Watching this at 4 am ... now I know how to change a turbo for a g20 that I’m probably never gonna have ... :/

@classdirector9994

3 жыл бұрын

I’m here at 5am

@vanntabor7606

3 жыл бұрын

Damn bro. Get that loan and eat noodles everyday😭😂

@salvatrucho0960

2 жыл бұрын

@@vanntabor7606 😂😂😂😂

@carcrazyguysa4059

2 жыл бұрын

Never say never! Anything is possible

@basicfaze3751

Жыл бұрын

Here at midnight

U guys are awesome for releasing this video..im actually going to be installing my pure 800 at the end of the week because of this video! Saving thousands of dollars because of you guys!! 👊👌👌

@KiesMotorsports

3 жыл бұрын

Good luck with it! It's not bad at all, with the right tools

@shelbyhaiketic4212

2 жыл бұрын

After a year what’s ur 0-60 after the pure 800?

@nathanielordonez2257

2 жыл бұрын

What do u do for a living I WANT /NEED this car these new generation m340i’s ain’t no joke that b58 engine is mean bone stock it’s insane off the lot I can only imagine adding a turbo or anything else 500hp for a sedan sheeesh I need that

@microbeast83

Жыл бұрын

Can you tell me how much a turbo set up cost for m340i? I mean everything including required supporting hardware and installation. Want to daily it with 91oct pump but open to other fuel sources so long as availability and reliability are there. Id be more than happy with 600 whp.

Awesome videos! Every single video is explained in every little detail possible! Love what you doing! I would love to bring my car for every single installation! Thank you for taking your time working on each video! great job!!!

This is how you do a DIY everything clearly explained. Perfection.

Probably your best video .... yet!... super informative I would not call it DIY... not for me that is, but documentary level material. Thank you man!

Turbo Powaah! Great job Kies!

One of the best videos I have seen .

Brilliant video Bryan love the G20 👍👍🇬🇧🇬🇧

Amazing detailed video brother! I really like when I watched 2 times

A well described iprocedure. Very informative. I might only add the benefits ôf using magnetic Torx bits while running smaller hardware fasteners as we are aware of how easily Torx fastener hardware tends to escape with smaller sizes. If he called out the actual fastener size and location of each is the only difference from an actual manufacturers professional release. Great job on this video

So easy explained and done.... respect👍

Well done yall.. this is awesome!

I installed my whole turbo from this videos thanks bro

Awesome, thanks for showing 👍

"It's not something you have to do. It's something we like to do" PRO TALK! 🔥👌 smashing it Bryan.

@dkbeast7779

3 жыл бұрын

Can we upgrade for a f10 LCI ? Please any recommendations

GREAT video!!

respect your hard work

This is an amazing video, thank you.

Quality vid , no drama, jus down to it , subscribed 👊

Vary good illustrations well done.

Fantastic detailed video, guys. I appreciate the extra effort you put in for all the great video shots. Also, it's great to see the use of torque wrenches! ?: with the vacuum coolant bleeder, do you need to be concerned about closed thermostat and/or heater core creating issues?

Epic install great job......

Turbo made in Poland! Greetings from Poland! :D

Good work

Wow no need to drop the subframe like on the N54. Love it

Great video well done ..

Quality material. Props. 🌟 🌟 🌟 🌟 🌟

Amazing video

I have an f80 and love all the content especially f80 content! I pretty much grab a comfy blanket on the couch after the kids are in bed and get a glass of adult beverage and catch up on Tommy's are your vids! Keeps me sane in these crazy times! Thanks. Look forward to all the future content😁🍻 Need to mod my car more....

great video

That car is so damn clean

I really enjoyed watching this videos. You made everything look easy. The song that you put in the background really went a long with this video👌

KiesM Power 😎👌👌🚗

Very very top explication

@45:24 twerrk them bolts lol , great video though can’t wait to upgrade to a b58

DYNO TIME!! 😈

Can't get my mind off those b58 engines lately!

i wish they made one for the n55 (beyond ps2), or at least a custom exhaust manifold for better airflow

@KiesMotorsports

3 жыл бұрын

Same here!

man how you learned to do all that so neatly

I think the only part I would be most comfortable doing is putting the engine cover back on. Good video. I’ll wait for my warranty to expire first

@aaronsamadi133

2 жыл бұрын

It depends on someone’s guts lol

@Gingerrising

Ай бұрын

You do it yet? 👀

Guide to be a pro with BMWs: 1) Watch ChrisFix 2) Watch more ChrisFix 3) Watch kies Motorsport. 4) Watch some more ChrisFix and kies Motorsport

@S54VR6

3 жыл бұрын

ive never seen chrisfix work on a bmw

@cupompa

3 жыл бұрын

@@S54VR6 kzread.info/dash/bejne/mWyNvKhuk7qdXaQ.html

Oddly , I wanted them to make a video on this before they made it

Thanks for the fantastic video! gives me the confidence to do this on my own. However, I have a question regarding the coolant reservoir for the intercooler...as I had to replace my intake manifold/intercooler, and wasn't sure if it required the same vacuum process to refill?

Super, super detailed video 🤯 If all mechanics would work like this ... It would be heaven 😅 One question though, no need to preload the turbo with oil or turbo additive for the first startup ?

@daybitdjones8961

3 жыл бұрын

lol...not all mechanics have the luxury or time to be detailed...typical mechanics or technicians as they are called now work on flat rate..so the faster they get a job done the more they make

Nice 👍💪

Thanks for that very detailing vid! Very good work! Do you have such a great one for a n55 upgrade with pure too? 🤔

Not that I would ever do this but great video as always. What was the total time without editing? Looks like a big job.

Amazing video!!! What tune are you using?

Like videos/ information great.

Hi guys; Let me start by saying that I love your channel and enjoy everything you do on your cars. I think it's safe to say you convinced me into getting a 2016 428i grand coupe for myself, never thought I would and I totally love it. Now, I've got a couple upgrades, mostly esthetics and been able to install everything myself following your instructions, but when I got the led radio trim and went to install it I realized I couldn't because my car ,apparently, is not wired to support this upgrade. I doesn't even have the ashtray light, not that is not working, It doesn't have it, not the light nor the cables... nada. Have you encounter something like this before, what should I do?. I'd really appreciate any help / advice you can give me Thank you

Woow Plz F40 118d front bumper removal video!!!

Wow compared to the n54 this is so much easier

What are those bar lights you have attached under the hood, I need them. Also, nice vid very detailed makes the job look doable.

@Vennillion

3 жыл бұрын

Looks like LED light bar attached with ziplocks, you can buy em at most lighting stores.

That’s an easy job....

yep!!! Dyno time... :-)

Next time please make the review sound and high speed review of then and now.

Well done bro, what a difference. Thumbs up 👍 ps: 9:32 I would like to know the name of the beats in the background? Thanks

Wow. Does this turbo fit in a BMW Z4 M40i? Thanks 😊

damn that is alot of connection

plzzzz dyno and test drive video

When do we get to see it drive👀👀👀👀

What do I do if I break the hook for the downpipe sensors? Not the clips themselves but the one where you mentioned push to the side

Could you please guys make a video on how to replace rod bearings in a S85 or S65 engine?

I think it should be G20 in the title. G30 is the 5 series if I am correct.

"You dont need a car lift to do this"... Sure.... But you used one anyway, which made it a gazillion times easier.

@thistory2723

3 жыл бұрын

Relax Phillip

@aj2734

2 жыл бұрын

😂

so im guessing this also works with the 2019 G30?

@kiesmotorsport ❤ always on point

I love it and I would like you to install one for me please!

I was wondering, do you guys get paid for making these videos. Brian you are very knowledgeable and if ever I wanted my m340i done I would feel very comfortable having you do it. Great video and keep up the good work!!

Why is there also a two port turbo for this same M340i? What's rhe difference? Do both go exactly in the same spot?

So how long would you say this takes from start to finish? If you have a lift and all tools necessary of course

Watching this for when i do get a m340i 😂

Hmm, @ 38min:11sec,...It looks like BMW went with a lower Cell count catalytic converter on th eG20 M340 vs that on the F30 340!

Shouldn't the exhaust manyfold has an external wastegate for the turbo pressure regulation ?

Tienen algún turbo para 2016 BMW 428i ? Creo que es F32

do you have to retune when adding the new turbo

Can you install a pure800 on a m340i with catted downpipe, cold air intake, jb4 tune?

Pure 800 turbo with stock hpfp?

where do you found new chassis online data base for services and torque specs for this new platform

Do a Dyno on this!

hi, do i need professional ecu tuning after i change to the pure turbo? thanks

Is it a similar process for the G30?

If this car was xdrive would it make for a more complicated I stall?

With stock B58 turbos you can already get 480-520hp with standard fuel

@Onthreego808

3 жыл бұрын

Whp?

6:18 disconnet mid pipe from downpipe and then remove downpipe its easier then to Remove complete exhaust right?😂

Hello guys; I was wondering can you help me change my steering wheel to a m sport one.

Can you upgrade the turbo without anything else?

does the pure b48 turbo work on the g20 330i chassis? or is this b58 turbo the only one that works in the g20 chassis

does tu pump enough for pure 800 on MHD ron 98? Asking becouse im currently on stage 2 + and wonder if pure 800 could give me 500+hp...

Does anyone know how much a turbo set up cost for m340i? I mean everything including required supporting hardware and installation.

Why does Pureturbo calls them P800? Can it make 800hp? Before, PT called there turbos Stage1 or Stage2, now they do like TTE, but TTE’s numbers are what hp they makes... I mean it sounds strange if pt can get 800 from the b58, when TTE calls there b58 turbo TTE580

any other coding or mods needed to make this run correctly?

Who makes the stock turbo? Is it BMTS (Bosch & Mahle)?

Anyone know where I can get the turbo install kit?

I wish I saw this before I installed my DP. I broke those clips and now the sensors are secured with zip ties 😭😭

How much you charge to install a pure 800 turbo on a 2016 340i?

Hey Bryan, was wondering if you’ve had this happen to you. My auto start/stop was on and I was at a stoplight so the car shut off and I when I released the brake pedal to turn the car on, it hesitated to turn on then it just stalled and went from D to N. This has happened twice now so I’m guessing it’s not just a one time glitch

@daybitdjones8961

3 жыл бұрын

you may have an issue with the start stop motor generator... take to local dealer to get inspected if under warranty

Can this be installed on a 328i?

not sure if this turbo works for x5 45e too?

What about bmw 330i any turbo ?