No video
DIY Log Splitter Part 3
How I built my DIY hydraulic log splitter in a weekend from scrap metal, part 3.
Hydraulic cylinder (80x800x1100):
Piston rod Ø (mm): 50mm
Stroke (mm): 800mm
DIY Log Splitter Part 1: • DIY Log Splitter Part 1
DIY Log Splitter Part 2: • DIY Log Splitter Part 2
DIY Log Splitter Part 3: • DIY Log Splitter Part 3
Kverneland Hydrein Plow Restoration Part 1: • Kverneland Hydrein Plo...
-
youtube: / hrz4x4
facebook: / hrz4x4
twitter: / hrz4x4
-
hrz4x4, 2019
Пікірлер: 56
That's too damn cool. I'd say this man has done his fair share of metal work. I read a comment that says "simple yet efficient"....I just have to point out the fact that after watching all 3 videos this felluh made, it takes a whole lot of skill, talent, and patience to makes this whole procedure look "simple" and "efficient"... Awesome work, man thanks for sharing.
@hrz4x4
Жыл бұрын
Thanks!
@ukyawnaingoo1952
Жыл бұрын
000
I was a bit worried with a large number of fake reviews but I am very pleased with the results. Bit of background, kzread.infoUgkxmKn8dCAXovWn8_cLYoosGLVrVrpwlIMc I need to split approximately 1.5 cords of wood and didn't feel like destroying my back. I purchased this anticipating to have a few issues splitting wood but have only come across a few logs of elm where the stringy nature of elm made it more difficult to split. Overall its not a necessarily fast process but it also isn't a very arduous one either. I came and went fairly often to do different tasks but once I stayed and got into a system I could easily split my pieces in a fairly timely manner.
Сколько русско-говорящих его смотрит )) класс !👍
Теперь к новым уголкам вдоль колуна нужно прикрепить пластины под 45 градусов, получится типа корыта и полено не прийдётся каждый раз центровать.
You have the right idea with the blades beimg staggered, only doing 1 split at a time. It is suprising how many factory built wedges have all the cutting edges in a line. It's alot easier splitting with them set up like yours.
Very smart design to have the floor move with the cylinder!
@manuelherrera7082
3 жыл бұрын
Si
Na tą dźwignię nakręć jakąś kulę lub uchwyt w kształcie trójkąta zrób zanim oko sobie tym wyjmiesz 😅
Давно вас смотрю. Молодцы! Чудо люди. Что за страна вы
Привет, молодец что зря говорить. 👍👍👍
nice video, the shepherd is also beautiful.
Hello from northern Greece, I own 4 Belarus tractors... Nice patent the log splitter... Keep going on with your magnificent videos....
@hrz4x4
5 жыл бұрын
Greetings to Greece. Wow 4 tractors, that's really nice :) Thanks for the feedback. During research (in youtube) I saw some good ideas from Greece guys who had made their own wood splitters.
@LOKgr
5 жыл бұрын
@@hrz4x4 Hahah... For these type of patents we are crazy....! I own 2 red 82's, a blue 92 hp 1995 model that has a centrifugal fuel pump like the t40 not a classic fuel pump like all Belarus, that enables it to reach 2700 rpm or more and on 2016 I bough a new 1025.4... And I didn't see many Belarus having a centrifugal fuel pump only some 1221.... Have a nice day!!!
works ok. I thought that the blade is to thin to split it to the end but you can put next log in and finish it so for such long pieces of wood it works really well. I use fiskars splitting axe and split firewood by hand. Logs only ~40cm long and not a lot of thick wood, so not to hard to split them by hand.
@hrz4x4
5 жыл бұрын
It's more like cutting than splitting. I used to split all my wood with axes - started with simple tools many years ago. The difference is that in the evening you are not so tired with the hydraulic splitter. I would recommend a good axe for splitting - something from our grandfathers time or a new blacksmith axe. Axes are very different, I used to split with the brand you mentioned.. But when I switched over to blacksmith axe it's like from another world - when the blade is well balanced it makes all the difference.
Excellent work.
Surprised you have not mounted the splitter on 3 point linkage! That would save a lot of bending to pick up logs.
Odlično, i dobrog partnera imaš!
progetto veramente interessante!!!!! buon lavoro
@hrz4x4
3 жыл бұрын
Grazie
I have a log splitter
Классная вещь!
Bravo
Where you used so large firewood?
@hrz4x4
5 жыл бұрын
I have a manual solid wood boiler indoors. It's a big cast iron boiler and takes up to ~90cm wood in length. Viadrus U22-10 is the type of boiler I have. Link: www.viadrus.cz/manual-solid-fuel-boilers/hercules-u22-d-28-en18.html?lang=en
классный агрегат!!!
Внезапно 20к подписчиков :)
@hrz4x4
5 жыл бұрын
youtube magic :)
Ottimo con poco ottenuto tanto
Magnífico compañero
Ваш трактор т 40 теперь совсем стоит без дела, хочется и его увидеть в работе
@hrz4x4
5 жыл бұрын
Я иногда использую это также для транспорта. Но не тогда, когда очень холодно.
@Evgenblagorodny
5 жыл бұрын
Пожалуйста сделайте видео с ним
Good morning
Скажите пожалуйста какой лучше акуммлятор брат для мтз 82 что и зимой заводил и летом)??
@hrz4x4
5 жыл бұрын
Varta Promotive 180-220A -> kzread.info/dash/bejne/dZyi2rSiYpXWctY.html
Изи👍👍👍
Молодцы.
Зачёт 👍. Не помешало бы сделать стойки и поднять на 50 см. Спина скажет Спасибо 😁👍
@hrz4x4
3 жыл бұрын
Да. это прототип.
Лайк👍!А где кот?)))
@hrz4x4
5 жыл бұрын
Thanks. кот отдыхает в доме :)
Напиши пожалуйста размеры цилиндра вместо центральной тяги
@hrz4x4
5 жыл бұрын
Информация о цилиндре доступна здесь: kzread.info/dash/bejne/pJp_zLyxnbK-idI.html
Ei Hyvä!
see silindri liigutamis süsteem on küll kaval, kuid samas on seda tüütu kogu aeg käes hoida või otsida seda toru käega taga. ise oleks teinud mingise eraldi jagaja kuskile sinna lõhkuja peale ja siis paned seest kangi ühte asendisse ja siis väljast jagajast reguleerid kumba pidi silinder liigub. seismise asendi peal peaks siis õli tagasivoolu jooksma jagajast. muidu vägev projekt
@hrz4x4
5 жыл бұрын
Idee oli algatuseks teha väga lihtne süsteem olemasolevatest asjadest. Alati saab kallimaks ja keerulisemaks teha. Viimase versioonina on ka päris mugav seda kangi kasutada, russi enda jagaja on muidugi ebatäpne ja lisaks veel see ujuvasend..
@matufujiwara7493
5 жыл бұрын
@@hrz4x4 üks asi mida ma pole leidnud on ujuvasend. mis asendis ujuvasend on? oleks endal suureks abiks teada
@hrz4x4
5 жыл бұрын
kang üles ja siis üle selle koha, kus ta silindrit liigutab. lükata võib vist isegi väikese jõuga, siis need kõik kolm kontuuri peaksid ujuvasse minema selle tavalise jagajaga.
👌👌👌
Надо доварить два бортика чтобы бревно набок не скатовалось
Ну вот другое дело))) +
J