Informative, practical... and strangely therapeutic!

Nice and concise. Saved me from coughing up for a jig!

Thank you for this video, I broke one of the stock tuners on my Squier Telecaster and I got a set of Fender non locking tuners and of course the guide dimples were off, this video enabled me to successfully change them, easy to follow and made me confident that I could do this, the d through high e posts seemed really small to the point were you couldn't wind more than once but thankfully it worked, great video and thanks again🙂

Well done. Thank you for taking the time to make this.

Squier: 'Designed and Backed by Fender', and yet still incompatible.

@alecalfaras5936

2 ай бұрын

🎯

Thank for the sharpie idea, very cool.

Thank you for a very well done video. One of the best I have seen.

@ManotickGuitarTech

Жыл бұрын

Thanks, Arnie. I hope you have subscribed to my channel too?

Really happy I came across this video. Will help a ton with my weekend project, thanks!

@ManotickGuitarTech

Жыл бұрын

Glad it will help you out! I hope you have subbed to my channel too?

@joshuariveraflora

Жыл бұрын

@@ManotickGuitarTech oh I did that a while ago, I knew your channel would be super helpful. Take care! I try to like all the videos of yours I watch to support.

Thanks! I'll be doing this job tomorrow.

Nice Vid - well done.

I have had good luck installing Hipshot locking tuners on a few guitars. Because they come with the "universal mounting plates" they go on easily without the need to drill additional holes. Or fill holes.

@ManotickGuitarTech

2 жыл бұрын

Hipshot tuners are great!

@frankstein5967

2 жыл бұрын

@@ManotickGuitarTech yep. I'd like it they were a little more stiff to turn, but they work, and are less money than a lot of others.

This video helped a lot! Thank you

I have some Grover’s that previous owner botched the install. All crooked. I just dremeled off the nibs and straightened them out. No problems yet!!

Aha! Excellent tutorial!

@ManotickGuitarTech

10 ай бұрын

thanks - I hope you have subbed to my channel too?

Just bought some new fender locking tuners to replace a set on my custom Strat and I'm facing this exact issue (I even checked before buying to make sure it was a 'fender style' tuner setup... but alas, off by a millimetre or two). Guess I have some work ahead of me still. Thanks for the great instructional video.

@ManotickGuitarTech

9 ай бұрын

Good luck!

@Jack.Valentine

4 ай бұрын

Thank you, for taking some time to show what others don't.

I bought a walnut 70s style Stratocaster. The bridge is not that good and neither are the machine hands. It’s got the big head stock. The guitar is worn out and I think a gold bridge and a gold Trauner arm with gold hardware will really look cool on this guitar. I watched your video and it was super cool thank you so much now I know how to drill, pen holes, thanks for the video. Have a great day love it I’ve been playing guitar for several years. Like almost 50 I have some knowledge of working on them but now I’m getting more into learning how to work on them. I’ve learned one thing nice tools help a lot. Thanks again. Have a great day.👍🏼👍🏼😁😁😎🎸🎼 and 🎶🎵☮️🎸

@ManotickGuitarTech

10 ай бұрын

Glad you enjoyed the video- I hope you have subbed too?

Thank you

I sure enjoyed watching your work & craftmanship Sir..... I came across a (( "Starcaster" by "Fender" )) , It has a wonder feel & great neck , I'm just wondering if I can make these tuners work for it ? It really does play wonderful & I think once I change out the pickups & electronics it will be a nice replacement for my old Strat that was stolen many years ago.. I do miss it , but it-is-what-it-is.... Thank You for such a well made video & stay blessed...

@ManotickGuitarTech

2 жыл бұрын

Thanks, Danny. Remove one of your exisitng tuners and measure the tumig peg hole then check the spec of the new tuners you want to get. The dia of the hole is the most important thing, it is relatively easy to plug small screw holes if required. I hope you have subscribed to my channel?

@livergen

2 жыл бұрын

@@ManotickGuitarTech Thank You for your reply , that makes perfect since , I've been playing it & haven't started tearing it down (you might say ) I like how it plays ... But that's an easy thing to do to check ... I just subscribed , so all is good now on this end ... Again thank you for replying, You did a wonderful job on your video , very easy to follow ... Stay well... Danny

I would have put tape on the bit as a depth gauge so you know how deep to drill so you dont go too deep.

You think someone at Fender would have had the smarts to design the new locking tuners with the bump for the indents in the same locations as the original tuners. It shouldn’t have been that hard for someone on their design team to make it happen.

@ManotickGuitarTech

2 жыл бұрын

Dave, the older Squiers have different tuners on them and they are not the same as Fender ones; Mexican Strats have the same hole locations.

@Schaz42

Жыл бұрын

@@ManotickGuitarTech The Mexican strats have the same hole locations of the American ones??

@ManotickGuitarTech

Жыл бұрын

@@Schaz42 They should

@jakedanek9364

Жыл бұрын

​@william abercrombie the Mexican strats are the same. I have a 2004 and they lined right up.

My Tele clone has locking tuners on it already but I’m changing strings some time next week when they arrive, I’ve gone to Slinky’s the same as Angus uses. After seeing your other video I ordered what was advertised as a lefty tremolo but I suspect it isn’t, and I’m going to have to modify it to work for me, which I can do, it’s only metal, so I’ll sort it. I’m thinking however I’ll use it on another Tele I’m planning on building, as a bit of a tester, it’s in a relic style so if a tremolo looks a bit weird, it’s not going to matter much, and if I like it, I’ll buy a Bixby lefty for my super Tele I’m planning to build, and looking at parts for now. So lots of fun.

Graphtec Ratio locking tuners are a direct drop-in. Much easier!

@ManotickGuitarTech

11 ай бұрын

good to know... client supplied these ones for installation.

@benjaminpeternorris

10 ай бұрын

Good to know - although they are more expensive than my guitar!!

Another great segment. I have a Strat knockoff I'm planning to use as a mod learning project, what's your opinion on Hipshot locking tuners with the UMP plate?

@ManotickGuitarTech

2 жыл бұрын

Generally, anything hipshot makes is great. The UMP does make it fast and easy- no drilling.

@russwood127

2 жыл бұрын

@@ManotickGuitarTech Good to know, me with a drill in hand is flirting with disaster.

@frankstein5967

2 жыл бұрын

They work well and you don't have to drill more holes. I have a 72 LP deluxe that was missing the klusons when I got it. I found a set of hipshot and installed in about 30 minutes without more drilling.

Would the tuners rotate without the locating pins? The thought of grinding off the pins crossed my mind....

@ManotickGuitarTech

3 ай бұрын

Yes, they are there to hold them in place

@jolkraeremeark6949

3 ай бұрын

​@@ManotickGuitarTechjust got to that part in the video, thanks.

I see that's a Squire .As Im upgrading the tuners on my Fender Jaguar will they drop straight in? Also is the white on the back of the locking tuners meant to be removed or is it part of the design?May sound dumb but hard to tell

@ManotickGuitarTech

6 ай бұрын

They should drop in but I always double check the specs. The white is part of the design

What is that dowel made of? What wood would you prefer?

@ManotickGuitarTech

Жыл бұрын

generally I use maple

@lokng4699

Жыл бұрын

@@ManotickGuitarTech Thanks so much! Could you share where i can get those dowel? currently i have to make dowel myself because there is not much retailer sell such small dowels

@ManotickGuitarTech

Жыл бұрын

@@lokng4699 our local hardware stores carry dowels that size... you might try online Craft suppliers or Amazon

9:30 for the tuner height.

why do you have to hide the serial number of a guitar? Someone explain this to me because I haven't figured it out yet! Thank you!

@ManotickGuitarTech

8 ай бұрын

just privacy

@kacsa-csa6754

8 ай бұрын

@@ManotickGuitarTech what can the serial number of a guitar reveal about my privacy what? nothing ? continue I still don't understand.

@ManotickGuitarTech

8 ай бұрын

@@kacsa-csa6754 somebody can fraudulently claim that it is their guitar that was stolen, or use the serial number when building a fake

Why not use a 1/8 drill to make the holes bigger. More consistent.

You could have bought fender locking tuners that would have fit without drilling.

@ManotickGuitarTech

8 күн бұрын

Not my guitar - the owner bought the new tuners. Fender and Squier parts were not always interchangeable as they are now.

Why turn down dowels. Can't just redrill holes?

dont like to jerry rig

What a dirty low down, just get another guitar or keep it stock...

@procrastinator6902

Жыл бұрын

That's the stupidest reasoning I've ever heard. Would you just get a whole new vehicle bc you replaced the tires on the one you currently have? It's quite possible there isn't a guitar that comes exactly as a person wants it. I've replaced many parts on my strat, they're built to be customized by the user.