✪ Do you want me making Wooden FM radio version?

@renatoturkovic4299

5 жыл бұрын

Yes

@LX3575

5 жыл бұрын

with full range speaker 5 inch :)

@liamarnaud

5 жыл бұрын

Yes

@duytoantvxdthienphuc

5 жыл бұрын

👌

@1b2b-videot

5 жыл бұрын

yes

Блиииин !!! С этой работой и делами вообще из головы вылетело что можно в данное время сварганить что угодно !!! Всё же теперь в любом количестве и в любом виде купить и наслаждаться собственными игрушками!!! Ты молодец!!! Большой тебе ЛАЙК!!!!👍👍👍👍👍👍👍👍👍👍👍👍👍👍

As a kid I always wanted to make something like this. The technology just didn't exist to integrate these kind of components back then. So fun to see you make this. Now I just might have to make a few of them. SO so cool! Thanks for this video.

Ofher than wiring the left speaker to the right channel and vice versa, great job

@TheSpotify95

3 жыл бұрын

And using just 5W speakers on a 60W amplifier And only using two speakers instead of four And using a wi-fi antenna for FM reception (a decent FM aerial would have been better) And using unknown capacity 18650s, which could be OK, but could be almost dead?

Now that is an awesome blueprint for a fine project.

Parabéns meu amigo e Mestre, você é o melhor entre os melhores!!! Fica na PAZ, e um grande abraço deste seu admirador aqui do Brasil.

Thanks for the great idea on how to install this device, good job

Выгонять пузыри носком - это сильно)))

Also this has a spesific wireing 2 front and two rear outputs

Really cool. I've been planning on doing this out of wood. The screws for the handle need to be longer with something to screw into. Maybe a piece of wood. I would also use a car or radio antenna that looks more like a radio antenna. Maybe an auto extending one. Not sure how big they are and if one would fit in the box. Really neat build.

Really nice idéa and tuto 👌 Thank you ✌️

Very nice project easy to duplicate, no crazy tools required!

@fabianohenrique9834

3 жыл бұрын

FABIANO

ここまで本格的に作る人は少ないので見てて面白いです。 箱を木の板で組むのも良さそうですね。 いろんな音を楽しめそうです。

Muito bom o. Projeto.fiz o meu com fonte pc

Amazing built speaker video keep it up and it sounds amazing too

Excelente trabajo felicidades y gracias por compartir sus conocimientos saludos

My favorite radio

Gostei Ficou Show Top 👏👏👏👏👏

You did fantastic job 👍👍👍 I see you sealed up the back and made it inaccessible for future repairs or modifications.

@nadaan_baalak

4 жыл бұрын

Destroyed in seconds 😂🤣

@sciencekingdom2322

3 жыл бұрын

Yeah

Alan Walker songs - my childhood 🤩

Cool concept always fancied building something similar

Носком? Это круто, так и надо. Ору....

wow... good job brother

Ahaha muito show, mas isso era comum nos anos 80 , si vendia pronto , com bandeja e tudo , tinha os q vc ainda colocava o famoso Tojo, um show de equalizador , era 10

Olá. Eu já construi um gabinete assim isso foi na época dos toca fita decada de 70 para a irmã do meu cunhado e adapitei o toca fita para o meu cunhado na estante da sala ficou até legal. Boa sorte amigo você trabalhou bem no seu projeto que ficou excelente. Abraço! Rio de Janeiro Brasil

thats a great idea ,,you have skills

Đoạn test radio vui nhất 😂

@vanthanh.2002

5 жыл бұрын

Người việt

@kien3766

5 жыл бұрын

Nghe kênh 98.9 là rõ nhất kk

Gracias x el proyecto me a sido de mucha utilidad

Die Idee und die Umsetzung sind nicht schlecht. Optisch gut, aber im Aufbau und technisch stark verbesserungswürdig. Die Materialauswahl ist furchtbar. Da wäre Sperrholz aus Pappel oder Birke eine deutlich bessere Wahl gewesen. Der Schaumstoff ist absolut ungeeignet. Mit Holz hätte man die Box auch vernünftig abdichten können, was den Klang auch um einiges verbessern würde. Ebenso sollten beide Lautsprecher, auch wenn es "nur" Breitbandlautsprecher sind, jeweils ihr eigenes Volumen haben, bzw. auf jeden Fall vom Radio und dem Akku räumlich getrennt sein. Auch das würde den Klang noch weiter verbessern, denn so gibt es zu viele Objekte mit Kanten, die die Schallwellen brechen und verzerren. Die Lautsprecher sollten auf jeden Fall nach vorne hin abgedichtet und nach hinten etwas gedämmt werden. Eine Ladestandanzeige, oder Voltmeter, wären auch sinnvoll, um den Status des Akkus zu wissen. Das Zündungsplus würde ich nie mit dem Dauerplus verbinden, sondern über einen externen Schalter anschließen. An die hinteren Lautsprecherausgänge des Radios würde ich zwei kleine Tieftöner (es gibt gute 4, oder 5 Zoll Tieftöner zu kaufen) über Frequenzweichen anschließen, um den Klang noch weiter aufzuwerten.

Just try not to drop the speaker, with all that hard work, the frame material looks it can fall apart with 1 drop. However, nice project!

@officelvikasdada

5 жыл бұрын

Jfsn Isxa kscce ajfe s ogsce

@MichaelRabbitBass3

4 жыл бұрын

I was very disappointed when I seen it was made out of Styrofoam and that that wasn't the template.

Make it with a subwoofer and Real wood better speakers🔊🙏i love your videos

@XCreation

5 жыл бұрын

good idea!

@hugodejesushernandezramire5173

5 жыл бұрын

@@XCreation what material is this friend

@charleslo5024

5 жыл бұрын

@@hugodejesushernandezramire5173 foam

Итак, что же мне не понравилось? Динамики нужны 4 Ом, мощности ну ни как не такие маленькие. Потом динамики надо было поместить в раздельные объёмы. Теперь по логике подключения. Смотать два плюса и подключить на элементы 18650? Для чего? Чтобы магнитола постоянно тянула заряд из аккумуляторов? Все таки добавить кнопку цепь силового плюса и включать его сначала кнопкой, а потом хвататься за пульт. Антену на мой взгляд лучше было поставить на заднюю стенку и убирать её, чтобы вообще не видно было (ну мало ли кому может не понравится смотреть на антену?). Заднюю стенку сделать съёмную для простоты модификации или ремонта. Размеры побольше, так как и магнитоле больше воздуха для охлаждения и динамикам объём нужен, тем более каким-нибудь 16,5 см, которых нормальная магнитола прокачает аж 4 штуки. Ну и блок питания поместить внутрь устройства! Теперь о хорошем. Первое, это ручка. Давно такую или подобную ищу!!!! Второе, в принципе аккуратно сделано! Третье, давно не видел подобных пленок самоклеек. Чего бы ещё добавил? Индикатор заряда аккумуляторов и возможно световой эквалайзер.

From Vietnam Thank for your great video!!!

Bravoooooooooooooooooo 👏👏👏👌

the radio comes with that connector of the speakers at the time of purchase

@otavio138

3 жыл бұрын

Ele meteu solda no negocio

I have exactly the same car stereo, planning to use it for this project😅

Impresionante. Te felicito por tu actitud.

BR tamos aí, muito top

Hy this is super cool

@XCreation

5 жыл бұрын

thanks

@jefesonjesus641

5 жыл бұрын

Jeferson

Es tan genial felicitaciones espero ver el siguiente video

Excelente aporte y gracias por el recuerdo

Eso fue excelente trabajo pero me gustaría a mí acerlo

Beautiful design but no sound insulation on the inside sounds empty box.

Recuerdo ese proyecto de secundaria...se volaron mi idea

Parabéns ficou ótimo

12:09 Lol, every speaker vid uses this song. :P

А можно в след. видео машину вокруг магнитолы построить с помощью носка и китайского скальпеля?

I want these guys to make me one and have it shipped to America this is incredible.

Great job with the step by step.

Nice idea :) I might have a go myself at something like this. Also like the idea of using 11.1V using 18650 Li-Ion batteries, as they can be found everywhere for cheap. Just a couple of improvements I would make: 1) Wire up 4x speakers, as the amplifier allows it, or have 2x external speaker clips on the back, for hooking up a pair of external speakers. 2) Use decent quality speakers that match the rating of the amplifier, for best sound and maximum longevity. Pairing a 60W amp with a 5W speaker is not a good idea. 3) That aerial looks neat, but won't perform very well except for strong signals. The wavelength (and therefore required aerial length/properties) at 2.4GHz (wi-fi aerial shown) is much different to that of a 100MHz signal (middle of FM band), so you need to use a 75cm telescopic at the minimum (or a 1.5m dipole/ribbon aerial). 3a) Potentially have an external aerial socket as an option 3b) That aerial connection solder joint (from car aerial to 2.4GHz aerial) won't provide optimal signal transfer, use proper connectors and impedance matched cables. Other than that, great :)

@XCreation

5 жыл бұрын

thank for your usefull suggestions :)

@Duake1

5 жыл бұрын

Amp is 14 watts RMS at best. Pairing that with 5w speakers is fine. If it was opposite, it would be weak.

@TheSpotify95

5 жыл бұрын

@@Duake1 So they're lying with the 60W rating... still, it wouldn't hurt to use 10-20W speakers, so that it is more in line with the rating (realistic or quoted) and less likely to blow the speakers up. You'll also get better audio quality than with smaller 5W speakers. I might make one of these myself. I've seen the exact same amplifier as this one on eBay, and it does FM, AUX, BT, SD and USB, which is just about everything I need.

@Duake1

5 жыл бұрын

@@TheSpotify95 While I can agree with a lower RMS rating, 5W would work just fine considering the material. Sound quality mainly depends on the source as well as a crossover point and EQ if needed if the source cant do it.

@TheSpotify95

4 жыл бұрын

@@Duake1 If you were to use proper wood, which I will do when I make one of these, then the 5W speakers would be a bit weak. I wouldn't use the foamy stuff because it is too fragile. The video also used full range speakers instead of a tweeter and woofer (and also only 2x speakers at that!). I've got 4x LG 65W speakers lined up to use, salvaged from an old surround sound system. If required, I can then add in a pair of tweeters afterwards. Initial tests did find that the amp was quite weak, but then again, I won't know for certain until I've got it in an enclosure, and I'll use 4x speakers instead of 2x speakers, which will help significantly. I'll also have external speaker terminals for in case I want to add different speakers - as I have the guts from an old 3 way system lying around somewhere and I might just create a pair of 3 way speakers.

Носком это круто 😁

Oak veneer,sneaky but effective!

Muito bom parabéns 👍👍👍

Ты б еще из линолеума корпус сделал.

это если есть деньги только на автомагнитолу а на автомобиль еще нет )))) .

@user-gu7pc4xt5j

5 жыл бұрын

Согласин.

Estupendo trabajo mi querido amigo...pero una pena que no haya aprovechado las otras dos salidas, así como acolchar todo el interior del recinto para las vibraciones de baja frecuencia. En todo caso, los altavoces son muy pequeños para ese dispositivo....Muchas gracias por compartir compañero.....

Ahhh, those cold solder joints on the BMS and exposed battery terminals.

5W speakers for 60W system? WIFI for FM antenna? Metal screws on foam board? ... nice going bro! LOL

@TheSpotify95

5 жыл бұрын

Yeah, not so great is it... From what I've found out, if you combine the knowledge of all of these DIY speakers/radios together, you should get one good product. I saw someone using Logitech Z5500 speakers with a 2x 3W amp. That won't work well (waste of 62W speakers). This won't work either as you'll destroy your 5W speakers easily with a 60W amp. You want to make sure that you match the amp's rating with the speakers' rating. Also you are right in that a 2.4GHz (wi-fi frequency) antenna will not work well at all for 100MHz (center of FM band) signals. You need a telescopic antenna, or any antenna of 75cm length (or 1.5m for a fixed aerial). That tiny aerial will only work in strong signal areas.

@TheSpotify95

4 жыл бұрын

@@simplydoge4730 I tried using a pair of Pioneer "110W" 4 ohm speakers with this. They are actually 20W RMS, and even they struggled. You want 60W 4 ohm speakers for this (I have some 8 ohm 100W speakers which are perfect).

Золотые руки.👍👍👍😀

Nice sound box.

Esta muy buena su creación lo felicito

Great idea and good job my idol!

@TheSpotify95

5 жыл бұрын

I'm going to make one of these myself, with the same head end, but a few improvements :) 1) 4x 65W LG speakers 2) 11.1V 6Ah Li-Po batteries (might have two sets in parallel for 12Ah) 3) 75cm telescope FM radio aerial for better quality signal :)

4x60W on 2x5W nice 😂😂😂

I've already done something similar months ago, but on a way bigger scale. I used a Bluetooth head unit, (2) 6.5 inch speakers, (2) 3.5 inch speakers, (2) 10 inch subs, a 400 watt amp, a wooden toy chest, and it's all powered by a Xbox 360 power brick. I also made a smaller one inside an ammo box with a BT head unit, (2) 4.5 inch speakers, powered by a rechargeable battery pack.

hola X creation, gran video, tengo misma situacion para Usar con solamente 2 parlantes, cuales cables uso de los 4 pares??? o que colores uso? tengo par de verdes par de grises, par de violetas, y par de blancos. muchas gracias.!!! al usar solo 2 lineas se estropea la radio ? gcs!

fm antenna signal booster and external wifi antenna are not in the video description

@hussanhussan7900

5 жыл бұрын

حه

@TheSpotify95

5 жыл бұрын

Doesn't really matter, because a 2.4GHz wi-fi antenna is not the correct antenna to use with 100MHz (0.1GHz) FM broadcasts. Boosting a poor quality signal will not make much difference. You need a 75cm telescopic antenna for FM. Maybe then add the booster if your signal is still weak.

Maybe with better materials but its still really nice. You are a talented dude 👍🏾

My next project. Good job!

👍👌👏👏👏

Would been better if he use real wood

@macarenapaz6211

2 жыл бұрын

Me llamo joelpresa

Hay quá Good fan vietnamese

Класная штука. Я такую собрал лет 20 назад. Не помню что меня натолкнуло на такую идею. Но музон рубал просто класно.

Would be way better if you used wood and better speakers

@omnimediagroup5761

5 жыл бұрын

EG 95 it’s just a proof of concept. You can always take this and improve on it

@ltnationradio8348

5 жыл бұрын

I know right

Из этого материала, может быть, только Г...

@user-sb2xs5bd9j

4 жыл бұрын

и качество монтажа г....

@user-qb9wo6tx3b

4 жыл бұрын

И компаненты тоже г

I want to make an old retro looking FM/AM radio with Bluetooth, micro SD card slot, and foam core board or cardboard is great because it wouldn't be anything anyone would want to walk off with. Plus no woodshop tools needed.

Классные видео у тебя получаются лайк и подписка

Total cost (approximately calculated)- ~Rs.4000 (~ $57)

идея конечно не плохая, но вот неаккуратно всё, да и материал не лучший (предпочтительно дерево -дсп или фанера)... акб не желательно прислонять к корпусу , лишний нагрев им вредит.

@scientistcat4942

5 жыл бұрын

А то, что всё это выглядит как детская аппликация, тебя не смущает?😮

Professional work... Good

Great idea my friend!!

Can I know where you got the charging port from? I would like to do something similar for my school project....

@andrewgmorgan13

4 жыл бұрын

Any 12v charging port like a laptop or other things I just did it Friday it really easy

Gran estafa 😂

What's the best tool for sticking mailer with wood design to plastic-a sock😂😂😂 cool project!

Super travail je vais partager cette vidéo 👍👍👍👍👍👍

Great,I will make my version.I will use wood for box,12v motorcycle battery and 70w 2 way speakers.I dont know how long will these 5w speakers last?😕

@spikes4762

5 жыл бұрын

Renato Turković 1 Second 🤨🧐🙂

@Duake1

5 жыл бұрын

Based on what you play and a HPF for highs using a capacitor, this can get pretty loud. People dont understand how speakers and watts work. I have a 9v power amp from old $8 computer speakers powering 60 watt RMS 6.5" 3 ways in a board that is just lodged in my daughter's dresser top shelf.

I like your videos but please have the music change and not repeat as well it repeats at a bad point btw. Also please like the materials used to create this! I am tempted to make a speaker so i hope you can list it!

@lemurmad

5 жыл бұрын

Thanks for the like!

Le falto unos led's dentro de las bosinas para q se viera mas chingon de loq esta!!!👌

"Ghost dog" with Forest Whitaker ...

I thought it was made from real wood

@spikes4762

5 жыл бұрын

WojtekTechTips me too right 🤨😂

Прикольно место тряпка и насок сайдёт

@mohanchoudhary4866

5 жыл бұрын

душа хулигана mv

@alfredodominguez7602

5 жыл бұрын

Borrar

@SuperHeadhanter

5 жыл бұрын

хаха)

title should be "making a radio out of a radio"

Nice work but .some change must first specars 5 watt to small as per amplifie capacity.add one 4 intch sub woofer.in separate close chamber with air vent or bass radiater . .nice work 👍🙏

Cade os BR vendo esse video

@compartilhamentos.saudaveis

5 жыл бұрын

Olha euuuuuuuu aqui 😄😄😄😄😄😄😄😄😄😄😄😄😄😄😄😄😄😄😄😄😄😄😄😄

@EBSSilva

5 жыл бұрын

Estou aqui

@paulohenrriquepr

5 жыл бұрын

E aí galera

@eudessantos8983

5 жыл бұрын

Estou aqui

@isacbernardes3075

5 жыл бұрын

Oia nois ai kkkk

Можно было сделать компактнее, и использовать новую магнитолу нет смысла. Проще блютузколонку купить

@user-co6rz8xh8s

4 жыл бұрын

А корпус с пенопластыря, за ручку возьмёт, и отвалится верх колонки))))))

Thanks for this video!

That remote control is soooo cute

Tấm a làm khung là tấm gì đấy ạ

@hoanganhluong4242

5 жыл бұрын

Fomex

@pipii1522

5 жыл бұрын

@@hoanganhluong4242 cảm ơn bạn

No mames güey cálale con una norteñita para que veas que se oye perron 🤣🤣🤣🤣🤣🤣🤣🤣😋

@josseenriquez3035

5 жыл бұрын

Raymundo Resendiz concuerdo contigo

@juanmodesto4354

5 жыл бұрын

Jajaja solo eso le faltó

@dandymontana6336

5 жыл бұрын

Esa madre no aguantará a sonar x mucho y además si le suben el volumen seguro se apaga x la falta de amperes

@martinhernandez6198

4 жыл бұрын

Yo tengo un generador como el de el pero el probéma es que cuando pasa 1 hora aproximadamente se calienta el transformador y empieza a oler a quemado días después me di cuanta que tiene un selector de voltaje y sopuse que ese era el problema así que lo gire hacia la parte que dice 240 v y ya no huele a quemado pero se sigue calentando que hago?

the same model but with 2 10 inch speakers. 2 tweeter and 2 LEDs round 1 inch.and a carstereo and a eliminator 12 volts. and the sound was very loud and very good sound.

I'm curious as to why you made it out of white bread? All the flexing on the top panel when you installed the handle just lets me know it will break unless you never move it.