I was inspired with you bench press machine and built one after a week of buying necessary parts and another week of putting your technical directions to work. I couldn't reach your level of finesse and aesthetic outlook, but I am quite satisfied with that. You speak humbly and teach every detail with care which is why I got to like you and your channel much. Keep it up!

@MattLees-Nunan

2 жыл бұрын

Thank you so much. So very kind of you to say💓 I'm glad the video has come in handy for you😊

@zanegriggs5166

Жыл бұрын

How did you attach the circular bar to the sliding rails? Weld?

This is awesome!

This is badass, these machines retail for so much money. Great job man

@MattLees-Nunan

Жыл бұрын

Haha cheers! It was desperate times😄

Thank you for these videos, been watching all of them. Going to make the leg curl/extension machine on monday. Hello from Belgium !!!!!!

@MattLees-Nunan

3 жыл бұрын

Fantastic! I look forward to hearing how it goes😊

@pretreduchibre

3 жыл бұрын

@@MattLees-Nunan I was wondering, is the adjustable bench you built completly flat ? I can't seem to see it flat on the video.

Love these videos at the moment have just started sourcing the materials to have a go at building the treadmill you made Keep the videos coming. Liked an subbed.

@MattLees-Nunan

3 жыл бұрын

Thank you very much. Glad you like them😊 Let me know if you need any help as you go along👍

My first thought was, “this thing is chinsier than the legs I’m looking to grow.” But you gave me a lot of great ideas. So thank you! I’m going do this with much more bracing, thicker lumber and fabricated metal brackets.

@MattLees-Nunan

4 жыл бұрын

Hahaha I'm glad I could help you out with some ideas! Let me know how you go🙂

@qfloyd25

3 жыл бұрын

Hey did you make yours? Do you mind sharing some pics?

@MattLees-Nunan

3 жыл бұрын

@@qfloyd25 yeah sure! Which sections would you like pics? I will send them to your email👍

@qfloyd25

3 жыл бұрын

@@MattLees-Nunan send to qfloyd25@yahoo.com thanks. Trying to get ideas to make my own

@williamdDF

3 жыл бұрын

kzread.info/dash/bejne/eX2uzq2KoNO2ltI.html

loving these videos mate I've subscribed... a fellow Aussie, living in England.

@MattLees-Nunan

3 жыл бұрын

AWESOME Man! Hope you're well over there🤙

@williamdDF

3 жыл бұрын

kzread.info/dash/bejne/eX2uzq2KoNO2ltI.html

Omg! Your videos are awesome! Tomorrow I'm gonna be doing a bench for lifting weights and it's based on the one you did in a video. I think my next project will be this one, thanks bro. Greetings from Mexico.

@MattLees-Nunan

3 жыл бұрын

Hola hermano!! Gracias😁Que bueno!! Enviarme fotos despues de projecto. Me encanta verlos👌

@mrgallipato96

3 жыл бұрын

@@MattLees-Nunan Claro!! :)

@williamdDF

3 жыл бұрын

kzread.info/dash/bejne/eX2uzq2KoNO2ltI.html

Very nice job!

@MattLees-Nunan

3 жыл бұрын

Cheers!

Vc é o melhor 🔥

good one

Молодец чувак, тоже летом попробую сделать.

@MattLees-Nunan

3 жыл бұрын

Thank you

You re Over the Top

@MattLees-Nunan

6 ай бұрын

I'll take that! Thank you😊

I got a new leg press machine thanks to you

@MattLees-Nunan

3 жыл бұрын

Awesome!!! Do you have instagram and be interested in posting it in a story to me?😊

@alparslanemredurmus7949

3 жыл бұрын

@@MattLees-Nunan I'll post photos soon

@MattLees-Nunan

3 жыл бұрын

@@alparslanemredurmus7949 Brilliant, can't wait!

Beast

Not bad! 👍

@MattLees-Nunan

3 жыл бұрын

Thank you!🙂

How do you connect the galvanized pipe to the slides?

@MattLees-Nunan

Жыл бұрын

Hi! Please send email and I will send a photo!

Not bad. Nice

@MattLees-Nunan

3 жыл бұрын

Will you give it a try do you think?

No entiendo las medidas podrías explicarlas en pulgadas te lo agradecería muchísimo excelente trabajo.

genio total saludos desde argentina

@MattLees-Nunan

3 жыл бұрын

Bueno y gracias😁

How did you connect the bar through the centre of the 40mm box section steal? If you put a bolt thru it surely it will interfere with it sliding up and down????

@MattLees-Nunan

21 күн бұрын

Hi, if you can contact me on instagram or send emai through, I can send you a photo:)

Don't the bolts that are attached through and to the side of each 40mm square tube, grind or impede the smoothness of the sliding action?

@MattLees-Nunan

3 жыл бұрын

No, not one bit actually! That's why they're on there to act as a guide. You will see it on the photo I sent you. It will make sense🙂 Just make sure to put dry lubricant on machine every so often👍

I got a question the 30mm and 40mm would that be like 1in and 1 1/2 for the sqaure metal pipes so if I took like a 1in and ran a 1 & 1/2in over it would that work

@MattLees-Nunan

3 жыл бұрын

Yes, definitely!

No. 3 METRES long. A METER is a measuring instrument. Why can't KZread spell the subtitles in English properly? US Engrish?

@MattLees-Nunan

7 ай бұрын

I no how frustrating that is! Hopefully it's something their working on🤞

Genioooo

How do you have the weight poll affixed to the tubular steel so that is can still slide.

@MattLees-Nunan

3 жыл бұрын

Will send you a photo!😊

Sir scque or wood ka thikness botau

how did you turn the round iron into the square iron? congratulations for the channel !!!

@MattLees-Nunan

2 жыл бұрын

Thank you friend. I bought the round metal separately😊

Hi Matt can you please explain how the leg press will work if there is a bolt securing the 7 foot pipe to both pieces of metal

@MattLees-Nunan

2 жыл бұрын

Hi Marmo😊 Sure! Are you able to send me your email address please? Or if you have instagram a DM @mattnunan

@doctorjohnson6161

2 жыл бұрын

@@MattLees-Nunan Yes .. alphamarkie

hello...great job, but i dont understand how you fix the pipe?

@MattLees-Nunan

Жыл бұрын

Hi Mario, thank you for watching! If you have instagram or an email, I can send you a photo?

Great job. One question how do you attach the pipe to hold the weights to sliding sleeve? On video looks like you drill a hole to hold pipe but how does it slide up and down? Ty

@MattLees-Nunan

3 жыл бұрын

Will send you an email!😊

@stephen08ism

3 жыл бұрын

I have the same question, can you send it to to as well please. Thanks

@MattLees-Nunan

2 жыл бұрын

Hi Steve, do you have instagram or an email address for which I could send you a photo?

@MattLees-Nunan

2 жыл бұрын

Hi! Do you have instagram or an email address so I can send you the photo?😊

I'm not thrilled by your track system but it's still a decent design. *On the other hand, high reps or doing just 1 leg.* I'm going to build something similar but more compact. Everyone goes so damn big with them.

@MattLees-Nunan

Жыл бұрын

Would love to see what you come up with! Send me a photo if you like after completion👍 @mattnunan

Muito obrigado por ensinar. Vou fazer o meu obrigado

@MattLees-Nunan

Жыл бұрын

Gracias!

Sorry, one more question. If you put your foot very high on the top edge of the foot plate, does it still go up smoothly or does it pinch on the bottom square tube and get stuck? Thanks again.

@MattLees-Nunan

3 жыл бұрын

No need to apologise! I love the questions🙂 If you put the extra bit of 2×4 in place then no it won't. Once again that photo I sent you will hopefully clarify things a bit👊

@gio144

3 жыл бұрын

Thanks for all your replies, Matt. I appreciate them. Have a safe & blissful Thanksgiving. Best wishes to you and the family, peace.

@MattLees-Nunan

3 жыл бұрын

@@gio144 Thank you so much, and I wish the same to you my friend😍

you didnt mention what is the sizes off the wood pines that you cutting

@MattLees-Nunan

3 жыл бұрын

Hi😊 I believe all materials will be in the description. Let me know if that helps😊

1:55 if i cut off my legs then why would i need a leg press😂😂😂

Hi was wondering how you attached the bar to still make it move freely

@MattLees-Nunan

3 жыл бұрын

Hi! Great question, could you please send me your email and I can forward you the photo😊

@williamdDF

3 жыл бұрын

kzread.info/dash/bejne/eX2uzq2KoNO2ltI.html

Awesome! What type of metal are the pipes ??

@MattLees-Nunan

3 жыл бұрын

They are galvanised. The pipe I got was pre-painted black, but it doesn't need to be.

cool, and how did you fixed the round iron into the square iron?

@MattLees-Nunan

2 жыл бұрын

I will send you a picture! What's your email bro?

@d9pe1

Жыл бұрын

Dou you maybe have a Link for The Pictures?

If you don’t mind me asking how much did this cost you looking to do this also thank you !

@MattLees-Nunan

2 жыл бұрын

Awesome! It costs around about $180 Australian to make😊

Good day . how did you connect the rod to the leg press in the video it's not good to see thank you

@MattLees-Nunan

2 жыл бұрын

Hi! What is your email address? I can send you a photo😊

@dominikizdinsky8414

2 жыл бұрын

picasso927@azet.sk email address thank you 🙏💪🏼

How much weight can you lift with this leg press? Thanks!

@MattLees-Nunan

Жыл бұрын

I've had 280kg on this🙌

How did you connect your pipe onto your sliding metal?

@MattLees-Nunan

3 жыл бұрын

Hi Tamara! So the 40mm bit of metal which slides over the 30mm bit of metal has 2 x 6mm x 65mm bolts attatching it to one side. Let me know if this helps🙂

@tamarachumbley8722

3 жыл бұрын

Could you please email me the picture of the cylinder bar attached to the sliding bar tamarachumbley78@gmail.com

I was wondering how you attach the bar to the rhs sliders.

@MattLees-Nunan

3 жыл бұрын

No worries brother! What's your email and I'll send a photo😉

@lukeroehrborn9115

3 жыл бұрын

@@MattLees-Nunan lrroehrborn@gmail.com

@MattLees-Nunan

3 жыл бұрын

All done! Let me know if you need anymore help😊

@zanegriggs5166

Жыл бұрын

Can you send this to me too?

Matt great channel great information I am going to build your leg press machine but I do have A question how did you connect the bar which holds the weights to the larger diameter square that slides up and down did you weld a piece in place or did you use a mechanical connection thank you

@MattLees-Nunan

3 жыл бұрын

No worries! What is your email and I can send you a photo😊

How much weight have you slapped onto this?

@MattLees-Nunan

3 жыл бұрын

The photo shows 100kg but I've had 280kg on there. See photo on my instagram page @mattnunan👍

love the design and everything bro, just wondering bow you attached the 2.4m bar to the rhs sliders? btw wanting to make one.

@MattLees-Nunan

3 жыл бұрын

Thank you for contacting me on instagram! Look forward to seeing the end product😍

@williamdDF

3 жыл бұрын

kzread.info/dash/bejne/eX2uzq2KoNO2ltI.html

I like that you are creative in DIY. Do you think it is possible for me to make a DIY adductor and abductor at home. My wife wants me to make here some since I was able to make this leg press for her with he help of your knowledge and videos.

@MattLees-Nunan

3 жыл бұрын

That's so good that you made her a leg press machine!! Does she use it and love it?😁 Adductor/Abductor....Well if you can build a leg press my friend, then I believe you have the ability to make this. Just see yourself as being a creator, make a plan and go for it✊

Cómo atoró el tubo al cuadrado que baja y sube???

@MattLees-Nunan

2 жыл бұрын

Disculpeme pero no entiendo la pregunta😬 en englis por favor?

I am not understanding how you are fastening the bar to the outer short square tubing.

@MattLees-Nunan

3 жыл бұрын

Sure! What's your email and I can send you a photo of the attachment😊

@rickclark831

3 жыл бұрын

clark_rg_2@yahoo.com and thank you so much!

@MattLees-Nunan

3 жыл бұрын

Done!😊

Nice job👍

@MattLees-Nunan

2 жыл бұрын

Thank you😊

How much weight could this hold if you had to guess?

@MattLees-Nunan

4 жыл бұрын

I had 160kg on there the other day with no problem at all🙂

@MattLees-Nunan

4 жыл бұрын

I suppose 200kg

What is the height of the machine?

@MattLees-Nunan

3 жыл бұрын

1070mm

Whats is the measurements of this leg press machine because its looks amazing bro..?

@MattLees-Nunan

3 жыл бұрын

Thank you brother! The measurements and materials are in the description, and the photo at the start of the video also contains measurements😊

@Fitnessaddict1

3 жыл бұрын

@@MattLees-Nunan ohh thats great bro.. Love and respect from Karachi Pakistan

How is the bar that holds the weights anchored to the sleeves that glide along the parallel bars?

@MattLees-Nunan

4 жыл бұрын

Great question! Held on by 6mm x 100mm bolts. If you install the bolts through the bar and to one side of the 400mm x 40mm steel, this acts as a guide for the rail👍

@triplemoon69

4 жыл бұрын

Can you show a picture of it please

@MattLees-Nunan

4 жыл бұрын

Hi Laura, I've taken a photo but it won't let me upload it via this method. Is there another way I could send it through to you?

@triplemoon69

4 жыл бұрын

@@MattLees-Nunan you can send it to my email at triplemoon69@gmail.com :_) thank you

@daleparsons1712

3 жыл бұрын

@@MattLees-Nunan Could you also send me a pic please to dwparsons78@gmail.com. Thats the only part of the build I'm not understanding. thanks! Dale

Excellent, I have been looking for ideas like this since all of the gyms in my state currently have a bad case of the mask.

@MattLees-Nunan

3 жыл бұрын

Yeah, it's very frustrating! Let me know if you decide to have a go, would love to hear how you find the videos😊

@williamdDF

3 жыл бұрын

kzread.info/dash/bejne/eX2uzq2KoNO2ltI.html

Hello am interested please tell me the dimensions!!!!

@MattLees-Nunan

3 жыл бұрын

Hi! So the dimensions should be at the start of the movie and are in millimetres. Hope this helps!😊

Furniture Wax or silicon oil, nooooooo to wd40. Awesome build.

@MattLees-Nunan

3 жыл бұрын

Haha silicone spray is probably better!!

How about a list of materials.

@MattLees-Nunan

4 жыл бұрын

Thank you for mentioning! I have just put up the list of materials in the description. Let me know if this helps👍

Amigo desculpa mas eu n consegui compreender o tamanho da altura seria 130m

@MattLees-Nunan

7 ай бұрын

Hola, es posible a preguntarme en Inglis or Español por favor?

@user-xf2nt7ft1k

7 ай бұрын

@@MattLees-Nunan Me confundí ya que la medida de altura sería 1.30?

@MattLees-Nunan

7 ай бұрын

@@user-xf2nt7ft1k la altura sería 1.020m mas or menos hermano

Great video. Music - why?

@MattLees-Nunan

2 жыл бұрын

Thank you! Why music?...Because music is a beautiful thing.

Wow! this is a beautifully elegant design and very close to what I want to build. Thanks so much for posting. I too am having trouble visualizing the cross bar connection to the sliders. Could you send a photo to Bosam53@sbcglobal.net? Also in the video at 5:14 there appears to be another bolt through the crossbar outside of the rail. Can you explain? Thanks so much, Sam

@MattLees-Nunan

3 жыл бұрын

Hi! Thanks so much for the feedback. Greatly appreciated🙏 I will send through the photo now we should explain everything to you. Let me know if it makes sense👍 Matt

@32-dt7er

3 жыл бұрын

@@MattLees-Nunan hi matt could you please send me the photo as well ash123nk@gmail.com

No need for music.

@MattLees-Nunan

2 жыл бұрын

I feel music brings good energy

this people dont realy realize the danger

@MattLees-Nunan

3 жыл бұрын

Please explain the danger

This is awesome!

@MattLees-Nunan

4 ай бұрын

Thank you😀