DIY: Innofader PNP + Traktor Kontrol Z2 Mixer/Controller Installation Video
www.djbooth.net...
www.innofader.com
For the past few years, there's been one DJ crossfader on the market that seems to rise above the competition. The Innofader is a durable and highly customizable fader that can be purchased and installed to upgrade your current crossfader or linefaders found on a DJ Mixer or DJ Controller. The Innofader can work with many different mixers or controllers and can be adjusted in many different ways so the DJ gets a seriously customized feel to suit his/her fader-needs. Users can adjust the tension, the cut-in distance, and the sharpness of the curve on the Innofader. The Innofader comes in many different models such as the Innobender and the Innofader PNP which work with various styles of DJ Mixers and Controllers. Audio Innovative was gracious enough to send me a new Innofader PNP to show the masses just how easy it is to install inside the all new Traktor Kontrol Z2. Check out the DIY video and the link at the top of the description for more information.
Пікірлер: 81
Thanks for the quick reply and answer. I see an innofader in my Z2 very soon.
Will do. love your work and all you do for the dj community. Peace.
Just heard that someone took the tensioner out the line faders so they are not as stiff
So it will work with the mixers built in switch? Do you recalibrate it in traktor? Or on the fader it's self. Sorry for all the questions!!
Kareem, I got the Innobender which is the PNP type. Put it into my Stanton m207 but I did notice that it wasnt working out of the box until I did the calibration they mentioned. Once I did that, the cut in at 1mm all worked but....my curve control on the unit doesnt work anymore. ideas?
Bom dia ! tenho mixer numark x5 e gostaria de saber como instalar o innofader pnp nele,você pode me ajudar ?
it is the French standards (220V) the crossfader pnp
@Bronxio
8 жыл бұрын
+DJ BENNY electronics works with so little current (besides, surely DC instead of AC). 220V (actually 230 since some years ago because Europe standardization) is transformed inside to another lower current (the same worldwide). No need to worry about that
How many operations doest it last for? My penny&Gilles lasts for about 1,000,000 operation
Love your videos Kareem!! Hey so do I do use the same pnp your using in this video for the line faders on the Z2? I just want to make sure I install mines correctly
Guess I did something!! 3 cheers for me! Thanks man
Ok, got the innofader installed very easy. But I scratch hamster/reverse. How do I set it?
Awesome vid! Very informative.
i love your vids very informative good sheet homie
can i replace with first original innofader(first generation)?
Kareem, thanks a lot for this video!!! Does the crossfader curve adjust knob on the front of the Traktor Z2 still work after installing the PNP or can I only calibrate the curve on the fader during installation?
@RealDJblaze
6 жыл бұрын
Yes, It still works!
Does Z2 comes out with innofaders? Amazon told that ' The Traktor Kontrol Z2 mixer provides a heavy metal, standard installation-height chassis, sturdy RGB control buttons, and Innofaders for rock-solid dependability.'
@RealDJblaze
8 жыл бұрын
The Z2 comes with mini-innofaders... I installed a full-sized metal Innofader PNP for this as it feels more sturdy and has more adjustments that the Mini-Innofaders don't have...
So how different is the cut after the install?
nice print on the Z2, custom made?
but...the z2 come with innfader inside him...so...whats the point? i want to buy this mixer but i saw in youtube allot of issues about his fader...is this change is to fix the problem?... and thanks dor the vid - the best !
@Ninja_Gaijin
5 жыл бұрын
mini is not as good as pnp2/pro2
hey Kareem, great video! I have the Z2 and have been thinking of updating the fader. Did you notice a big difference??
@mrsouthpaw14
10 жыл бұрын
thanks for the quick response! Yea I think I'm going to drop one in this winter. Think my technique will be good enough then to notice the difference.
nice vid. thanks
ok got that. i have 2 more q pleas. so - the difference is that the pnp you can adjust and the mini don't? if i buy 3 of the innofader php i can switch also the faders ? it will fix? thanks !!!
@Ninja_Gaijin
5 жыл бұрын
I believe the mini has no curve adjustment, but you'd need to check the website - innofader.com - they will also be able to advise whether or not you can use as line faders - they need to be modded often to work this way in many mixers I read
Kareem, not sure if I missed it, but will the INNOFADER PNP also work for the LINE FADERS? Never mind...lol...just saw @ 12:53 that you can use the same innofaders for the LINE FADERS. My bad!
@dme3o
10 жыл бұрын
***** Brilliant! Ok, I'm definitely looking to do this as I just got a Z2. Now my next question is: If I replace the stock crossfader with the Innofader PNP, would the curve contour knob on the mixer still work or is the setting on the Innofader PNP fixed? I noticed you said you had to make adjustments before sealing the mixer back after the swap...thanks man!
Nice video again , going to purchase the new Innofader pro 2 for my controller. I know it is a custom fader for scratching but does it really sound as good as everyone said it does?
@RealDJblaze
8 жыл бұрын
+Jose Lugo The fader is flawless... it will only sound as good as the user who is using it though...
@hot4futureyears2come
8 жыл бұрын
cool. that is what I thought, thanks man
innofader pnp works in djm 700?
hey, great vid, but any ideas why my fader seems stuck in after taking the screws out? can't remove it at all :/
@kareemthedream6084
2 жыл бұрын
You're going to have to take a thin flat-head screw driver and pry it out. It's been in there for all these years, so It's probably a little sealed up...
Does the crossfader curve adjust knob on the front of the z2 still work after installing the PNP?
@OnnoKaell
10 жыл бұрын
Thanks for getting back @ me so quickly!
Hi! What cut in/lag/tension settings do you recommend for scratching? Im gonna install one into my Vestax PMC 05...thanks!
@Ninja_Gaijin
5 жыл бұрын
cut in should be a short lag - you should on a sharp curve setting have very little room from closed to open sound in the fader. So you move your finger a hair and it opens the fader. Tension is personal, but it should be 'buttery smooth'. You can go too tight or too loose with these easily, you need to find your own sweet spot. I aim personally for some tension so if you hit it, it doesn't fly to the other side all the way and rebound back a bit, but not too much so it can still fly half the fader length or so when you flick it.
thanks for this video kareem. one question: will this upgrade void the warranty? - regards.
@kidsushi
10 жыл бұрын
***** thanks for the reply! highly appreciated. you didn't stumble into WARRANTY VOID IF REMOVED stickers, did you? :)
@SupaSandeep
10 жыл бұрын
kidsushi the warranty is voided if you unscrew the bottom, but the top comes off without any trace
hi nice vid bro.. ok.. The Full Size Innofader PNP can be adjusted for tension, curve, and cut in.. tension yes, but cut and curve? as i know when we plug our Z2 to TSP they work internally, so the cut n curve programmed by software is'n it? or not?
@RealDJblaze
9 жыл бұрын
It is, but then you can fine-tune it to make the cut in and curve even more custom and more direct to your touch or response. You can really dial in the PNP with the Z2, much more so than the mini innofader.
@elpidiogranatello5160
9 жыл бұрын
***** how tight is the cut? i'm really exited cause i'm getting one of these. thanks in advance
@RealDJblaze
9 жыл бұрын
Elpidio Granatello It's as tight as you want to make it. This is a fully customized fader...
do you have to adjust the curv on the device. or will it still work through the mixer
@RealDJblaze
8 жыл бұрын
+Niko Cama It still works through the mixer...
@djrumble6618
8 жыл бұрын
+DJbooth DJ's thanks
I am from China's DJJACKL You can teach me how to change the PIONEER DJM2000 not miNI Innofader
My DJM2000 want to change Innofader pro can do
@RealDJblaze
8 жыл бұрын
+Tv DjJackL I think you can do it. Check the innofader website...
yes thank u! now im gonna go do all my crazy scratching that i need to do! lol
Cleaned and recalibrated my mini innofader. And after multiple recalibrations I still have 4mm cut in.. useless for scratching
@deangs9982
3 жыл бұрын
Any body can help i have z2 and just got pnp crossfader but the pins dont line up on the connectors
I don't understand why you put in an INNOFADER PNP when it the z2 already comes with the mini innofader which is perfect already.
@TheRoguesy2
10 жыл бұрын
***** I don't need to do research on the Innofader. I bought my Innofader from the very first batch of innofaders 4 years ago and put it into my Audio Innovate AEM 100 replacing the PRO X FADE. Then bought the TTM57 bracket and put into that. Doesn't the innofader mini have tension adjust ? It Just doesn't seem like that great of a cost < benifit addition since the innofader mini is super sharp to begin with and I'm sure it has contour adjustment.
@SupaSandeep
10 жыл бұрын
benwoo innofader mini doesn't have any adjustments... no tension/cut in/curve, nothing like that
@danielmaguire7130
5 жыл бұрын
Mini innofader is trash. Mine bled then when I cleaned it and recalibrated it I got a cut in point of 4mm.. unacceptable
doses anyone know what innofader goes into the traktor s8?????
@RealDJblaze
8 жыл бұрын
+David Kavanagh Mini Innofader PNP-P
@davidkavanagh4966
8 жыл бұрын
+DJbooth DJ's thanks cuz the fader on the s8 has a VERY short life... only 9 days
@lawrencefernandes6083
8 жыл бұрын
+DJbooth DJ's Hi ive been using the S4 the first model and the faders have given way completely they just creep up into the master sound ... can pls suggest what faders i can replace it with ... Thank you so much :)
@RealDJblaze
8 жыл бұрын
+Lawrence Fernandes You can use Mini-Innofaders, but its not easy to change them out yourself. There is a DIY on how to do it somewhere on the internet though...
@lawrencefernandes6083
8 жыл бұрын
Yeah I did follow it and manged to get my faders working for some time but I guess they are worn out now ... got to change them or buy a new controller
I have understood that it comes with 3 innofaders, it was a lie?
@RealDJblaze
9 жыл бұрын
This comes with three MINI-Innofaders that do not have all of the same features as the Innofader PNP which was installed. You can see the size difference in the faders when I remove them. The PNP fader gives the option to manually adjust the curve, the cut-in, and the Tension (tightness) feel of the fader while the Mini alters curve and cut in in different increments and doesn't have the tightness function at all...
@DjFixiProds
9 жыл бұрын
But are they good at least? It is that it me comes tomorrow. To fuck...
@RealDJblaze
9 жыл бұрын
Dj Fixi Yes, the original faders are just fine...
@DjFixiProds
9 жыл бұрын
thanks!!
@DjFixiProds
9 жыл бұрын
hello again! and I have, faders seems to me that they are very hard, to soften any idea? It would be good to grease? thank you
are the line faders replaceable too?
@RealDJblaze
8 жыл бұрын
+sendyoke Yes, they are...