That little hack for printing the second side is EXACTLY what I needed. Thank you!!

I started a new bath and beauty business. It is so stressful teaching yourself how to do everything. If it weren't for people like you to teach others so they don't have to spend so much time learning by mistake, I would have already stopped. Thank you so much for sharing. I went through the steps as you were teaching them and it was perfect. Thank you again!!!

@savannah6378

Жыл бұрын

What printer are you using? For some reason I keep doing everything correctly but it still prints a inch off

@valariegarcia1266

Жыл бұрын

@@savannah6378 Older model HP Officejet Pro 6830.

@SillyCrafting101

Жыл бұрын

You got this!

@vasilahodjaeva8522

8 ай бұрын

​@@savannah6378 ох у меня та же проблема

Mind blown 🤯 I’ve been printing two different pages and gluing them together for a few years, if only I had seen this video sooner!! Such a clever idea!!

@SillyCrafting101

7 ай бұрын

Glad I could help !

if you're still looking for a better way to align your cards, I like to enter the x and y axis coordinates so I know they're exact instead of shifting them around.

@SillyCrafting101

2 жыл бұрын

Wow. Thanks for the tips! I will try it out

@pln4679

Жыл бұрын

Me too! I got tired of guesstimating!

@natiliafranklyn8699

Жыл бұрын

​@@pln4679 see

@tiffanywoolfrey7979

Жыл бұрын

How does one do this?

This was exactly what I was looking for. I was trying to figure out how to get the cut lines to match and you moving the second page over was perfect. Thanks so much for sharing 😊

@SillyCrafting101

6 ай бұрын

glad it was helpful!

I'm starting my own sticker business this year and this was the first video that made it look easy to understand how to line everything up for business cards ❤

@SillyCrafting101

2 ай бұрын

awesome! glad to hear it

Exactly what I needed! Thank you so much! xxx

@SillyCrafting101

Ай бұрын

glad to help!

Thank you so much! You did such an excellent job at explaining everything without the video being too long & wordy! It was perfect 🤩 thanks girl! Bee 🐝 blessed much love & light

@SillyCrafting101

Жыл бұрын

Glad it was helpful! Thanks for watching !

Thank you so much for this video. I do not usually do business cards, but my daughter asked me for some. With your helpful video (part 1 & 2), I was successful. Thank you again!

Thank you for this! I have an event this weekend and I didn't realize I was out of cards! This was so helpful.

@SillyCrafting101

2 жыл бұрын

Awesome! Glad to hear it ! Thank u for watching 💕

@Z.haller

2 жыл бұрын

Does the color already come when using a colored design or have to buy something in specific for the color to come out?

hey! one thing that helps it go faster is when duplicating you can click on what you want to duplicate and hold down the option button and then use your finger on the keypad and slide to duplicate. also as you are pressing the option button to duplicate also hold down the shift button and it aligns the stuff you duplicated so its easier. this helps you not have to use the align tool every time!

@SillyCrafting101

Жыл бұрын

Thanks so much ! I'll try it

You did a great job talking us through ! Thank you!

@SillyCrafting101

Жыл бұрын

thank you so much!

I've watched a couple videos on this and i couldn't figure it out until now... Thanks:)

@SillyCrafting101

Жыл бұрын

Glad I could help!

Brilliant! I had no idea I could do this with my cricut. Thanks a ton.

AWESOME!! Thank you SOOO much for sharing, this is exactly what I was looking for!!!

Thank you !!!

@SillyCrafting101

6 ай бұрын

You're welcome!

Im literally going to try this tonight!! Thank you so much for uploading this your a Star 🌟😊

@SillyCrafting101

Жыл бұрын

Hope you enjoy it! you're so welcome!

Thank you SO VERY much for doing this!!!!!!

@SillyCrafting101

Жыл бұрын

You are so welcome!

GAVE ME THE EXTRA PUSH THAT I NEEDED TO GET IT RIGHT!! I FIND IT EASIER TO GROUP THE IMAGES CENTERED, THAN PUT IT ON THE SQUARE, THAN ATTACH EACH SIDE... MAKES IT EXACT POSITIONING!

@SillyCrafting101

Жыл бұрын

thank you! i will give it try

Might need to run your cricut through a calibration... I noticed it missed the cut just a tad. The calibration could fix that. Your video really helped me so I'm sharing the 1 thing I know. Lol

This was extremely helpful! Thank you so much for this video!

Thank you sooooo much. This was very helpful

@SillyCrafting101

2 жыл бұрын

I'm so glad it helped !

this was super helpful! Thanks a looooot!

@SillyCrafting101

Жыл бұрын

thanks for watching!

Thank you I’m trying to learn so I can help My friend with her Small business

@SillyCrafting101

Жыл бұрын

Best of luck!

Awesome tutorial! Thanks so much 🙏🏽

Thank you for this video!!!

@SillyCrafting101

Жыл бұрын

You are so welcome!

Thank you so much for this tutorial! It was easy to follow the steps and institutions were accurate!!

@SillyCrafting101

2 жыл бұрын

Of course. Glad it helped !

Your business card is super cute

This is super helpful! Thank you!

Life Saver!! Thanks!

@SillyCrafting101

2 жыл бұрын

😊

Thanks so much I was trying to make Thank You cards and didnt want to have to pay to have them printed

I am so glad you did this, thanks so much!!!

@SillyCrafting101

Жыл бұрын

You are so welcome!

I would resize both of them together at the very start so they will be the same size the whole time.

Thank you so very much😊🙏🏽🙏🏽

OHHHHHHHHH. Good thinking

Does anyone else notice that the 2nd page is always off by 1/4 inch or more, even when you do it this way?

@SillyCrafting101

2 жыл бұрын

Are u moving the 2nd page to the opposite side ?

@deepeebb

2 жыл бұрын

@@SillyCrafting101 how do you that? Im habing the same issue 🥲

@SillyCrafting101

2 жыл бұрын

@@deepeebb click, hold and drag

@lovechinky6703

2 жыл бұрын

experiencing this same issue and its driving me nuts

@Rndmzd.podcast

2 жыл бұрын

You can adjust the size by unlocking the second page and adjust the size then lock it again so you dont accidentally ruin the size you designate for them

I’m here from Tiktok😁love your videos

@SillyCrafting101

2 жыл бұрын

Thanks so much ! 🙏

I do exactly the same thing and is off ong idk what to do

Thank you! ❤❤❤

@SillyCrafting101

Жыл бұрын

You're welcome 😊

Thanks so much

@SillyCrafting101

Жыл бұрын

You're welcome!

This was so helpful! Thank you so much.

you are awesome thank you!!!!!!

@SillyCrafting101

Жыл бұрын

thanks for watching!

Wow. Thanks ☺️ 😮

@SillyCrafting101

Жыл бұрын

You're welcome 😊

You don't need to manually align things for design space if there's multiple. Just copy and paste as many as you want and when it goes to review it will automatically align them even if on your design space layout they're overlapping as they do when you paste over and over.

@NickDoddTV

9 ай бұрын

I do this for print and cut. There's literally Zero alignment of your designs required, as long as you've got the even number of 10 per side or whatever it is they'll align automatically every time

@SillyCrafting101

8 ай бұрын

the alignment here is for the purpose of mirroring the front and back of the page. i see what you mean tho. i'll try it in my next video. thank you!

Hi , ahhh well I keep printing over and over ..my stuff is either too high or too low .. when I got an actual one that printed good I think it reset placement… not sure

@SillyCrafting101

Жыл бұрын

alignment is always tricky. maybe try adding a bleed when printing?

Thank you much ❤this tutorial is so easy and short…something was looking for the past two years 😢

@SillyCrafting101

Жыл бұрын

Glad it was helpful!

Hi, whenever I click make I never have the full black square around my design like yours does, only the corners that the Cricut scans. I can't shift everything to the right side because of this, how do you get the black line / square around the ewhole design?

@SillyCrafting101

9 ай бұрын

i believe that's because cricut updated and does the outlines different. ill make an updated video soon

Hey, if I use plain cardstock paper (white) does the color already come when using a colored design? Or have to buy something in specific for the business cards to come with color?

@tauheedahmuhasin1920

Жыл бұрын

need colored printer ink

Hi, I can’t move the paper on the mats to print on one corner and the second page on the other corner 😢

@SillyCrafting101

Жыл бұрын

oh no :( maybe save your project and reopen the system?

Hello did you used normal ink cardiges or sublimation colors? thanks

@SillyCrafting101

Жыл бұрын

Normal ink with HP printer

@leytann

Жыл бұрын

@@SillyCrafting101 thanks 🙏

Wow!

This was a great breakdown, I’ll still learning on my end unfortunately everything didn’t come out as it should. Do you know how to change the printer to print in color or will you go in settings.? Mine printed in black and white.

@SillyCrafting101

Жыл бұрын

i use system dialogs in the printer

wow. Amazing

@SillyCrafting101

Жыл бұрын

You are so kind

Thank you so much for this video. I was over paying ppl to do something I know I can do at home. Question where do you get the paper to make your business cards?

@SillyCrafting101

2 жыл бұрын

From Amazon. Link in description

My canva is black not white, and the left side of your screen is on the bottom for me. No option to align the cards for me. I’m so frustrated, not sure what to do!

@SillyCrafting101

Жыл бұрын

Sorry. Haven't seen that before. 😕

Please what type of paper was used?

@SillyCrafting101

10 ай бұрын

80lb cardstock. Link in description

It’s all good until I get to the cutting part. My cricut keeps trying to cut the letters out instead of the rectangle? Any tips?

@SillyCrafting101

Жыл бұрын

Make sure you are flattening with a solid shape in the back

what kind of cardstock did you use?

@SillyCrafting101

11 ай бұрын

80lb cardstock. linked in description

What kind of paper can be used?

@SillyCrafting101

Жыл бұрын

80lb cardstock

what is the cost for each card, paper plus equipment? thx.

@SillyCrafting101

Жыл бұрын

Links of what I use in the description. Your welcome to do the math

How did the ink not peel from the bottom side of the cards???

@SillyCrafting101

10 ай бұрын

ive never seen ink peel before

@jjuanguevara1

10 ай бұрын

@@SillyCrafting101 it seems to happen to glossy cardstock. Matte not so much

If I do a thank you business card. How do I get the design on the back of the card.

@SillyCrafting101

2 жыл бұрын

I showed that in my tutorial. Print on both sides of the paper

which printer you using ?

@SillyCrafting101

Жыл бұрын

hp envy. in description

What kind of paper did you use for business cards

@SillyCrafting101

Жыл бұрын

carldstock

Where did you buy the card cutting machine?

@SillyCrafting101

Жыл бұрын

amazon. link in amazon storefront

I'm watching this 2 years later, and this IS the best business card video, and so simple. I don't need to go anywhere else. Thank you for your time and help along our making journey.

@SillyCrafting101

2 ай бұрын

im glad. about to do an updated video soon

the fact that i searched this up for lash aftercare/loyalty cards i made on canva 😂

What kind of paper did you use?

@SillyCrafting101

2 жыл бұрын

Link is in the description below. It's the 80lb white cardstock

Can't figure how to move page after you click make it

@SillyCrafting101

2 жыл бұрын

Click, hold and drag

Hi!! What paper did you use?

@SillyCrafting101

Жыл бұрын

80lb cardstock

You need to put the first part in the bio

@SillyCrafting101

Жыл бұрын

It is

How or where to get the software?

@SillyCrafting101

Жыл бұрын

Canva and cricut desig space are free online

I’m still having problems and doing exactly what you say 😢

@SillyCrafting101

Жыл бұрын

yes

Here to support with subscription

@SillyCrafting101

Жыл бұрын

thanks so much!

Thank goodness for pause & reverse …

everything is aligned and perfect until the printing process. even when i move one side to the upper right hand corner and leave the other side where it is, it doesn’t line up. and then if, by a miracle, it does like up, the cricut cuts it unevenly. in serious need of help 😭

@nicolekallend561

2 жыл бұрын

I have the same problem - the black border lines done match up.

@sheilabecerra2439

Жыл бұрын

Same for me

@bdboston

Жыл бұрын

@@nicolekallend561 Me too. Back is not centered.

@nicolekallend561

Жыл бұрын

@@bdbostonI'm sorry to say that I gave up and had them printed professionally. I hope you manage to find a way!

Thank for all your trouble

I LOVE YOU KING OF THE WORLD SIR AMAMRA SAID THANK YOU SEE THAN.

DIY 📇

you are not doing the alignment correctly. if you keep using align to top or bottom it It will never really alinge across the board. I would make sure they are on the same grid line both vertical and horizontal line from the beginning

@SillyCrafting101

7 ай бұрын

Thank you for the tips !

My text keeps trying to get cut 😭

@SillyCrafting101

Жыл бұрын

Are you flattening?

It's soo off

@SillyCrafting101

Жыл бұрын

Trial and error

I find the title of touch’s video annoying. I know you can print with some Cricut and I’m just trying to find a video that does this on card. All these videos talk of printing with Cricut and then use a separate printer.🙈

@SillyCrafting101

Жыл бұрын

The cricut is a cutting machine. It does NOT print. If u do a print and cut feature, u have to print with a separate printer.

@coffibaa

Жыл бұрын

It honestly took me all day of researching to discover it doesn’t print. For some reason I thought the latest versions did! My bad! 🙈 Thank you! I’ve ordered a printer.x

@SillyCrafting101

Жыл бұрын

@Tammi Preece it would be cool if the cricut could do both. Maybe one day lol. No problem. Here to help !