Great idea! I had forgot that heavy duty batteries use carbon for an electrode.
@phoebevicente60575 жыл бұрын
hello, i would like to know what's behind the connection where you put a transistor? where u can touch the paint and use it as a switch
@bestamerica6 жыл бұрын
' that new to me about conductive electronic ink / paint... how many limit volt with battery... is this electronic same flow as copper wire
@catherineharris47463 жыл бұрын
Simply outstanding!👍👍👍
@k.o.k.22586 жыл бұрын
Can i use it as an alternative of conductive fibre or a natural conductor.........?
@petaca393 жыл бұрын
Hello, very good, your 2 very educational videos and I was reading the queries that you made about the project and I had some doubts. 1- you can use 1.5 old batteries already exhausted (sorry, my English is not very good and maybe I misunderstood its explanation in the video) 2- When using battery centers, not only graphite is incorporated, they also have the specific binders of each battery, so depending on the brand of battery, they may obtain a different conductive performance, it could perhaps be carried out in each case a measurement with a tester or multimeter preview and see its conductivity. 3- You proved that this paint has electrical resistance, you have to redo it, for example that commercial paints can draw a maximum of 1 meter of conductive wire. 4- and obviously, since they are drawn on paper, care must be taken of the load that is placed on it, since it can heat up like any resistance and produce fire due to the materials used. 5- For the dissolution of the core material of the 1.5v battery, you use common water, that is what I understood. or maybe you see this perdudique the conductive mix is a matter of trying and seeing what happens. 6- It would also be good as an experience to add more common water and see how the resistivity decreases and thus obtain a resistive table according to the ml of water that are added to the mixture And finally they can carry out the same tests of the paper using fabrics. I am doing similar experiences with E-textile cyber_99x@hotmail.com
@NeoFrontierTechnologies3 жыл бұрын
Hello. Now there is a quick and easy way to get conductive paint. Nice. What resistance do you measure when the paint is dry ? Over different distances.
@LEO-xo9cz4 жыл бұрын
What resistance does it have compared to graphite?
@quotationmotivation6362 жыл бұрын
Oh very thanks ... Simple tutorial and your idea
@nandu17704 жыл бұрын
Can we use it for shielding?
@Manny_News_Blogs_Tutorials2 жыл бұрын
Hey thanks for this creative idea! I was able to fix the keypad carbon contacts of my vintage Uniden Sportcat SC150 scanner. I painted the broken traces with your conductive carbon paint then coated them with thin layer of nail polish. Now the number keys 4, 0, DATA, and PRIORITY keys are now working! I will try this next on my Panasonic Lumix camera with broken contacts on the rotary switch. Hope this works as well.
@edwardwhatley1603
Жыл бұрын
🤔 "coated them with thin layer of nail polish" that should have just OVER INSULATED your conductive coating, better would have been to have just added a trace of white glue as a binder
@starchildi20
Жыл бұрын
impressive but i also had similar questions. and i am not above average in this subject so please excuse my ignorance. it is not obvious to me how you were able to use your hands to complete a circuit. and without knowing some estimate of voltage. is that 120 ac? i am in southern usa. so that is what we use for those type light bukbs. and that voltage or similar would certainly be a problem on what seems to be a papertowel so i am asking basically is there some sort of known value of resistance anywhere in your model? awesome model either way
@komillz5 жыл бұрын
Hi can we add dyes to color it
@administrator10373 жыл бұрын
Can i use synthetic graphite powder thats 99 percent purity with either acrylic paint or water based pva glue?
@aaronmencher49782 жыл бұрын
can you post a schematic for the lightbulb switch circuit? i found the one that uses the arduino, but i would like to do it with only the transistor if possible.
@msmakar3 жыл бұрын
Hi Can I use this mix to fix remote control buttons?
@otisstokley53285 жыл бұрын
What does the other end of the wire touch
@paulcohen1555 Жыл бұрын
Which glue you have used for binding the carbon powder?
@antonios49263 жыл бұрын
Thanks for the video. From Cyprus
@Kakunoshin_Niitsu Жыл бұрын
Thank you Sir, you have enlighten me a lot
@DEYDRMXDEYDRP3 жыл бұрын
Did anyone see that quick message at the end? “Last day on earth” ??? Am I tweaking?
@eryavrilio3751
2 жыл бұрын
It was a joke because the capacitor is explode
@robertcross54024 жыл бұрын
That's a great video. But does the paint fully dry?
@supersu33966 жыл бұрын
Does it really works?
@husnainanwaar19925 жыл бұрын
Can we use this as a Solar panal
@nitamachado34104 жыл бұрын
Can I use it to print circuit
@crazyivan0v2 жыл бұрын
So if you use paint as a carrier for the carbon, you could paint a fabric and the fabric coated would work like a stylus on a phone screen?
@ihzanursyahbana77733 жыл бұрын
is the conductive ink did u use are waterproof?
@sripal.jain43 жыл бұрын
Amazing...
@Engycation2 жыл бұрын
Very Nice Video Can I use such Link in repairing fixable Flat cables
@kbtube81256 ай бұрын
could this be used to fix a TV remote rubber button sheet, membrain, won't make contact any more. could this be painted on to the pads?
@Spark-Hole3 жыл бұрын
Can I mix it with rubber glue.
@mmmsabeel4 жыл бұрын
Hi nro. I want to make a digital counter. How to do ?
@busultan82635 жыл бұрын
I did it and it worked, thanks for sharing your innovative ideas with us 👍🏻
@mydulislam4218
4 жыл бұрын
Is it durable for month to month .yar to yar. when it dry is it work well.
@elevateecho218
2 жыл бұрын
@@mydulislam4218 has not written any good or negative news since it has not written yet in a very long period and I have been brought to a different perspective as well with a few things in my head to help with a few more people in this year than the new years of grace in their own business as a whole life insurance industry and they will have a plan of success for their business as
@ashutoshgupta85085 жыл бұрын
Does this ink is durable? Does this ink sticks with paper? Or it's erasable ?
@amamulhaque89835 жыл бұрын
I liked your video sir
@daudafzaal21552 жыл бұрын
How many cell u used for 20 drops of water ?
@decf1525 жыл бұрын
Can't it work if we color it ???
@alimahlees32385 жыл бұрын
Brilliant
@gianniskaragiannis92935 жыл бұрын
Hey, thanks for the video! Can you use it to repair rear window car deffoger grid? In my case I have a few broken grid lines. Do you think that will work?
@edwardwhatley1603
Жыл бұрын
Use a MUCH-MUCH-MUCH-MUCH-MUCH better product, as is being sold at auto supply stores . . .metallic based with LESS resistivity and is being much more robust.
@nicole.truong5 жыл бұрын
I’m doing this for my science project !!!
@spokesofmusic9299
3 жыл бұрын
What liquid use used to make this paste?
@soulkiss58536 жыл бұрын
I want to apply it on my piano keyboards pcb becaus the keys are not responsive. Will it explode like that?
@someshkumar74926 жыл бұрын
please make full video on touch switch........................
@tinfoilhatsarethenewblack87884 жыл бұрын
You would end up getting a more homogeneous paint if you would only use the crushed carbon rod, the other stuff is manganese dioxide wich doesn't dissolve in water. Because of this, your paint ends up being so chunky.
@gwadry5 жыл бұрын
Can I use that for broken fog line in rear glass of my car?? Please answer me?? Thx bro
@catherineharris4746
3 жыл бұрын
Yes you can, you just have to cover it with a tiny bead of lacquer👍
@sammepo31903 жыл бұрын
Does it smell?
@s.sradon97822 жыл бұрын
video summary: create a suspension of graphite powder in water (which you can get from carbon-zinc cells) I recommend you use alcohol instead and you can use a binder like PVC or dextrin however, if you are making a heating element pick a bindr that won't decompose at the temperature.
@freetubemovies.6445 жыл бұрын
Tell me how to make White colour ?
@some1gotchedi5 жыл бұрын
hi the carbon rod won't mix with the water why is that? also do i mix the grided up carbon rod with the outer black powder ? thanks !
@some1gotchedi
5 жыл бұрын
hello???? where r u plz reply
@some1gotchedi
5 жыл бұрын
r u buzy
@ManoharOfficial2 жыл бұрын
does this work for repairing membrane keyboard traces?
@starchildi20
Жыл бұрын
i wonder alse since my stove ribbon cable has separated from heat
@rleonmx4 жыл бұрын
primero dice que usaremos el carbon pero luego que hay que triturar la mezcla de zinc
@albinjose8272 Жыл бұрын
It worked sir
@bs2-n4 жыл бұрын
Aatik, When you touched the ink with your finger, the lamp went on, can I replace lamp with a turning dynamo ? can the touching process works with turning a dynamo circuit ? thanks
@MrRobot-vc2gk
4 жыл бұрын
why not, it tranfers the electrons mate
@bs2-n
4 жыл бұрын
@@MrRobot-vc2gk thanks make
@mssburr3 жыл бұрын
Nice video, But I was hoping it was going to be a video to make conductive paint to paint on the wall using cheap Walmart paint..lol So that I could EMF ground my bedroom...lol Because that store bought shielding paint is to high..lol I like the finger to the light bulb... Thanks for sharing.
@budhihart81615 жыл бұрын
Can we use it to make ultracapacitor?
@LeslieJMarshall
3 жыл бұрын
No
@mohamedrizwan199006 жыл бұрын
Thank u boss
@duskbug13 жыл бұрын
Would you know the conductivity of this compared to silver conductive paint?
@edwardwhatley1603
Жыл бұрын
PISS POOR, as being compared to silver print / paint
@starchildi20
Жыл бұрын
@@edwardwhatley1603 was wondering the same as i attempt to repaire stove touchpad ribbon cable
@kornshadow0974 жыл бұрын
Transistor to a relay to turn on the bulb? How do you wire it and why does it work with touch?
@Aatikslab
4 жыл бұрын
KornShaDoW097 you can watch my this video for more info kzread.info/dash/bejne/fmqelbixprG8ZcY.html
@charnjit5255 жыл бұрын
I want to draw circuit on PCB for buttons like TV remote, calculater . can I use this paint ??????
@storygoldteam8843
4 жыл бұрын
Yeah
@BLUEMOON-xb3jl
4 жыл бұрын
will carbon with water good on plastic? or you recommend waterbase glue?
@storygoldteam8843
4 жыл бұрын
@@BLUEMOON-xb3jl you need glue to be perfect
@inspiretube2374
3 жыл бұрын
@BLUE MOON ,you
@kapilgoswamiTechInventor6 жыл бұрын
is activated carbon different than normal carbon.?
@dhruvsheth7260
5 жыл бұрын
Yes
@saurabhgupta88442 жыл бұрын
Thanks 🙏🙏
@jeokiko89905 жыл бұрын
Haha. Feels like I'm watching greatscoot chanel youtube
@DamianRene
4 жыл бұрын
not very sutile ripoff :D
@zilverheart2 жыл бұрын
Is it safe to apply this to pcb electrical contacts?
@edwardwhatley1603
Жыл бұрын
insane
@secondline46653 жыл бұрын
This is the next generation. Our future
@marcelputra2995 жыл бұрын
how did you grind the carbon? By the way great video!
@MrThunderbirdfire
5 жыл бұрын
Use hammer or and solid piece of rock just any thing. But don't use food utensils for grinding.
@JackSparrow-qv5iu
2 жыл бұрын
Graphite powder
@frenzkylelopez51415 жыл бұрын
Can i use old batteries in making conductive paint. Plzzzz replyyy!
@abdullahbinmohammed88
5 жыл бұрын
Yes
@hikaru4345
4 жыл бұрын
Carbon in batteries doesn’t give you the energy so dead batteries work as great as the brand new one
@sanuswarnkar51762 жыл бұрын
Thank you sir
@SaurabhSharma-is4xg6 жыл бұрын
Hey can you tell me if this conductive paint conducts AC current as well?
@Aatikslab
6 жыл бұрын
yes!! Of course
@SaurabhSharma-is4xg
6 жыл бұрын
Aatik's lab But how
@SaurabhSharma-is4xg
6 жыл бұрын
I've tested but it only produces sparks
@kingkhan5868
4 жыл бұрын
Y would u use it with AC current ? If u want to control any appliance you can use relay with transistor
@l0k048
3 жыл бұрын
the difference between ac and dc is that ac changes the polarity every 60 seconds, so it's pretty much the same thing on the wire. if you're thinking of ac from the wall, the main problem is not ac, is the voltage, which can cause the paint to heat up. i reccomend painting in something fireproof, with many layers of paint. it's still not optimal, if you plan doing something lilke controling an appliance, you can use wires, and a relay. closing/shooting a circuit will cause sparks in both the paint or copper wire, because the eletricity starts flowing before it has an optimal contact, witch creates resistance, and thus heat, melting metal and creating plasma, creating these sparks. also be sure to wear ppe and follow your local regulations for eletric instalations
@emadhasan15473 жыл бұрын
Good
@manikavishwakarma45922 жыл бұрын
Can we do electroforming with this paint?
@MegaNostr
Жыл бұрын
I join this issue.
@TimmyCanadianComicHunter4 жыл бұрын
Is there a list of materials and quantity do this experiment , ? Student I work with wants to do this for science fair what will she need ? Are there any any hidden steps ?
@thorstendornbach3976
3 жыл бұрын
how did it went?
@bhagyalakshmi61226 жыл бұрын
Hello can you revert with email regarding the switches.
@danielisaacsanpedrorodrigu69186 жыл бұрын
How many batteries did you use to make the paint ???
@Aatikslab
6 жыл бұрын
well i use 4 cells but it actually depends on the quantity you want to make
@mamtadasa9727
5 жыл бұрын
+Aatik's lab How do u grind that
@LakshmiLakshmi-iy9hm5 жыл бұрын
I want all items names and its list for a competition
@amit3212 жыл бұрын
Thanks
@ilciavo2 жыл бұрын
Isn’t it dangerous to open a battery like that?
@savaninagarkar44195 жыл бұрын
How did u make the bulb glow by touching the conductive paint?? It's an emergency can u plz reply fast and show the circuit u made?
@Aatikslab
5 жыл бұрын
SAVANI NAGARKAR watch this video of mine kzread.info/dash/bejne/fmqelbixprG8ZcY.html
@musthafaulikkal10633 жыл бұрын
It doesn't working, What I do
@kumarpramodsharma5 жыл бұрын
Sir please tell me this touch circuit diagram please sir
@videoisstreaming
4 жыл бұрын
O bolbe na.
@SaurabhSharma-is4xg6 жыл бұрын
Hey can you tell me the full circuit of the touch bulb
@Aatikslab
6 жыл бұрын
Saurabh Sharma full video on this topic is coming soon :)
@SaurabhSharma-is4xg
6 жыл бұрын
Can you make it before 25 june
@hyqhyp4 жыл бұрын
Dude that pasty stuff in batteries isn't carbon, it is MnO2 (manganese dioxide).
@MadhanR-bh8dt4 жыл бұрын
Can we use dead batteries?
@Aatikslab
4 жыл бұрын
No!! Only 1.5v cells
@kabirsaiyed62016 жыл бұрын
Plz make a touch switch
@AmjadAli-fw2db4 жыл бұрын
I want to draw circuit on PCB for buttons like TV remote, calculater
@Aatikslab
4 жыл бұрын
NO it doesn't work that way
@edwardwhatley1603
Жыл бұрын
Buy and use a product already made for restoring those contacts . . . . or CRT aquadag coating . . . . . .this mix is not durable and develops micro fissures when dried out.
@cristianreyes62733 жыл бұрын
The bulb turns on cause he is creating a path way for the current to travel when he touches the paint as is hand touches the black small clamp!
@Tradewithsr3655 жыл бұрын
Touch switch making
@sykeamer88_204 жыл бұрын
Btw I tried it band it didn’t transfer a single amp
@Aatikslab
4 жыл бұрын
NO it can't be used to turn high power loads. You can only pass few milli-amps through it. Just to light up an led, provide signal to a micro controller or to the base of transistor
@Aatikslab
4 жыл бұрын
Here watch the second part for more info kzread.info/dash/bejne/fmqelbixprG8ZcY.html
@moradzinivand10152 жыл бұрын
چه ماده ای بهش اضافه میکنه
@aminemarref2 жыл бұрын
This did not work for me. I used old exhausted batteries of a cheap brand, extracted the black stuff, ground it, and added tap water until I got a mix density visually similar to the one in the video.
@JASSMAPEC6 жыл бұрын
A
@sagar_assopa_145 жыл бұрын
Not working
@keithboone48006 жыл бұрын
I didn’t understand what kind of cell to use
@rc3d490
5 жыл бұрын
Carbon zinc type
@sykeamer88_204 жыл бұрын
“0 resistoance” even though there is like 60ohm
@entomopathogenicfungus904 Жыл бұрын
0:29 😂 doesn't look like zero resistance to me
@whitemamba71283 жыл бұрын
RIP capacitor
@athensWEB4 жыл бұрын
Tell the truth buddy… carbon rod conducts bcoz atoms are closely packed & touch oneanother… when powdered no matter how fine particles are it will not conduct. The water is conducting here, after few minutes h2o evaporate, u can do this with sand… Try aluminium paint which is permenant.
@sunrises57745 жыл бұрын
Lol .my mom raised me by telling batteries are like bomb since childhood I'm afraid of it.but u ripped battery nothing happened. Now I'm overwhelm. 😫😫😫😫😫
@MrThunderbirdfire
5 жыл бұрын
Lithium ion batteries are more dangerous compared to other Rechargeable batteries. Li>alkaline>ni-mh>ni-cd>normal batteries(non-rechargeables
@dream42235 жыл бұрын
Translation in Urdu please
@nobody21985 жыл бұрын
Whats with last day on earth?
@ferretface87823 жыл бұрын
I coat my PLA 3d prints so I can electroplate them in metals.
@NdumN
3 жыл бұрын
Does it work? I was thinking of trying myself...
@Shad0wCitizen
Жыл бұрын
@@NdumN have you tried that? Did it work for electroplating 3d prints?
@NdumN
Жыл бұрын
@@Shad0wCitizen I wish I could say yes, but I have too much projects in my head... 😅
Пікірлер: 167
I like the light bulb switch! Brilliant!
Great idea! I had forgot that heavy duty batteries use carbon for an electrode.
hello, i would like to know what's behind the connection where you put a transistor? where u can touch the paint and use it as a switch
' that new to me about conductive electronic ink / paint... how many limit volt with battery... is this electronic same flow as copper wire
Simply outstanding!👍👍👍
Can i use it as an alternative of conductive fibre or a natural conductor.........?
Hello, very good, your 2 very educational videos and I was reading the queries that you made about the project and I had some doubts. 1- you can use 1.5 old batteries already exhausted (sorry, my English is not very good and maybe I misunderstood its explanation in the video) 2- When using battery centers, not only graphite is incorporated, they also have the specific binders of each battery, so depending on the brand of battery, they may obtain a different conductive performance, it could perhaps be carried out in each case a measurement with a tester or multimeter preview and see its conductivity. 3- You proved that this paint has electrical resistance, you have to redo it, for example that commercial paints can draw a maximum of 1 meter of conductive wire. 4- and obviously, since they are drawn on paper, care must be taken of the load that is placed on it, since it can heat up like any resistance and produce fire due to the materials used. 5- For the dissolution of the core material of the 1.5v battery, you use common water, that is what I understood. or maybe you see this perdudique the conductive mix is a matter of trying and seeing what happens. 6- It would also be good as an experience to add more common water and see how the resistivity decreases and thus obtain a resistive table according to the ml of water that are added to the mixture And finally they can carry out the same tests of the paper using fabrics. I am doing similar experiences with E-textile cyber_99x@hotmail.com
Hello. Now there is a quick and easy way to get conductive paint. Nice. What resistance do you measure when the paint is dry ? Over different distances.
What resistance does it have compared to graphite?
Oh very thanks ... Simple tutorial and your idea
Can we use it for shielding?
Hey thanks for this creative idea! I was able to fix the keypad carbon contacts of my vintage Uniden Sportcat SC150 scanner. I painted the broken traces with your conductive carbon paint then coated them with thin layer of nail polish. Now the number keys 4, 0, DATA, and PRIORITY keys are now working! I will try this next on my Panasonic Lumix camera with broken contacts on the rotary switch. Hope this works as well.
@edwardwhatley1603
Жыл бұрын
🤔 "coated them with thin layer of nail polish" that should have just OVER INSULATED your conductive coating, better would have been to have just added a trace of white glue as a binder
@starchildi20
Жыл бұрын
impressive but i also had similar questions. and i am not above average in this subject so please excuse my ignorance. it is not obvious to me how you were able to use your hands to complete a circuit. and without knowing some estimate of voltage. is that 120 ac? i am in southern usa. so that is what we use for those type light bukbs. and that voltage or similar would certainly be a problem on what seems to be a papertowel so i am asking basically is there some sort of known value of resistance anywhere in your model? awesome model either way
Hi can we add dyes to color it
Can i use synthetic graphite powder thats 99 percent purity with either acrylic paint or water based pva glue?
can you post a schematic for the lightbulb switch circuit? i found the one that uses the arduino, but i would like to do it with only the transistor if possible.
Hi Can I use this mix to fix remote control buttons?
What does the other end of the wire touch
Which glue you have used for binding the carbon powder?
Thanks for the video. From Cyprus
Thank you Sir, you have enlighten me a lot
Did anyone see that quick message at the end? “Last day on earth” ??? Am I tweaking?
@eryavrilio3751
2 жыл бұрын
It was a joke because the capacitor is explode
That's a great video. But does the paint fully dry?
Does it really works?
Can we use this as a Solar panal
Can I use it to print circuit
So if you use paint as a carrier for the carbon, you could paint a fabric and the fabric coated would work like a stylus on a phone screen?
is the conductive ink did u use are waterproof?
Amazing...
Very Nice Video Can I use such Link in repairing fixable Flat cables
could this be used to fix a TV remote rubber button sheet, membrain, won't make contact any more. could this be painted on to the pads?
Can I mix it with rubber glue.
Hi nro. I want to make a digital counter. How to do ?
I did it and it worked, thanks for sharing your innovative ideas with us 👍🏻
@mydulislam4218
4 жыл бұрын
Is it durable for month to month .yar to yar. when it dry is it work well.
@elevateecho218
2 жыл бұрын
@@mydulislam4218 has not written any good or negative news since it has not written yet in a very long period and I have been brought to a different perspective as well with a few things in my head to help with a few more people in this year than the new years of grace in their own business as a whole life insurance industry and they will have a plan of success for their business as
Does this ink is durable? Does this ink sticks with paper? Or it's erasable ?
I liked your video sir
How many cell u used for 20 drops of water ?
Can't it work if we color it ???
Brilliant
Hey, thanks for the video! Can you use it to repair rear window car deffoger grid? In my case I have a few broken grid lines. Do you think that will work?
@edwardwhatley1603
Жыл бұрын
Use a MUCH-MUCH-MUCH-MUCH-MUCH better product, as is being sold at auto supply stores . . .metallic based with LESS resistivity and is being much more robust.
I’m doing this for my science project !!!
@spokesofmusic9299
3 жыл бұрын
What liquid use used to make this paste?
I want to apply it on my piano keyboards pcb becaus the keys are not responsive. Will it explode like that?
please make full video on touch switch........................
You would end up getting a more homogeneous paint if you would only use the crushed carbon rod, the other stuff is manganese dioxide wich doesn't dissolve in water. Because of this, your paint ends up being so chunky.
Can I use that for broken fog line in rear glass of my car?? Please answer me?? Thx bro
@catherineharris4746
3 жыл бұрын
Yes you can, you just have to cover it with a tiny bead of lacquer👍
Does it smell?
video summary: create a suspension of graphite powder in water (which you can get from carbon-zinc cells) I recommend you use alcohol instead and you can use a binder like PVC or dextrin however, if you are making a heating element pick a bindr that won't decompose at the temperature.
Tell me how to make White colour ?
hi the carbon rod won't mix with the water why is that? also do i mix the grided up carbon rod with the outer black powder ? thanks !
@some1gotchedi
5 жыл бұрын
hello???? where r u plz reply
@some1gotchedi
5 жыл бұрын
r u buzy
does this work for repairing membrane keyboard traces?
@starchildi20
Жыл бұрын
i wonder alse since my stove ribbon cable has separated from heat
primero dice que usaremos el carbon pero luego que hay que triturar la mezcla de zinc
It worked sir
Aatik, When you touched the ink with your finger, the lamp went on, can I replace lamp with a turning dynamo ? can the touching process works with turning a dynamo circuit ? thanks
@MrRobot-vc2gk
4 жыл бұрын
why not, it tranfers the electrons mate
@bs2-n
4 жыл бұрын
@@MrRobot-vc2gk thanks make
Nice video, But I was hoping it was going to be a video to make conductive paint to paint on the wall using cheap Walmart paint..lol So that I could EMF ground my bedroom...lol Because that store bought shielding paint is to high..lol I like the finger to the light bulb... Thanks for sharing.
Can we use it to make ultracapacitor?
@LeslieJMarshall
3 жыл бұрын
No
Thank u boss
Would you know the conductivity of this compared to silver conductive paint?
@edwardwhatley1603
Жыл бұрын
PISS POOR, as being compared to silver print / paint
@starchildi20
Жыл бұрын
@@edwardwhatley1603 was wondering the same as i attempt to repaire stove touchpad ribbon cable
Transistor to a relay to turn on the bulb? How do you wire it and why does it work with touch?
@Aatikslab
4 жыл бұрын
KornShaDoW097 you can watch my this video for more info kzread.info/dash/bejne/fmqelbixprG8ZcY.html
I want to draw circuit on PCB for buttons like TV remote, calculater . can I use this paint ??????
@storygoldteam8843
4 жыл бұрын
Yeah
@BLUEMOON-xb3jl
4 жыл бұрын
will carbon with water good on plastic? or you recommend waterbase glue?
@storygoldteam8843
4 жыл бұрын
@@BLUEMOON-xb3jl you need glue to be perfect
@inspiretube2374
3 жыл бұрын
@BLUE MOON ,you
is activated carbon different than normal carbon.?
@dhruvsheth7260
5 жыл бұрын
Yes
Thanks 🙏🙏
Haha. Feels like I'm watching greatscoot chanel youtube
@DamianRene
4 жыл бұрын
not very sutile ripoff :D
Is it safe to apply this to pcb electrical contacts?
@edwardwhatley1603
Жыл бұрын
insane
This is the next generation. Our future
how did you grind the carbon? By the way great video!
@MrThunderbirdfire
5 жыл бұрын
Use hammer or and solid piece of rock just any thing. But don't use food utensils for grinding.
@JackSparrow-qv5iu
2 жыл бұрын
Graphite powder
Can i use old batteries in making conductive paint. Plzzzz replyyy!
@abdullahbinmohammed88
5 жыл бұрын
Yes
@hikaru4345
4 жыл бұрын
Carbon in batteries doesn’t give you the energy so dead batteries work as great as the brand new one
Thank you sir
Hey can you tell me if this conductive paint conducts AC current as well?
@Aatikslab
6 жыл бұрын
yes!! Of course
@SaurabhSharma-is4xg
6 жыл бұрын
Aatik's lab But how
@SaurabhSharma-is4xg
6 жыл бұрын
I've tested but it only produces sparks
@kingkhan5868
4 жыл бұрын
Y would u use it with AC current ? If u want to control any appliance you can use relay with transistor
@l0k048
3 жыл бұрын
the difference between ac and dc is that ac changes the polarity every 60 seconds, so it's pretty much the same thing on the wire. if you're thinking of ac from the wall, the main problem is not ac, is the voltage, which can cause the paint to heat up. i reccomend painting in something fireproof, with many layers of paint. it's still not optimal, if you plan doing something lilke controling an appliance, you can use wires, and a relay. closing/shooting a circuit will cause sparks in both the paint or copper wire, because the eletricity starts flowing before it has an optimal contact, witch creates resistance, and thus heat, melting metal and creating plasma, creating these sparks. also be sure to wear ppe and follow your local regulations for eletric instalations
Good
Can we do electroforming with this paint?
@MegaNostr
Жыл бұрын
I join this issue.
Is there a list of materials and quantity do this experiment , ? Student I work with wants to do this for science fair what will she need ? Are there any any hidden steps ?
@thorstendornbach3976
3 жыл бұрын
how did it went?
Hello can you revert with email regarding the switches.
How many batteries did you use to make the paint ???
@Aatikslab
6 жыл бұрын
well i use 4 cells but it actually depends on the quantity you want to make
@mamtadasa9727
5 жыл бұрын
+Aatik's lab How do u grind that
I want all items names and its list for a competition
Thanks
Isn’t it dangerous to open a battery like that?
How did u make the bulb glow by touching the conductive paint?? It's an emergency can u plz reply fast and show the circuit u made?
@Aatikslab
5 жыл бұрын
SAVANI NAGARKAR watch this video of mine kzread.info/dash/bejne/fmqelbixprG8ZcY.html
It doesn't working, What I do
Sir please tell me this touch circuit diagram please sir
@videoisstreaming
4 жыл бұрын
O bolbe na.
Hey can you tell me the full circuit of the touch bulb
@Aatikslab
6 жыл бұрын
Saurabh Sharma full video on this topic is coming soon :)
@SaurabhSharma-is4xg
6 жыл бұрын
Can you make it before 25 june
Dude that pasty stuff in batteries isn't carbon, it is MnO2 (manganese dioxide).
Can we use dead batteries?
@Aatikslab
4 жыл бұрын
No!! Only 1.5v cells
Plz make a touch switch
I want to draw circuit on PCB for buttons like TV remote, calculater
@Aatikslab
4 жыл бұрын
NO it doesn't work that way
@edwardwhatley1603
Жыл бұрын
Buy and use a product already made for restoring those contacts . . . . or CRT aquadag coating . . . . . .this mix is not durable and develops micro fissures when dried out.
The bulb turns on cause he is creating a path way for the current to travel when he touches the paint as is hand touches the black small clamp!
Touch switch making
Btw I tried it band it didn’t transfer a single amp
@Aatikslab
4 жыл бұрын
NO it can't be used to turn high power loads. You can only pass few milli-amps through it. Just to light up an led, provide signal to a micro controller or to the base of transistor
@Aatikslab
4 жыл бұрын
Here watch the second part for more info kzread.info/dash/bejne/fmqelbixprG8ZcY.html
چه ماده ای بهش اضافه میکنه
This did not work for me. I used old exhausted batteries of a cheap brand, extracted the black stuff, ground it, and added tap water until I got a mix density visually similar to the one in the video.
A
Not working
I didn’t understand what kind of cell to use
@rc3d490
5 жыл бұрын
Carbon zinc type
“0 resistoance” even though there is like 60ohm
0:29 😂 doesn't look like zero resistance to me
RIP capacitor
Tell the truth buddy… carbon rod conducts bcoz atoms are closely packed & touch oneanother… when powdered no matter how fine particles are it will not conduct. The water is conducting here, after few minutes h2o evaporate, u can do this with sand… Try aluminium paint which is permenant.
Lol .my mom raised me by telling batteries are like bomb since childhood I'm afraid of it.but u ripped battery nothing happened. Now I'm overwhelm. 😫😫😫😫😫
@MrThunderbirdfire
5 жыл бұрын
Lithium ion batteries are more dangerous compared to other Rechargeable batteries. Li>alkaline>ni-mh>ni-cd>normal batteries(non-rechargeables
Translation in Urdu please
Whats with last day on earth?
I coat my PLA 3d prints so I can electroplate them in metals.
@NdumN
3 жыл бұрын
Does it work? I was thinking of trying myself...
@Shad0wCitizen
Жыл бұрын
@@NdumN have you tried that? Did it work for electroplating 3d prints?
@NdumN
Жыл бұрын
@@Shad0wCitizen I wish I could say yes, but I have too much projects in my head... 😅
U