Make sure to subscribe to my other DIY KZread channel here; kzread.info/dron/GYVUM2XEm20OQkC6XuFTdw.html

@richardsneddon2976

Жыл бұрын

Hi donny I watch a lot of your vids and learned a lot . Quick question bud I picked up an 038av super and it has a drum sprocket as opposed to a rim sprocket I have seen the magnum with a rim sprocket so is it possible to convert. Thanks

@arnowijngaard8628

Жыл бұрын

​ 77⁷😅.⁸ik😮 m'n n n.m.

@grenivancolina7571

Ай бұрын

6

You're proving quite the craftsman Don! In addition to your awesome small gas engine mech abilities, your fabrication skills are great as well. Thanks as always for your videos. God bless. Rev. D.

@donyboy73

Жыл бұрын

Thanks 👍

@vernstenli6987

Жыл бұрын

*

I think it's the best design, for smaller applications. Nicely done and thanks for sharing Dony.

Great to see good craftsmanship still exists

Great Job Don. I made one in High school in machine shop. You still amaze me how you can take nuts and bolts and fabricate a tool. I had to fabricate this from raw steel.

Nicely done Don. A great puller made from simple materials and great know how. I might attempt to put one of these together myself.

You are the best handy Andy man I've seen . Great video!!! 👍

It's good to see someone make tools and utilize their slow time soon enough everyone will Bring in the mower for start season

I bought a rather large Craftsman Bearing Puller back when Craftsman was sold at Sears and Craftsman quality was the best it's ever been. I hadn't used it much, but it came in handy pulling tractor mower spindle bearings, at least the one I could get out. The other wouldn't budge, no matter what I tried. I was adding Zerk fittings because these had no way to grease them. I wanted to get the bearings out to to be able to easily get all the drilling debris out from inside, not to remove a seal from one side. A KZreadr made a video proving that the grease still comes out of the outside seal, and disassembled the spindle again, and popped a seal to show that grease did get inside to protect the ball bearings, even with both seals on both sealed bearings. I don't have a welding machine, but it sure is cool how you made that one! Thanks, Don. You're the man.

I am following you for years now. You are great!!! Greetings from Greece

Your skills with tools is awesome. Keep rocking.❤

I would say that would work just fine... for small engines. Good job.

Amazing Jig you came up with dony one of my favorite videos you posted. hope to see more of your future genius diy work on making engine dismantlement easier in the workshop!

Very helpful video as always. Thanks Don!

Excellent video Don, thanks for sharing and keep them coming.

Muito interessante Parabéns 👏👏👏

Muy buena idea 💡 👍. Algo que se puede hacer rápido y resuelve el problema.

Thanks alot donyboy I will make them next weekend project, one regular and another small one for small bearing, but I will use at top a socket with rachet to ease the force apply, keep it up and GBY

Nice plan Don. Quick and easy.

Brilliant.....bloody brilliant idea....thanks for the video bud...

Handy little puller👍nice job

Beautiful free-hand work!!!

That's a really cool design!

Very nice. I was just looking at bearing pullers last. There a bit spendy, more fun making a set.

Next time we want a NO TOOLS REQUIRED make your own bearing puller. 😂

@donyboy73

Жыл бұрын

haha yes! Bare hands!

Brilliant job! Big thumbs up!

Nicely done Don.

I really enjoy your DIY video's, your fab work blows me away, but for my skill level it's a Harbor Freight gear puller $19.99 - $21.99. Keep up the great work.

Very good design, I might make one. Next......a slide hammer, that indispensable tool for any workshop. Thanks for sharing.

Wow, fancy! Nice project!

Well done.

That is awesome!!!! Great job!!!!!

I’ve watched many of your very informative videos Don, didn’t know you are a manufacturer too! (Wish I had a welder!) Great video, thanks!

Great Video , Great project to do , it’s now on my to do list

Nice job that was close to how I built mine.

Awesome build. Donny

You made my day, could even make it a 4 hook puller. I was thinking of making the hooks red hot and dipping them to harden them too. Please tell us what oil you used here.

آفرین بر شما.. خلاقیت تون عالی بود..❤❤❤

Great job

Creative idea man

Nice job.

Looks great

cool Video Just my luck I have had gear pullers since 1990 2 and 3 arm . I have blind hole bearing and bushing puller . along with taps for pressing out bushings . Never toss out old taps when they no longer cut threads they can be used to remove bushings .

Para qué sueldas esa barilla roscada con la tuerca si vas a terminar sacando la soldadura con el disco abrasivo?

Good job 👍

Muito bom parabéns 👏👏👏

Awesome invention and even more awesome way to make a video!

very brillient

Awesome job Don! My DIY tools don't have nearly that superb fit and finish. I almost expected to see open toed sandals on a dirt floor. 😂

Very clever !.

very ingenious🎉🎉🎉

Nice tool

Don, vous êtes un vrai artiste !

@donyboy73

Жыл бұрын

Merci

Pretty cool !!😊

Wow Don! You've taken your game to a whole different level. Beautiful job!

I made many special tools myself. If you have real good metal on hand to work with. Some are better than you can buy.

That is wicked

Super robota

Now I have to buy a base grinder and welder. 🥴 Always wanted them. Might be about time now.

Admire your work manship lm a welder here nice job John Possi Papua New Guinea

Hi sir please tell me what amps you used for welding please thank you sir 🙏 amazing video 🙂

Brilliant bodge. My only concern is the bolt heads cut into L shape. Is it a risky weak point? Would hardening help? I wouldn't want to see a setup go 'pop.' Bolts are made to be strong there, I'm just excessively safety-OCD.

Donyboy going full MacGyver !!

U sure good at manufacturing stuff

Really nice DIY stuff 💪🏻. Greetings from Denmark 🇩🇰

@donyboy73

Жыл бұрын

Greetings from Canada

I have left a note for the person who cleans out my shed when or after I die. I draw his attention by saying initially, "Its called Improvisation". He will find an 'Aladdin's Cave' of wonderous engineering as he begins to remove one thing after the next. Some he'll even pass on down to his Grandchildren. I bet people cleaning out your shed would find very much the same....

You're quite the crafty feller

👍👍👍Thank you 👏

Very Cool , now if I only had a welder

Creative genius. My brother is good at this sort of stuff. Myself to a lesser extent 😁

Well Done ! 😃👍

@donyboy73

Жыл бұрын

Thank you! Cheers!

Nice

Ya see. Now yer gittin' all crafty and creative on us! But Iike it!! Good job!👍😁

@donyboy73

Жыл бұрын

Thank you! Cheers!

@justincase2281

Жыл бұрын

@@donyboy73 You're welcome. And cheers right back at ya.👍🍺

I like this homemade tool stuff, keep it up.

@donyboy73

Жыл бұрын

More to come!

@knighthawk86855

Жыл бұрын

@@donyboy73 excellent.

Nice 👍🏻

👏👏Nice one 👍

Hello Don, Nice job. If you got some basic tools like a welder and a grinder and some scrap steel, you can usually make the tools that you need. I think alot of this ingenuity is lost due to the availability of cheap chinese tools. Of course the Chinese tools have their advantages too. What is that little grinder your using with the roloc flapdiscs?

Cool 😎

Very nice job. Shouldn't you have used grade 8 hardware ?

shh,,, you're a wizzard man with the magic hands wow ! ( I'd like to try but not sure to have your skills to make the 2 pulling legs ?! )

I guess you do not have a Harbor Freight there? I purchased a set of pullers at a yard sale a few years ago for $5 and they work great. I know they came from H.F. but sufficient for what I do. I did find this video interesting. I hate making tools if I do not have to. I found I had to working on lower end units for outboard motors. Seems every model requires a special puller. I threaded rod with various sized washers worked just fine. I got out of boat motor repair due to limited yard size. I do not want a bunch of boats in my yard and neather did the neighbors.

@donyboy73

Жыл бұрын

I got out of boat repair as well, such a pain getting parts here

What did you heat the tip of the screw and dip it into? What's in the glass? ❤

@onlyhuman5

Ай бұрын

He turned the screw tip into tempered steel. By high heat and water.

there is actually pullers cheaper than the material wasted on this craft,, but enjoyed watching it all the way thanks..

You had the music right. Where's your sandals? Lol

Awsome db73, but there is a danger that you but tool manufacturing companies out business in that phase 😃😃👍👍

once this was a normal thing to make your own tools , with declining economies it will become normal again

Why do you make your own pullers? Make a cub cadet 3x 28 conversion kit to 2 x

Vidanın ucunu ısıtıp neye batırdınız. Bardak daki nedir.

❤❤

If your sellin I’m buyin

I miss my brother building all kinds of special tools, he was really good on lather with no training

Dony, have you done a video explaining why can mower engines are no longer be marketed in horsepower? I've seen some very poor attempts at explanations online. You could do it better.

Когда много свободного времени, можно заняться этим😅

@voronezhpokos

Жыл бұрын

@@Rein_Ciarfella когда нет денег, лучше их заработать, чем заниматься этим

Nice work but can I make a suggestion regarding safety ? You shouldn't wear gloves when operating a bench grinder because if they get jammed up in the grinding wheel that can pull your hands into the wheel & rip your fingers off. In every workplace that I have worked at wearing gloves while operating a bench grinder is a no no !

Dipping into the oil makes the metal hard basically it is Case harden

@mannys9130

Жыл бұрын

Right, that's the point. The tip of the puller shaft will be spinning and pushing into a hard shaft to pull the bearing off, so it needs to be hard in order to not smoosh and gall and mushroom after the first use.

@robertmailhos8159

Жыл бұрын

@@mannys9130 thanks for the info on this matter young man 👍😎

কই পাব

pretty cool. but after all of that, i'd rather just buy one.

That Cant Work.. in Drum Motor Cycle 😂😂

With all the time and effort used in making this, wouldn't it just be easier to buy one online ? Just saying.

Donny, Stop It !🤣

@donyboy73

Жыл бұрын

I'm addicted!

@lilo2469

Жыл бұрын

👍