Very good DIY video. One important part missed though, you should paint the glass with a window seal primer before putting your bonding sealant on and also prime the other surface (hard top). The primer etched so makes sure the sealant doesn’t fail.

Very helpful how-to. My hardtop needs a lot of halp, so planning to restore as soon as I can. Thanks!

Thanks for not glossing over the moulding install like everyone else.

Thank yuo Peace Parts, this was the video I'm looking for a while, about how top properly add the rear window sealing, thank you!

Super helpful, thank you.

Thank you for the awesome information! 🙏

hey man i got a question super late my hardtop is fine besides the rear molding do i have remove the window to replace the outside trim molding ?

thank you so helpful!!!!!

That's pretty neat.

@PeaceParts

5 жыл бұрын

YES!!! Thanks! Lol

This video is a big help. Thank you! I just want to replace my old cracked "NAY1-63-930 - Reveal Molding". Does the outer trip require any adhesive?

@PeaceParts

4 жыл бұрын

I didnt use any in this video, but soon regretted it. Later I used some general construction adhesive and it worked well.

@agodeko01

4 жыл бұрын

@@PeaceParts Mahalo for a very fast reply. You are awesome. When I removed an old strip, it did not look like it had an adhesive so I was wondering how it was staying.

@PeaceParts

4 жыл бұрын

@@agodeko01 yeah, I dont claim to be a professional window installer, but I believe if I was, I would use some of the windo-weld in the crevice of the trim to hold it on. Since I would already heave a tube of that being used for the window. I believe some sort of adhesive is the way to go, for sure.

Cool vid, thanks, Peace Parts. Is it absolutely necessary to replace with a new exterior trim mould? You showed it fitted easily, which should make it also easy to remove, and not damage, would you think? (There is a shortage in my country and Mazda are presently charging a fortune for it)

@PeaceParts

Жыл бұрын

No its not absolutely necessary. I will say though, it did not hold up the first time I installed it in this video. I ended up going back with some general construction adhesive and gluing it on for good. There is a possibility your trim will come off just fine and you could reuse it.

Nice vid bro 😎 so you put the black silicone on the hardtop too before putting the window down ?

@PeaceParts

2 жыл бұрын

No, just on the glass.

i need that outer seal, what website did you get it because i'm not finding it.

@BrettHart27

Жыл бұрын

See answer above

Great diy video. Are you able to provide part numbers for the urethane and seals?

@PeaceParts

5 жыл бұрын

NA01-63-895A - Weatherstrip NAY1-63-930 - Reveal Molding 08609 - 3M Windo Weld Urethane Those should be the only seals and parts you need.

@miltoncerda7476

5 жыл бұрын

I was able to locate the parts with a little research but thanks for the reply!

Next time you make a DIY, try exclude the pop up text or let them show for a longer duration. I had to go back and rewind after I saw it flash. Wasn't sure if they were "oh, btw" tips or what. They weren't.

Hello I need glass for my hard top were I can take the glass?

@PeaceParts

3 жыл бұрын

They are very hard to find used and I dont believe they still sell them new. Your best bet is to replace it with lexan

Is it possible to replace the outer mold without glass removal?

@PeaceParts

2 жыл бұрын

Yes absolutely! I would recommend using some construction adhesive to hold it in place

I just got the glass seal, so does it just click into the edge of the glass without needing adhesive or sealant?

@PeaceParts

3 жыл бұрын

I believe the pros squirt some of the windoweld into the channel and stick it to the glass. I did not do that and the seal blew off. I eventually came back with a new seal and glued it in with some generic construction adhesive. Super solid now!

@lewisfoster4584

3 жыл бұрын

I thought it might do that as it doesn't really 'click' into place it just sits on the edge of the glass

@dominicmorris819

2 жыл бұрын

@@PeaceParts will that seal then need replacing when it is removed next time, or will it come away and be reusable? The outer seal with the "clip" that you also purchased separately in referring to

Is it possible to replace that seal around the window with the glass still in?

@PeaceParts

3 жыл бұрын

The trim around the outside, yes absolutely. The foam seal around the inside of the window, no.

@filmkid1080

3 жыл бұрын

Peace Parts thanks 🙏🏻

I used some clear silicone on the reveal molding every 6 inches or so I guess I'll see how it worked when I get home

@PeaceParts

Жыл бұрын

Later on, I ended up using a construction adhesive to hold the trim on and it has held phenomenally. That was actually at the recommendation of a local glass guy.

@jakehamilton5894

Жыл бұрын

@@PeaceParts any luck on the corners at all they still want to lift so I put tape and extra adhesive

@PeaceParts

Жыл бұрын

@@jakehamilton5894 no issues with the corners once I put the construction adhesive all along the groove and then used tape and things to hold it down while it set overnight.

@jakehamilton5894

Жыл бұрын

@@PeaceParts that's good at least

where did you get the seal/trim?

@PeaceParts

3 жыл бұрын

I ordered it from a Mazda dealership online. The part numbers are listed in another reply below.

@AEGYOKILLER

3 жыл бұрын

@@PeaceParts Thanks!

Where’d you get the hardtop & the window ?

@PeaceParts

5 жыл бұрын

I bought them from the same person who had taken the window out to repaint the top (not necessary in my opinion). So all I had to do was order the seals and reinstall it. I believe you can get a new piece of glass from Mazda dealership, but it's going to be pricey!

@kendrickamy7731

5 жыл бұрын

Peace Parts oem top ? Sorry if I’m asking a lot

@PeaceParts

5 жыл бұрын

@@kendrickamy7731 Yes it is an OEM top with Headliner and defrost. I believe it is original to a 1993 Miata (Sinamon) that you will see in my other videos.

How did you pull it out tho ha

@PeaceParts

Ай бұрын

undo the bolts and then cut the sealant with a razor or windsheild cutting tool and then the glass will come out.

@daylindrake768

Ай бұрын

@@PeaceParts yeah im affraid of braking with way its shaped is it pretty thick and workable

Where does one but oem glass for a hard top?

@PeaceParts

3 жыл бұрын

Very good question. I was lucky enough to get my top with the oem glass, it just had been pulled apart to paint. Therefore I didn't actually have to buy it. I woukd start with a mazda dealership and then try searching part numbers online to see if its available anywhere.

Music is a no go

Miatas are always wet inside lol

I literally cannot find the window seal...where the fuck do you get it??

Annoying music playing while you’re talking, can’t finish watching.