No video
DIY Making an Outdoor Kitchen 2 second step
This video is about Me framing the outdoor kitchen , and hanging the cement board .
to support this channel go to www.bigtoolrac...
There you can find the latest out door tractor equipment attachments .
Use the promo code Phil5 for 5% discount on your entire order .
Пікірлер: 28
Excelente trabalho irmão como sempre. espero que sempre tenhamos vídeos seus aí pra curtir abraço👏👏👏👏👏
Cedar framing, treated, or just standard pine? I am in a wet climate area and leaning towards pressure treated but it's more expensive than Steel right now so also considering that. Thoughts?
Is it necessary to pour footings? I have 5” patio, was going to do 10’ island with air stone and either granite or concrete counter tops. The existing patio does have rebar. Any feedback would be much appreciated. Great video as well.
@philipedocarmo
3 жыл бұрын
Do it think you need anything other the weight of the structure itself ! I only did in this case cause it was no the virgin ground , and I needed a base to set that on , cheers
Awesome job! What size were those walls so you can use one board for both cuts?
@philipedocarmo
3 жыл бұрын
3’ width and 2’ overhang . Cheers
Great video! How did you do the drain for the sink? French drain, tied to the house, or something else?
@philipedocarmo
4 жыл бұрын
marangh1primo great question ! I ended up doing and dry well drain since is just clean water they use that for . Rinse and wash very little . It exits begin the stone wall . Cheers
Kool
Caraca muleque , tu tá igual o Rei das Serpentes . Até cobra agora tem nos vídeos 😬
How do you attach the wood frame to the concrete?
@philipedocarmo
3 жыл бұрын
Anchor bolts and tap cons blue concrete screws . Cheers
I was wondering what your voice may have sounded like. Got to hear it when you were using the phone in your video. Definitely not the voice that I was expecting you to have.
Aqui no nordeste do Brasil damos à essa cobra o nome de corre campo
1/2” backer board ?
@philipedocarmo
4 жыл бұрын
5/8 durock , cement board , and metal lath thats the way to go . cheers
@jarredleonguerrero328
4 жыл бұрын
What kind of blade did you use on circular saw and recip saw to cut the boards? And was thin set used later for the joints?
@cenzo152000
4 жыл бұрын
i Used a utility knife to score the board. Snapped them just fine. The set in joints and seems.
Snake!
is wood a fire danger
@philipedocarmo
4 жыл бұрын
mike n not if you it properly , insulating the inside of the grill with cement board as well . Cheers
@aprilbaker22700
3 жыл бұрын
@@philipedocarmo use cement board/durock inside and out around the grill drop in area and I should be fine ?
@philipedocarmo
3 жыл бұрын
@@aprilbaker22700 as long as you protected the area with cement board you will be fine ! Cheers
Must have great health insurance to cut all that stuff with zero protection.