DIY mmWave Presence Detector
Тәжірибелік нұсқаулар және стиль
DIY mmWave Presence Detector
DIY mmWave Presence detector with a ESP32 and a LD2450
#ad Thanks to PCBWay for making my beautiful design possible !! (www.pcbway.com)
This time a video where we create a presence detector to help around in the house, I will use these to assist and run automations based on presence in the room or based on presence in specific locations of the room.
The automations I used in this video are easily replicated, but if you have any questions please let me know.I use notify as action to get a glimpse of the response times but you can use any actions you want.
hope you like the video, if you do pls like and subscribe or support me on patreon so i can continue in making these video's.
Links:
Link to Updater box trays: makerworld.com/en/models/4679...
HLK Radar Tool:
Google play store: play.google.com/store/apps/de...
Apple Store: apps.apple.com/us/app/hlkrada...
Bin Files: / diy-mmwave-106417982
Plotly Graph Code: / diy-mmwave-106417982
Esp32: s.click.aliexpress.com/e/_DD9...
LD2450: s.click.aliexpress.com/e/_DB0...
Pins:
ESP32 HLK-LD2450
VIN 5v
TX2 RX
RX2 TX
GND GND
Support me:
Patreon: / lickylauda
Paypal: paypal.me/lickylauda
Buy me a coffee: www.buymeacoffee.com/lickylauda
If you want to support me in any other way, please reach out to me by mail.
#PCBWay
Chapters:
0:00 intro
0:10 sponsor
0:13 celebrate
0:21 let’s get started
1:05 test setup
1:35 install ESPHome firmware
1:53 add to home assistant
2:46 add plotly graph card
4:42 change orientation
4:57 design pcb
5:35 sponsor
5:50 review the pcb
6:25 printing the case
7:05 assembly time
9:14 zone setup
9:56 create automation (simple)
10:31 test automation
10:49 adjust the zones
11:16 create automation (more advanced)
15:11 test automation
15:28 patrons
15:36 credits
Пікірлер: 13
set trigger id's helps shorten the automation setup
Mooi gedaan! Wilde dit al eens proberen. Subscribed.
Thanks! Very helpful video! I have the parts lying around for a couple of months now but hadn't found a clear tutorial such as yours
I didn't find the bin's link send to the graph code. Or i miss something ?
@licky-lauda
Ай бұрын
It’s here : www.patreon.com/posts/diy-mmwave-106417982
@kojakjako9986
Ай бұрын
@@licky-lauda yes but the files to flash the esp32 ? I just see the Plotly Graph Card Code.
@licky-lauda
Ай бұрын
@@kojakjako9986 i re uploaded them. you can find them now.
Very cool, how many people can it track at the same time?
@licky-lauda
Ай бұрын
Up to 3
@sentyuk5322
Ай бұрын
@@licky-lauda that’s fantastic, I’ve seen the cheap ready made ones but only did 1. Others required lots of programming when DIY, this just seemed so simple 👍
@licky-lauda
Ай бұрын
@@sentyuk5322 if you follow the directions in the first part of the video it is not that hard. The files are available on my Patreon page. you can access them as a free member.
your video quality presentation is so amazing but do you know why your video is not getting the expected views? Your channel needs some updates to increase the view
@licky-lauda
Ай бұрын
I will try to put out more, or I can make different parts. Thanks for your input.