I'm in need of this one ASAP. I'm so glad i found this video. Thank you. Blessed. From Belize.

Saw this video and made one. I love it! No straps. No falling off. And just pick up your kayak to remove. Also stores on top so you don't have to run back to the vehicle. Thank you for this!

@SaltwaterHorizonsFishing

3 ай бұрын

Glad it could help you!

@kyleroyer9227

Ай бұрын

I have a 96lbs kayak do you think this would hold up for that amount of weight

@SaltwaterHorizonsFishing

Ай бұрын

@@kyleroyer9227 my hoodoo impulse 120 is around the same weight I believe. While I haven’t used it a ton, it has been fine so far. You should read some of the other comments for some concerns people have but I haven’t had an issue

@jedidias7091

24 күн бұрын

Been going thru the same issue. After yesterday I am gonna make one myself. I can now park once load the kayak add them under it. Drag it to the boat launch out of the way of real boaters lol. Stick it on the back of the kayak and head out .

🙋🏻‍♀️Bought my 1st kayak (pelican covert 120 angler fishing kayak) and im definitely going to need something like that to transport it wherever I go. Might try to make it myself... I love how you can leave the wheels on the kayak!!..so clever👏Thanks for showing us this 👍 definitely subscribed 🎉

@SaltwaterHorizonsFishing

10 күн бұрын

Thanks for the support! I have not had any issues but do some research on the scupper cart for your kayak because some have said they have seen issues. Good luck!

Best bit of kayaking kit 100%

@SaltwaterHorizonsFishing

3 ай бұрын

Very helpful for sure!

Brilliant! Im making one. Thanks for the video!

@SaltwaterHorizonsFishing

Ай бұрын

Thank you!

Thanks for the great video. A material list in the description would be helpful.

@SaltwaterHorizonsFishing

2 ай бұрын

Thank you! I forgot to but I will add it

Nice job, cool idea with the paint scheme. 👍👍👍

@SaltwaterHorizonsFishing

2 ай бұрын

Thank ya! I did like how the paint turned out, might need to do my beach cart like that

Definitely a money saver especially when you have considered purchasing a more expensive option like the Wilderness cart.

@SaltwaterHorizonsFishing

9 ай бұрын

Absolutely, saves money for more interesting gadgets like a new rod and reel, etc.

Seems simple. Will try when I get my new kayak soon.

@SaltwaterHorizonsFishing

3 ай бұрын

Cool, let me know how it works for you. Good luck!

Looking good!!

@SaltwaterHorizonsFishing

9 ай бұрын

Thank you!

Wish I would have watched this video before I made mine. Yours was Soo much easier to build. Great video

@SaltwaterHorizonsFishing

2 ай бұрын

Thanks for the feedback!

Love this! Thanks

@SaltwaterHorizonsFishing

Ай бұрын

Thank you!

Maybe trim the ends of the T fittings to get a little more thread on the axle?

@SaltwaterHorizonsFishing

10 күн бұрын

That might help some. I should have just bought a longer threaded rod but thought for sure that one would be enough lol

Great video, exactly what i was looking for

@SaltwaterHorizonsFishing

10 күн бұрын

Thanks for the feedback!

Looks good love the videos

@SaltwaterHorizonsFishing

9 ай бұрын

Thank ya!

Very rarely are scupper holes reinforced to be capable of withstanding the pressure carts that style that put on them. Only a few manufacturers do it. Great idea but just something to consider.

@SaltwaterHorizonsFishing

9 ай бұрын

I appreciate the feedback! The weight of it should be on the bar spanning the bottom of the kayak so unless you’re trying to pull it over large obstacles there shouldn’t be too much pressure on the scuppers and I think it should be okay

@Jpgundarun

9 ай бұрын

I have a Glide Trolley in the rear scupper holes of a 3 Waters Big Fish 120 decked out with a large lithium battery and crate at the back and it doesn't even bother it. You can push the trolley under water and it floats upward into the scupper holes and you simply walk out of the water. Too easy.

@SaltwaterHorizonsFishing

9 ай бұрын

@@Jpgundarun nice setup, appreciate the input!

Looks good. Nice design..👍🏽

@SaltwaterHorizonsFishing

2 ай бұрын

Thank you!

Perfecto sencillo y economico, gracias por el video

@SaltwaterHorizonsFishing

Ай бұрын

Gracias amigo!

Did something similar awhile back and then I recreated the cart and added rod holders into cart. Just an Idea for you to add. It does mean version 2 but it is easy to add some Ts in the long vertical pieces and then adapter another T into that T that you can use as a rod holder I have 4 (1 on each vertical PVC run and then 2 on the bottom horizontal run). Makes the cart sturdier as well. Nonetheless, it just fun to mess with. Thanks for the video, keep it up!

@SaltwaterHorizonsFishing

9 ай бұрын

That actually is a great idea, I will have to look into that. Thanks for the feedback!

I like the kayak caddy idea of taking the caddy with you in case, in case I have to walk back to my truck. Can you list out the pieces of pvc that you used?

@SaltwaterHorizonsFishing

9 ай бұрын

Appreciate the feedback! I can but unless you have the same kayak, it likely won’t fit. It’s just 1” sch 40 pvc and 1” pvc “tee” fittings. If you have the same one I can measure and let you know

“So I changed my mind. I am gonna glue it”😂😂😂😂😂😂

@SaltwaterHorizonsFishing

9 ай бұрын

Not for any particular reason or anything🤷🏼‍♂️

Music was a bit quiet, turn it up a bit plz. I could still hear u talking 😆

@SaltwaterHorizonsFishing

3 ай бұрын

Thanks for the feedback

You changed your mind or your mind was changed for you?

@SaltwaterHorizonsFishing

9 ай бұрын

It’s debatable😂

Very weak spot on the majority of kayaks . Plastic to plastic connection inside scupper not made to have load placed on them .

@SaltwaterHorizonsFishing

3 ай бұрын

I haven’t noticed any problems with it. The bottom of my kayak is pretty flat in that area so the weight is not only on the scupper holes. If it causes any issue I’ll be sure to follow up on it but I think it will be okay. Appreciate the comment!

@richdorak1547

3 ай бұрын

@@SaltwaterHorizonsFishing I'm pullin' for ya !

@SaltwaterHorizonsFishing

3 ай бұрын

@@richdorak1547 appreciate ya!

@johng6988

26 күн бұрын

@@SaltwaterHorizonsFishingI heard cutting a tennis ball and puttin half of one end on the bottom it protects the pipe from making contact with the plastic

@jedidias7091

24 күн бұрын

​@@SaltwaterHorizonsFishingain't nothing gone happen ppl always scared. Good job man gona make one myself.

You are so cute but music is too loud. ❤