD59DZ
Join Cricut Access → cricut.pxf.io/n1MA19
FAVOURITE WEBSITES FOR COMMERCIAL USE FONTS AND GRAPHICS:
Creative Fabrica → bit.ly/3tTp0jZ
Font Bundles → bit.ly/3UvIKDo
Design Bundles → bit.ly/3DLeg7g
SoFontsy → bit.ly/3AG7rUA
Creative Market → bit.ly/3qULWLi
CONNECT WITH ME:
Website → diycrafttutorials.com
Instagram → bit.ly/2U5JSjQ
Facebook → bit.ly/2VDjzRM
Pinterest → bit.ly/3dGdhcx
TikTok → bit.ly/3jAWZ8t
My second Channel → bit.ly/3ddrv45
Follow me on Cricut Design Space → bit.ly/3MaWdyw
Join our Private Facebook Group → bit.ly/3DvyaGu
WATCH MORE VIDEOS:
See all Tutorials → bit.ly/3UgBJ9f
Keychain Tutorials → bit.ly/2JYwqf6
Cricut Tutorials → bit.ly/2W2tKTW
Resin Tutorials → bit.ly/3EF3DEh
Craft Tutorials → bit.ly/3kweWpX
As an Amazon Associate I earn from qualifying purchases.
DISCLAIMER: It is your responsibility to make sure that you familiarize yourself with the consumer product safety guidelines for your country before starting any project. Use products and materials mentioned at your own risk. DIY Craft Tutorials shall not be liable for any direct, incidental, consequential, indirect or punitive damages arising out of access to or use of any content available on this channel.
© 2022 DIY Craft Tutorials
#cricut #craft #christmas
Пікірлер: 63
Absolutely gorgeous, well done 😊
Beautiful and so creative. 👍🤗
Beautiful! Can’t wait to make my own
Beautiful!!
Just Beautiful! 🤗
This is gorgeous :) Just bought some of those clear bauble's today and planned on doing sprinkles for our candy land theme, but this is so much more artistic!!!!
Gorgeous
So beautiful 😍
How long do you let the poly sit before dropping in ink?
How many of polycrilic can I add for a bauble of 60mm?
Hello, I’m in the uk and can’t seem to find any of the Cabothane Water Based Polyurethane/polyacrylic?
What font did you use?
How much glitter did you use for each?
May I ask why the polycrylic first?
Did you buy your inks from somewhere in Australia? I see your link takes you too Amazon. I am in Queensland.
can you use regular clear glue?
I dont know what happening to mine the ink isn't as bright as yours and it leaves a wet amount from the oil and the glitter won't stick it clumps
That looks so cute and easy to make 🙂
@DIYCraftTutorials
3 жыл бұрын
Thank you ☺️ They are!
Just stunning! How long do you let the polyurethane dry before adding inks???
@DIYCraftTutorials
3 жыл бұрын
20 minutes
Beautiful!!!!! How do they stand up year over year?
@DIYCraftTutorials
2 жыл бұрын
I have had them for over a year now and they are exactly the same as when I made them! If done correctly, you won't have any issues.
Absolutely Beautiful!!! What an excellent gift idea
@DIYCraftTutorials
3 жыл бұрын
Thank you! 😊
Will diluted mod podge work rather than polycrylic?
Love the ornaments and the techniques! Does it work to use glass ornaments instead of plastic? I have a bunch of glass ones
@DIYCraftTutorials
Жыл бұрын
Yes it does :)
Hi there, these are beautiful! Are you using glass or plastic baubles? I am having trouble finding glass baubles anywhere! Thanks, Kim
@DIYCraftTutorials
2 жыл бұрын
Plastic baubles. Glass blanks are hard to come by 😔
@Miranda-bj5nd
2 жыл бұрын
hey I know this is late but I found some at joann's a couple days ago!
These are beautiful what font did u use ?
@DIYCraftTutorials
3 жыл бұрын
Beyond Infinity
Is polycrylic ok, instead of cabothane? How long do you have to work with it before it dries?
@DIYCraftTutorials
2 жыл бұрын
Yes, they are the same thing
@DIYCraftTutorials
2 жыл бұрын
I wait about 5 minutes
Your baubles are white but I didn't see you use any white. Or did you? If you didn't use white, how did you produce the white? And how long should you let dry before adding the ink?
@DIYCraftTutorials
3 жыл бұрын
I used white glitter which coated the inside
What is the purpose of the polycrylic inside?
@DIYCraftTutorials
2 жыл бұрын
It holds the glitter in place
could you use pigment ink too ?
@DIYCraftTutorials
2 жыл бұрын
Yes
What purpose does the poly serve? I’ve been attempting to do with with just the ink and it is still transparent. Is this the reason why?
@DIYCraftTutorials
Жыл бұрын
It acts as a spreading medium to move the ink abit further. Have you added glitter? The glitter stops the transparency.
@jenniferjurick3633
Жыл бұрын
I have not tried that but I definitely will. Thank you!
When I use the glitter at the end it just soaks up the ink, clump up and falls out leaving blank spots inside. Am I using too much ink? What am I doing wrong?
@DIYCraftTutorials
2 жыл бұрын
Try using a little less ink and then leaving the ink dry alittle before glitter
Can you use polyurethane for this project?
@DIYCraftTutorials
2 жыл бұрын
yes you can
Hello! Love these. Can you clarify Polycrylic or cabothane to order? Clear? Glossy? Etc. theres many types. Thank you!
@DIYCraftTutorials
2 жыл бұрын
Hello! I have links in the description to the products. You can use polycrylic or cabothane (they are the same product with a different name). Always use clear with a glossy finish.
@paulaneely6722
2 жыл бұрын
I’ve done the inks before but never used the poly gloss.. what is the purpose of the gloss on the inside ?
how do you get the alcohol ink to splash like you have? Mine just runs into the bauble and doesn’t spread nicely. I’ve left it for 20 mins and until it goes almost clear, but it just looks messy
@linda6466
2 жыл бұрын
As has mine
@Miranda-bj5nd
2 жыл бұрын
I think high humidity has to do with it. the colder the weather, the better. same thing if you're trying to create any ripple effects. Also, be sure and use 91% alcohol and not 70 as it wont be strong enough. hope this helps :) I've had lots of trial and error
I must be doing something wrong ! 😭. My attempt looks ok. But not great and pretty like yours. I’m using the exact same stuff and colours! I started with the gloss and let it drip out for 20 minutes. Then I went with the alcohol ink but it’s really runny (same brand). I’m not even using a lot. Just little drops like you. But it doesn’t look like yours. Then when I add the glitter at the end yours covers it all and the open areas. I shook like a mad woman and it still didn’t cover ! Also what’s the white bottle ? Is it just white ink? Or something else as maybe that’s the problem? Help! X
@DIYCraftTutorials
3 жыл бұрын
Hello! The white bottle is Piñata Pearl white but you don’t actually need it. What polyurethane are you using? Maybe let it dry long if it is colder weather where you are... until it is almost clear.
@rubielynzamora3341
3 жыл бұрын
I am also having the same problem 😔 I've done 3 different dry times for the polycrylic and the alcohol ink is still runny. Also using the same alcohol ink in the video as well. The result is still nice but it's more challenging cuz then I'll have excess alcohol ink in the ornament running around
@4yodz4
3 жыл бұрын
@@DIYCraftTutorials thanks for coming back to me. It might be the polyurethane so I’ve ordered another to try out and yes it’s cold where I am. Maybe I got too inpatient and didn’t let it dry for long enough. Will see how the next batch goes haha x
@deborahshaw4489
3 жыл бұрын
me to. I think i might try the cabothane as i was using Jo Sonjas. Even super fine glitter is not sticking with varnish i am using :-( i dont know if leaving it too long to dry or not long enough
@4yodz4
3 жыл бұрын
@@deborahshaw4489 exactly. It might be too long that it’s dried up, Or not long enough ! I think the gloss I used has a long dry time. I’ve ordered a fast drying one so hopefully 20-30mins should be enough! Just waiting for it to come so I can try again. Will keep you posted.
Polyurethane of minwax