DIY How To Replace Spark Plugs and Wires on 1998 to 2002 Accord
Автокөліктер мен көлік құралдары
Hi Guys and thanks for watching, this video is simple, covers your regular replacing of spark plugs and wires. I hope is helpful.
let me know if you have any questions on this video and don't forget to Subscribe. Thanks for watching
Gratitude www.paypal.me/bullet23
------------------------------------FOLLOW ME---------------------------
Follow me on Instagram
@bulletsolano36
Follow me on Twitter
@bulletsolano
Like my Facebook page
/ luis.b.solano.3
Thanks for watching.
Пікірлер: 142
You do a great job explaining what you're doing. Since I have a 2000 Accord and I got issues, I search you to see if you got a vid out there. Thanks again!
@BulletSolano
5 жыл бұрын
Thanks, no problem
Great job on this video ! The advice to use two spark plug sockets, one with and one without the ring is brilliant, keeping plugs from damage and keeping tools and plugs from getting hopelessly stuck in the hole.
@BulletSolano
4 жыл бұрын
Thanks buddy
If I worked in a repair shop I would want to work with you to learn, you explains things well!
Thank you for making a useful vid that is quick and easy to understand👍🏻 now I got to go find a socket but this is a very helpful vid
@BulletSolano
2 жыл бұрын
No problem
Good job! I use a small piece of pladtic or rubber tubing to seat the plug. You can feel it threading and there's no chance of cross threading cause the tubing will just slip. Cross threading a plug is a freaking expensive nightmare!
Thanks. This is really good information.
'the car feels heavy" that's exactly what it feels like when a spark plug is misfiring or random misfiring, (DTC 0303, 01/02) from third cylinder. yes, lack of power and poor gas mileage. Love your videos thank you sir!
Great job and thank you.
Thanks for making this, big help to me, I'm trying to fix my shudder/shake at low idle problems by myself.
@BulletSolano
3 жыл бұрын
Look for vacuum leaks
@ManDuderGuy
3 жыл бұрын
@@BulletSolano Roger that thank you goodsir. Im using an obd2 atm, for the first time, it could be a bad iacv, bad spark plugs, vacuum leak etc etc. Thanks again.
@ManDuderGuy
3 жыл бұрын
@@BulletSolano Looking for vacc leaks like you said. One thing i found is that one of the small lines (there are two right next to each other)that feeds from the main air intake seems to be kinda loose. It looks like it is or was sealed with some kind of black tar adhesive where it attaches to the big thick air intake tube. That "tar" looks like it has gotten loose and gooey and the connection point seems loose. I wonder if that tar needs to be stripped off with mineral spirits and reapplied.....
@ManDuderGuy
3 жыл бұрын
Thats some adhesive yeah like i thought, "gasket maker" gunk. I think my real problem is that the air system needs a little cleanup. Anyway im not gonna bug you about it, thanks for helping me get started though.
flawless thank you.
@BulletSolano
6 жыл бұрын
Thanks
Hey bro!! Just got my plug wires done! Thanks a lot, man!
@BulletSolano
3 жыл бұрын
No problem
@IceInVeins916
3 жыл бұрын
Did you use lubricant on the wires?? I was gonna do mine today
@randysookoo444
3 жыл бұрын
@@IceInVeins916 No, I didn’t use any lubricant. The NGK wires doesn’t come with lubricant.,
@IceInVeins916
3 жыл бұрын
@@randysookoo444 thanks I did mine and it’s been running good so far. I seen another video where a guy puts grease on em but I didn’t.
@randysookoo444
3 жыл бұрын
@@IceInVeins916 Cool., if you can, replace the PCV valve and the cap and rotor. Mine was burnt out., Be SUPER carful with tightening the bolts on the distributor cap. I overnighted and, broke one of the bolts in the distributor. I ended up having to take it to a shop since I don’t have a timing gun to reset the timing. The entire distributor had to be replaced., Sucked!!
Thanks man wish me luck I'm gonna change mines
@BulletSolano
3 жыл бұрын
No problem
Helpful thanks
@BulletSolano
3 жыл бұрын
Thanks
Great vlog
@BulletSolano
4 жыл бұрын
Thanks
Thanks for the video. How do I know when to stop tightening the spark plug? How do I know I am applying 13 foot-pounds of torque?
@BulletSolano
3 жыл бұрын
In some spark plug box said how to torque, I think is tide until you get resistance then 1/4 turn, but check the box or get a torque wrench
nice video. subscribed
@carolynweaver5061
5 жыл бұрын
Do you have to Gap the plugs
@BulletSolano
5 жыл бұрын
No
Thanks for the video, is it ok to plug the new cables into the old distributer cap? I would also like to replace the distributor cap and rotor. Thanks!
@BulletSolano
3 жыл бұрын
Yes it’s ok
Here I am learning from him a lady yes I touch my car very helpful
this spark plug change coming from a former 2012 maxima owner is crazy. I was ready to take the car apart.
Bullet, do you have a video of how to replace fuel injectors? Im a big fan of your videos
@BulletSolano
4 жыл бұрын
Hey bro thanks, not yet in the accord bro
Hi i do have a problem with accord 99 and it doesn’t accelerate than 3000rpm. Is this problem with spark plugs or wires or distributor ? Should i keep changing one by one to give it a try ?? Any suggestions would be highly appreciated thanks
@BulletSolano
4 жыл бұрын
Check the level of your oil, is the level is ok, check or replace your vtec solenoid valve, don’t change parts randomly kzread.info/dash/bejne/jGuKuruKaa-ukdI.html
🇩🇴 good video
@BulletSolano
5 жыл бұрын
Thanks
Does this replacement help wit the car jerking a lot and acceleration problems ?
@BulletSolano
3 жыл бұрын
Probably not, you have to do a tuneup anyways, but if you don’t have a check engine light probably you have egr problems or transmission problems
Thanks for the amazing helpful videos as they saved me lots of money over 4 yrs! I still have 1 issue with my Honda Accord 2000 ex v4, every time I come to a stop light or stop sign my RPMs go below 500 almost shutting off and sometimes it does shut off but it starts right over should I start with the distributor I have a brand new battery and a rebuild alternator and also there is NO check engine lights so I'm very confused. Also how often should I change my spark plugs? Gracias Bullet.
@BulletSolano
Жыл бұрын
Hey bro, clean your idle air control valve and put a new gasket on it
@markluyando8992
Жыл бұрын
@@BulletSolano thanks again!
@AlexLiskovich
3 ай бұрын
@@BulletSolano Do you have a video for that?
@BulletSolano
3 ай бұрын
@AlexLiskovich kzread.info/dash/bejne/lXmC2qWHhJTbhNI.htmlsi=Pc0TTDiDsroquzLx
hey quick question i recently changed sparkplugs and pcv valve now my car starts when it wants to.i checked the 6 sparkplugs and they were gapped correctly then i changed the new pcv valve to the old one and my car seems to work better.am i tripping or is that possiblr
@BulletSolano
4 жыл бұрын
Is posible that the car can vibrate allot with a bad PCV Valve, but is the can doesn’t start!! That something I never heard before
@franciscobejar7227
3 жыл бұрын
Im getting a PCV valve from Honda after reading this. 45$ for it but I'm not sure on whether to spend 140$ for spark plugs from Honda or go to AutoZone and get them for about 20-30$.
@BulletSolano
3 жыл бұрын
You can get the NGK spark plugs for Autozone
HEY BULLET, once there is oil in the spark plug wells is it enough to clean it out with some carb cleaner...or is better to replace?
@BulletSolano
Жыл бұрын
Clean them
Would it be 13 lbs of torque for honda accord 2002? Also THANK YOU, your videos have saved me multiple times. Just did the downstream o2 sensor yesterday. My honda for some reason when I come to a stop everytime lots of white smoke from exhaust when I go to accelerate. I've been dealing with this for months and can't figure it out.
@BulletSolano
3 жыл бұрын
Yes is the same 13 lbs, if is too cold white smoke is gonna come out, is vapor, but if you see white smoke with a little blue tint in it, your piston rings are fried, and you’re gonna need an engine really soon
@mykesmith5177
3 жыл бұрын
No its not from cold start it happens repeatedly right when I start car and at ever light when I accelerate. I haven't checked piston rings. But this all started happening about 10 months ago right after I changed my oil. I should also mention I have an oil leak. Could it be oil burning?
@mykesmith5177
3 жыл бұрын
Also thanks bro!!!
@mykesmith5177
3 жыл бұрын
I've changed the starter, the sparkplugs, wires, rotor, distributor cover, o2 sensors, motor mounts, still shakes and as I mentioned the smoke...
@BulletSolano
3 жыл бұрын
Do a compression test
gracias
@BulletSolano
3 жыл бұрын
De nada
Do you still own this vehicle ? You've helped me alot
@BulletSolano
Жыл бұрын
Customer’s vehicle
Hi, I'm having a problem with my Honda Accord 2000- It keeps jerking frequently and I'm honestly terrified of it breaking down. I've never had a car before and I'm not sure how to fix it or what I'm doing :( Do you think it's the spark plugs?
@BulletSolano
Жыл бұрын
Scan for codes, and go from there
Did you not need to check the spark plug gap before installing ? Or do sparkplugs come with the gap already correct ?
@BulletSolano
4 жыл бұрын
It should be correct but check it anyways
@Jez2008UK
4 жыл бұрын
@@BulletSolano You're right, I bought the genuine Honda spark plugs and they come with the gap already set :) Many thanks bro' you've helped me a lot :)
@BulletSolano
4 жыл бұрын
No problem bro
That socket with the rubber inside it did you do it your self or you bought it ??
@BulletSolano
4 жыл бұрын
I bought it, all spark plug sockets are like that
Bro What difference do ngk spark plug cables have to cheap cables from other brands? How does the engine improve?
@BulletSolano
4 жыл бұрын
NGK is better because you will have better and stronger spark, meaning more fuel economy and better fuel burning on the chamber, plus more horsepower
@Peguerochannel
4 жыл бұрын
thank you very much now that I will put ngk spark plug wires
@BulletSolano
4 жыл бұрын
No problem
Don't forget the spark plug lubricant
@honestabe1940
2 жыл бұрын
Many NGK plugs don't recomend anti-seize compound. They come with a special coating on them.
Bulletsolano cual es la calibración de las bujías para el honda accord 2002? Si es . 040 Pulgadas?
@BulletSolano
4 жыл бұрын
.039 a .043
What’s the tools using n needs grease on the spark plugs n the boosters
@BulletSolano
Жыл бұрын
amzn.to/3wXYdlx Yes you can put some grease
Is there a way you can get a picture of the firing order. The numbers on the distributor and the way that it's supposed to be
@BulletSolano
8 ай бұрын
kzread.info/dash/bejne/k6CcqpWvh66emJc.htmlsi=l7g5pgUYRm16Ptko
I have an issue with the spark plug on the second cylinder. 1,3, and 4 I was able eto remove and replace with new plugs. But on the second cylinder plug, it catches with the rubber but it just turns in both directions, it seems I cannot tighten or loosen the plugs as once is it caught with the rubber inside the 5/8, it spins pretty freely with no resistance. Had never changed the plugs on this car since I've had it. I'm wondering if the thread is bad on the plug and is not catching the metal. Has anyone had an issue like this? Maybe the plug is broken itself inside. Also I notice with the rubber it does get stuck and I remove it with a needle nose plier. I cannot tighten it as well as it spins just as freely clockwise, just as counter clockwise
@BulletSolano
Жыл бұрын
You have two options try to remove it with an extractor or remove the heads
Hi, what is the socket size please? Thanks for the video.
@BulletSolano
6 жыл бұрын
5/8 spark plug socket
@someoneyoudontknow7407
4 жыл бұрын
Thank you!
bro can u help me out on knowing how the wires go? i took em off an didnt mark them to know how to put em back
@BulletSolano
6 жыл бұрын
+Carlos Sanchez ok Bro really easy, the short cable is the closest to the distributor
@Big_LosF
6 жыл бұрын
Bullet Solano xan u better describe? 4goes on left? 3 goes on top? or right?
@BulletSolano
6 жыл бұрын
+Carlos Sanchez sorry Bro the shortest cable goes on 4 the next cable the second shortest goes on 3 the next on 2 and the large cable goes on 1
@BulletSolano
6 жыл бұрын
+Carlos Sanchez if that’s not clear let me know so I can make a little video for you
@Big_LosF
6 жыл бұрын
Bullet Solano that worked. thx brotha. much appreciated
Good video. What gap did you use for plugs?
@BulletSolano
4 жыл бұрын
I go with what NGK got on the plug 0.044
how do you do the torque tho
@BulletSolano
3 жыл бұрын
Get them tide and half a turn, is on the box
How do you know how many pounds of torque
@BulletSolano
4 жыл бұрын
I get the info from my buddy that works at Honda
I need help if u can same car but my cables broke off inside trying to find way to get it out
@BulletSolano
4 жыл бұрын
Hey, get some needle nose pliers
@matthewhernandez2017
4 жыл бұрын
I did that it broke off like all the way down in there someone said the get a long needle and Wedge it out
@BulletSolano
4 жыл бұрын
Yep that’s the way to do it
@matthewhernandez2017
4 жыл бұрын
Bullet Solano thank you very much keep videos coming I used the video on my EGR Valve thanks
@BulletSolano
4 жыл бұрын
Thanks, no problem
Can you show us how you torque the sparks plugs please!!
@BulletSolano
Жыл бұрын
Is on the box of the spark plug, after the plug is tide do 1/4 of a turn
Can a bad sparkplug make car hesitate n loss of power ?
@BulletSolano
5 жыл бұрын
Yes because if the spark plug is bad is one cylinder down
@jairomontenegro4408
5 жыл бұрын
Your right , can seafoam damage sparkplug?
@BulletSolano
5 жыл бұрын
I don’t think so
@BulletSolano
5 жыл бұрын
Depends how you used it
@jairomontenegro4408
5 жыл бұрын
I used in the gas tank n motor
Do the wires actually go bad?... Seems very unlikely.
@BulletSolano
4 жыл бұрын
Yes with time they go bad
Why do we got to change the wires..??
@BulletSolano
5 жыл бұрын
Wire are part of the tune up with time they get bad and if you don’t replace them they get cracks and they loose conductivity
@camarenafam
5 жыл бұрын
@@BulletSolano ok i see. No wonder one of my wires where the spark plug is at it looks melted.. thanks for your help and response.. 👍👍
@BulletSolano
5 жыл бұрын
No problem
Lexus did not even do that style their shit is so complicated
Ruvvver???? You mean rubber???
@Galcala909
3 жыл бұрын
ur an ass. ..english is his second language. u probably cant even speak 2 languages
@Galcala909
3 жыл бұрын
u know what he ment ur just beinng a trump supporter
@nicholaslarffarello8962
3 жыл бұрын
I speak gangster and english
@goopnation870
3 жыл бұрын
dude called him a trump supporter
@BulletSolano
3 жыл бұрын
It’s ok man, I’m here to make money not to please anybody