Video to hopefully give some people inspiration and ideas to build their own equipment.
Жүктеу.....
Пікірлер: 103
@leobaltz2057 Жыл бұрын
That are the heights on the front and back legs. Sweet built! This is the best design I have found anywhere!! Thank you for sharing!
@that1guydoesthings
Жыл бұрын
Front are 16", rear 24". Thank you very much, I appreciate it!
@dondale68 Жыл бұрын
Great idea on that ''holesaw CAM''. Never thought of that, Thanks
@that1guydoesthings
Жыл бұрын
Thanks for watching!
@jafquist27 Жыл бұрын
Thank you for posting this video. Nice job. I've been building mine, in my head, for several years. It has many elements similar to yours. A cheap drill is absolutely the way to go. For that matter, I plan to keep a new spare(or two) on hand at all times.
@that1guydoesthings
9 ай бұрын
I first had a jig saw moving the table. If I could've found a way to tame it, I think I would have stuck with it. It was just too inconsistent. Thank you for your input, and good luck on yours!
@Calvin203012 күн бұрын
Nice video indeed. Must give it a go. Thank you 🙋♂️
@chrisschultz1580 Жыл бұрын
I love this build. I'm a great fan of all DIY amateur engineering.
@that1guydoesthings
Жыл бұрын
Thank you Chris. I'm the same, it's fun to see creative minds solve problems.
@ancesthntr Жыл бұрын
Fantastic idea - and you’re right, those machines are hideously expensive. Would love to see some plans, even if they cost a few bucks.
@that1guydoesthings
9 ай бұрын
Will have to see if I can draw up some simple plans. Thank you.
@TrapperBV Жыл бұрын
I absolutely love this. I was planning on building something similar this summer, but this is basic excellence and a step above what I was thinking. Well done sir!
@that1guydoesthings
Жыл бұрын
I'm glad the video is helping. Thanks for watching and the sub!
@ricksteen935
Жыл бұрын
This by far simplifies the process SO MUCH. I’ve modified my own design numerous times as it slides back an forth, but the bump action looks like it deals with wet castings extremely well!!! Thanks for getting my brain unstuck.
@KingVB4 ай бұрын
Love the whole set-up 😮 my first worms are already on the way, im way too excited) much love from Ukraine, you are an inspiration ❤
@that1guydoesthings
4 ай бұрын
Thank you so much! Good luck on your worm journey! Any questions, feel free to ask.
@PaulBengtsson Жыл бұрын
Very nice setup. Well thought out and it will save hours of work for others.
@that1guydoesthings
Жыл бұрын
Thank you.
@jdhall229 Жыл бұрын
Thanks for the look into your system
@that1guydoesthings
Жыл бұрын
Thanks for watching!
@milkmaan7272 Жыл бұрын
Very clever man I think I will give this build a try!!!
@that1guydoesthings
Жыл бұрын
That's what I want to hear! Thank you and feel free to reach out with question.
@racebiketuner2 ай бұрын
Very interesting design!
@thomasenglish1 Жыл бұрын
This is great! I was thinking of building a similar design but using vibration… an easy hack you can test for noise reduction, try some thin weather strips on the underside of the bracket so it’s not metal on metal.. Might also try the same to dampen the wood on wood noise. Again, great work! I appreciate the video!
@that1guydoesthings
9 ай бұрын
Thank you, I appreciate the feedback. The more noise reduction I've tested, the less effective the "thump" is to clear the screens and keep things moving. I suspect I could play with the angle more to compensate.
@sparksmcgee6641
2 ай бұрын
Yeah, vibration motors are only $20-$30. I happen to have one and a whole lot of drills.
@danthebeeman Жыл бұрын
You could sell the plans for this very easily
@that1guydoesthings
9 ай бұрын
I am learning CAD, hopefully I can post some soon. Thank you!
@justagirlsd3000
2 ай бұрын
@@that1guydoesthingshave you posted the plans?
@NanasWorms11 ай бұрын
Hope to see more videos from you in the future! I'm not ready to build a power sifter. I'm just a home vermicomposter so I don't mind if my castings aren't sifted. But this is an impressive design. ~ Sandra
@that1guydoesthings
9 ай бұрын
Thank you! I will try to post more soon. I have a couple things I'd like to share with the community.
@mr_aznpersuasion42086 ай бұрын
Ingenious my friend! Thank you.
@that1guydoesthings
5 ай бұрын
Thank you!
@kap402012 күн бұрын
great build! could you elaborate on why the screen with the round holes is used for ENCs?
@rikobrtube2 ай бұрын
Great idea, thx for sharing.
@A-V Жыл бұрын
Nice rig 👍🏻 Thanks for the demo
@that1guydoesthings
Жыл бұрын
I've watched hours of your videos! Thank you for watching and putting out the videos you do! They were quite helpful when I started.
@A-V
Жыл бұрын
I wondered if your cam was just a circle with a hole offset from the center, or perhaps something more fancy... like an egg-shapes profile sorta like you see in automobile camshafts, or perhaps even a seashell shaped profile that would cause a more sudden jolting action. Looks to me like the simple approach gave you some great results 👍🏻
@AJsGreenTopics Жыл бұрын
Great job.😎
@that1guydoesthings
Жыл бұрын
Thanks AJ!
@WorldComposting Жыл бұрын
Wow great design! I was looking at ways to change my sifter from a recip saw to a drill. I might try this out!
@that1guydoesthings
Жыл бұрын
Thank you! I remember watching yours when brainstorming for mine!
@ricksteen935
Жыл бұрын
Dude!!!!! This could not have come at a better time. Had a fire do have to rebuild from the ground up, house and wormry. The original sifter that I built was ok base on a reciprocal saw and never worked as envisioned. This has serious prospects!!!! Thanks
@WorldComposting
Жыл бұрын
@@that1guydoesthings Glad to hear!
@johnwilliamson4231 Жыл бұрын
Great job!!
@that1guydoesthings
Жыл бұрын
Thank you!
@johnallen1308 Жыл бұрын
You can probably put a dimmer switch on the drill to control the speed more easily. Great build I was looking for hardware cloth today to build a sifter
@that1guydoesthings
Жыл бұрын
Thank you. A dimmer switch is a good idea. I will incorporate at some point.
@wingnutbert9685
9 ай бұрын
@@that1guydoesthings I'd caution that idea. The drill is designed to run on the full 110/115v AC. Choking down the volt supply could do damage to the drill.
@MandJ_MarketFarm Жыл бұрын
Great work. Looks like it would work as a gold drywasher.
@that1guydoesthings
Жыл бұрын
Thank you. My father in law uses it for his artifact hunting hobby, he seems to like it.
@troygarza5720 Жыл бұрын
Thank you for this honestly
@that1guydoesthings
Жыл бұрын
Thanks for watching and the comment, makes making the videos worth it to know they are helping.
@Mikeyy_Shortz9 ай бұрын
Haha I love it. Nice invention
@that1guydoesthings
9 ай бұрын
Thank you!
@ginkat13189 ай бұрын
Outstanding
@that1guydoesthings
9 ай бұрын
Thank you!
@lew7678 Жыл бұрын
Very cool idea, if i ever start making enough of the stuff I'll give this a try. The one looked up was very very expensive. Sub for future worm content
@that1guydoesthings
9 ай бұрын
Thank you very much!
@gnawbabygnaw5 ай бұрын
Nice work
@that1guydoesthings
5 ай бұрын
Thank you!
@Rews-fishshed Жыл бұрын
Would love to see a plan/ design of this looks great I just started with red wrigglers and was think of doing something like but yours is far better than what I thought of
@that1guydoesthings
9 ай бұрын
Thank you! Will see if I can get some plans drawn up.
@Rews-fishshed
9 ай бұрын
@@that1guydoesthings thank you I’d be very interested in that
@wormweirdo340 Жыл бұрын
Nice!
@that1guydoesthings
Жыл бұрын
Thanks!
@paullueders5218 Жыл бұрын
cool man!
@that1guydoesthings
Жыл бұрын
Thank you!
@frankarmstrong7083 Жыл бұрын
This is great, need some dimensions or sketch, my brain is already working on noise reduction and I think I have it with a simple modification.
@that1guydoesthings
Жыл бұрын
Thanks Frank. I had springs and rubber bumpers that made it very quite, found the thud helps knock material thru the screens and prevents plugging. I will make a better build video soon w more dimensions.
@inforestsweheal Жыл бұрын
Genius!
@that1guydoesthings
Жыл бұрын
Thank you!
@lastnightsdinner2 ай бұрын
Genius
@lazygardens Жыл бұрын
Interesting way to get multiple sizes in one pass.
@that1guydoesthings
5 ай бұрын
It does the trick! Thanks for watching!
@Breeding_of_California_worms Жыл бұрын
👍👍👍
@that1guydoesthings
Жыл бұрын
Thank you!
@milkmaan7272 Жыл бұрын
How think was the metal you chose to work with I'm thinking of trying to use 29 gauge flashing. I've never worked with metal couldn't find any videos going over the basics but I think it shouldn't be to tricky . 😅
@that1guydoesthings
Жыл бұрын
24 guage sheet metal. Making some cardboard templates may save you some headache. Thanks for watching!
@ricksteen9357 ай бұрын
Dude, where did you find that 3/16” screen in that length???
@that1guydoesthings
7 ай бұрын
Menards, but most local hardware stores carry 24"×24" pieces. Notice the seam, I had to use the off cut to get the length I needed. Turned out the off cut was almost exactly what I needed to make up the difference.
@ricksteen935
7 ай бұрын
@@that1guydoesthings Thank you most kindly!
@chrisbreen6618 Жыл бұрын
respect
@that1guydoesthings
Жыл бұрын
I Appreciate it!
@MsLbraun4 ай бұрын
So the rod is straight into the drill?
@that1guydoesthings
4 ай бұрын
Yes. If you have trouble getting the drill to tighten onto the threaded rod tight enough, you can grind two flat spots on the threaded rod for a better bite.
@mileawayhoney10 ай бұрын
cool
@that1guydoesthings
5 ай бұрын
Thank you!
@lauriebareham4200 Жыл бұрын
Gidday mate, I am on my way to the hardware store for most of the materials, but wanted to ask you which drill to buy? I think you said an industrial one, but not sure which. Maybe you could tell me your drill and I will just get that one. Thanks in advance
@that1guydoesthings
Жыл бұрын
Mine is a Skil brand. If you are getting one dedicated for the job I would get a cheap corded drill. If you intend to use it for more than the sifter I would spend a little more and get battery powered. Maybe ask some friends, good chance someone has an old one laying around you could try out.
@lauriebareham4200
Жыл бұрын
@@that1guydoesthings Well I copied everything you did and made the hole thing including the sifting trays. However I have run into a problem. I have put 5 nuts and 5 washers on in total, but when the drill is turned on every things works perfectly for a minute and then I notice that the rod is moving down away from the drill and the nuts are undoing. I have never used nuts and washers before and looked on google and I think maybe I need a spring washer. But if so how many. Can you please give me some help . The rest is perfect and it works just like yours except for that one problem. Thanks, laurie
@that1guydoesthings
Жыл бұрын
@laurie bareham the nuts holding the rod in place are Nylocks. It is a nut w a small nylon insert to keep them in place on the rod. The two clamping the cam are regular. It's a bit of a dance getting them on, goes quicker if you can use the drill to turn the rod while holding the nut with a wrench or other tool. It's obvious I need to do a better job in my videos on the details. If you need I could make a video later. Thank you.
@wingnutbert96859 ай бұрын
The drill is much better than the Sawzall. Way less strain on the tool. I can't see a Sawzall lasting long at all.
@that1guydoesthings
7 ай бұрын
I started w a jig saw to operate the table, it was not happy lol.
@shaung1100 Жыл бұрын
A small vibrator motor would do the job better for sure
@that1guydoesthings
Жыл бұрын
Not according to my testing, but thank you.
@billmoulton5028 Жыл бұрын
Do you have any plans for sale
@that1guydoesthings
Жыл бұрын
Negative, but I will be doing a build video since people are asking. Thank you.
Пікірлер: 103
That are the heights on the front and back legs. Sweet built! This is the best design I have found anywhere!! Thank you for sharing!
@that1guydoesthings
Жыл бұрын
Front are 16", rear 24". Thank you very much, I appreciate it!
Great idea on that ''holesaw CAM''. Never thought of that, Thanks
@that1guydoesthings
Жыл бұрын
Thanks for watching!
Thank you for posting this video. Nice job. I've been building mine, in my head, for several years. It has many elements similar to yours. A cheap drill is absolutely the way to go. For that matter, I plan to keep a new spare(or two) on hand at all times.
@that1guydoesthings
9 ай бұрын
I first had a jig saw moving the table. If I could've found a way to tame it, I think I would have stuck with it. It was just too inconsistent. Thank you for your input, and good luck on yours!
Nice video indeed. Must give it a go. Thank you 🙋♂️
I love this build. I'm a great fan of all DIY amateur engineering.
@that1guydoesthings
Жыл бұрын
Thank you Chris. I'm the same, it's fun to see creative minds solve problems.
Fantastic idea - and you’re right, those machines are hideously expensive. Would love to see some plans, even if they cost a few bucks.
@that1guydoesthings
9 ай бұрын
Will have to see if I can draw up some simple plans. Thank you.
I absolutely love this. I was planning on building something similar this summer, but this is basic excellence and a step above what I was thinking. Well done sir!
@that1guydoesthings
Жыл бұрын
I'm glad the video is helping. Thanks for watching and the sub!
@ricksteen935
Жыл бұрын
This by far simplifies the process SO MUCH. I’ve modified my own design numerous times as it slides back an forth, but the bump action looks like it deals with wet castings extremely well!!! Thanks for getting my brain unstuck.
Love the whole set-up 😮 my first worms are already on the way, im way too excited) much love from Ukraine, you are an inspiration ❤
@that1guydoesthings
4 ай бұрын
Thank you so much! Good luck on your worm journey! Any questions, feel free to ask.
Very nice setup. Well thought out and it will save hours of work for others.
@that1guydoesthings
Жыл бұрын
Thank you.
Thanks for the look into your system
@that1guydoesthings
Жыл бұрын
Thanks for watching!
Very clever man I think I will give this build a try!!!
@that1guydoesthings
Жыл бұрын
That's what I want to hear! Thank you and feel free to reach out with question.
Very interesting design!
This is great! I was thinking of building a similar design but using vibration… an easy hack you can test for noise reduction, try some thin weather strips on the underside of the bracket so it’s not metal on metal.. Might also try the same to dampen the wood on wood noise. Again, great work! I appreciate the video!
@that1guydoesthings
9 ай бұрын
Thank you, I appreciate the feedback. The more noise reduction I've tested, the less effective the "thump" is to clear the screens and keep things moving. I suspect I could play with the angle more to compensate.
@sparksmcgee6641
2 ай бұрын
Yeah, vibration motors are only $20-$30. I happen to have one and a whole lot of drills.
You could sell the plans for this very easily
@that1guydoesthings
9 ай бұрын
I am learning CAD, hopefully I can post some soon. Thank you!
@justagirlsd3000
2 ай бұрын
@@that1guydoesthingshave you posted the plans?
Hope to see more videos from you in the future! I'm not ready to build a power sifter. I'm just a home vermicomposter so I don't mind if my castings aren't sifted. But this is an impressive design. ~ Sandra
@that1guydoesthings
9 ай бұрын
Thank you! I will try to post more soon. I have a couple things I'd like to share with the community.
Ingenious my friend! Thank you.
@that1guydoesthings
5 ай бұрын
Thank you!
great build! could you elaborate on why the screen with the round holes is used for ENCs?
Great idea, thx for sharing.
Nice rig 👍🏻 Thanks for the demo
@that1guydoesthings
Жыл бұрын
I've watched hours of your videos! Thank you for watching and putting out the videos you do! They were quite helpful when I started.
@A-V
Жыл бұрын
I wondered if your cam was just a circle with a hole offset from the center, or perhaps something more fancy... like an egg-shapes profile sorta like you see in automobile camshafts, or perhaps even a seashell shaped profile that would cause a more sudden jolting action. Looks to me like the simple approach gave you some great results 👍🏻
Great job.😎
@that1guydoesthings
Жыл бұрын
Thanks AJ!
Wow great design! I was looking at ways to change my sifter from a recip saw to a drill. I might try this out!
@that1guydoesthings
Жыл бұрын
Thank you! I remember watching yours when brainstorming for mine!
@ricksteen935
Жыл бұрын
Dude!!!!! This could not have come at a better time. Had a fire do have to rebuild from the ground up, house and wormry. The original sifter that I built was ok base on a reciprocal saw and never worked as envisioned. This has serious prospects!!!! Thanks
@WorldComposting
Жыл бұрын
@@that1guydoesthings Glad to hear!
Great job!!
@that1guydoesthings
Жыл бұрын
Thank you!
You can probably put a dimmer switch on the drill to control the speed more easily. Great build I was looking for hardware cloth today to build a sifter
@that1guydoesthings
Жыл бұрын
Thank you. A dimmer switch is a good idea. I will incorporate at some point.
@wingnutbert9685
9 ай бұрын
@@that1guydoesthings I'd caution that idea. The drill is designed to run on the full 110/115v AC. Choking down the volt supply could do damage to the drill.
Great work. Looks like it would work as a gold drywasher.
@that1guydoesthings
Жыл бұрын
Thank you. My father in law uses it for his artifact hunting hobby, he seems to like it.
Thank you for this honestly
@that1guydoesthings
Жыл бұрын
Thanks for watching and the comment, makes making the videos worth it to know they are helping.
Haha I love it. Nice invention
@that1guydoesthings
9 ай бұрын
Thank you!
Outstanding
@that1guydoesthings
9 ай бұрын
Thank you!
Very cool idea, if i ever start making enough of the stuff I'll give this a try. The one looked up was very very expensive. Sub for future worm content
@that1guydoesthings
9 ай бұрын
Thank you very much!
Nice work
@that1guydoesthings
5 ай бұрын
Thank you!
Would love to see a plan/ design of this looks great I just started with red wrigglers and was think of doing something like but yours is far better than what I thought of
@that1guydoesthings
9 ай бұрын
Thank you! Will see if I can get some plans drawn up.
@Rews-fishshed
9 ай бұрын
@@that1guydoesthings thank you I’d be very interested in that
Nice!
@that1guydoesthings
Жыл бұрын
Thanks!
cool man!
@that1guydoesthings
Жыл бұрын
Thank you!
This is great, need some dimensions or sketch, my brain is already working on noise reduction and I think I have it with a simple modification.
@that1guydoesthings
Жыл бұрын
Thanks Frank. I had springs and rubber bumpers that made it very quite, found the thud helps knock material thru the screens and prevents plugging. I will make a better build video soon w more dimensions.
Genius!
@that1guydoesthings
Жыл бұрын
Thank you!
Genius
Interesting way to get multiple sizes in one pass.
@that1guydoesthings
5 ай бұрын
It does the trick! Thanks for watching!
👍👍👍
@that1guydoesthings
Жыл бұрын
Thank you!
How think was the metal you chose to work with I'm thinking of trying to use 29 gauge flashing. I've never worked with metal couldn't find any videos going over the basics but I think it shouldn't be to tricky . 😅
@that1guydoesthings
Жыл бұрын
24 guage sheet metal. Making some cardboard templates may save you some headache. Thanks for watching!
Dude, where did you find that 3/16” screen in that length???
@that1guydoesthings
7 ай бұрын
Menards, but most local hardware stores carry 24"×24" pieces. Notice the seam, I had to use the off cut to get the length I needed. Turned out the off cut was almost exactly what I needed to make up the difference.
@ricksteen935
7 ай бұрын
@@that1guydoesthings Thank you most kindly!
respect
@that1guydoesthings
Жыл бұрын
I Appreciate it!
So the rod is straight into the drill?
@that1guydoesthings
4 ай бұрын
Yes. If you have trouble getting the drill to tighten onto the threaded rod tight enough, you can grind two flat spots on the threaded rod for a better bite.
cool
@that1guydoesthings
5 ай бұрын
Thank you!
Gidday mate, I am on my way to the hardware store for most of the materials, but wanted to ask you which drill to buy? I think you said an industrial one, but not sure which. Maybe you could tell me your drill and I will just get that one. Thanks in advance
@that1guydoesthings
Жыл бұрын
Mine is a Skil brand. If you are getting one dedicated for the job I would get a cheap corded drill. If you intend to use it for more than the sifter I would spend a little more and get battery powered. Maybe ask some friends, good chance someone has an old one laying around you could try out.
@lauriebareham4200
Жыл бұрын
@@that1guydoesthings Well I copied everything you did and made the hole thing including the sifting trays. However I have run into a problem. I have put 5 nuts and 5 washers on in total, but when the drill is turned on every things works perfectly for a minute and then I notice that the rod is moving down away from the drill and the nuts are undoing. I have never used nuts and washers before and looked on google and I think maybe I need a spring washer. But if so how many. Can you please give me some help . The rest is perfect and it works just like yours except for that one problem. Thanks, laurie
@that1guydoesthings
Жыл бұрын
@laurie bareham the nuts holding the rod in place are Nylocks. It is a nut w a small nylon insert to keep them in place on the rod. The two clamping the cam are regular. It's a bit of a dance getting them on, goes quicker if you can use the drill to turn the rod while holding the nut with a wrench or other tool. It's obvious I need to do a better job in my videos on the details. If you need I could make a video later. Thank you.
The drill is much better than the Sawzall. Way less strain on the tool. I can't see a Sawzall lasting long at all.
@that1guydoesthings
7 ай бұрын
I started w a jig saw to operate the table, it was not happy lol.
A small vibrator motor would do the job better for sure
@that1guydoesthings
Жыл бұрын
Not according to my testing, but thank you.
Do you have any plans for sale
@that1guydoesthings
Жыл бұрын
Negative, but I will be doing a build video since people are asking. Thank you.
Make me one ???
@that1guydoesthings
5 ай бұрын
Sure, where am I shipping it?
Genius!
@that1guydoesthings
Жыл бұрын
Thanks Jim!