Diy Glass Aquarium Lid - How I Made Sliding Fish Tank lids for my Fish Room
Үй жануарлары мен аңдар
Here are my DIY glass aquarium lids and how I made them! They're sliding lids and I made one for each tank in my fish room. This is part of the "fish room beautification project" that I've been working on, I should have done this a long time ago!
------------------------------
► My Website! www.simplybetta.com
► Patreon! / simplybetta
► Instagram! @simplybettafish
► Discord! / discord
► Tiktok! @simplybettafish
------------------------------
Пікірлер: 483
What do you think, did that improve the fish room or what? Here is the link to Steve Poland Cichlids’ video that I learned from kzread.info/dash/bejne/qZyr08asdpetmaw.html
@bmob4661
5 жыл бұрын
Simply Betta great improvement can't wait to see more. I did not know this diy so thx.
@AquaPeet
5 жыл бұрын
Did you glue them down or just set them on top of the rims?
@SimplyBetta
5 жыл бұрын
@aqua peet Just set on top so I can remove it if I want to
@peculiarone339
5 жыл бұрын
Cool idea!! I should make these, I'd be devastated if one of my Bettas jumped!! I do have a TON of floating plants but I guess it could still happen? I'm confused as to how you get the handles to stay on the glass?
@GirlTalksFish
5 жыл бұрын
@@peculiarone339 I think the handles have an adhesive on them 👍
Thanks for the shoutout! Glad this worked out for you. Painting them black was a nice touch.
@SimplyBetta
5 жыл бұрын
And I'm loving them so far. I don't miss my old crummy lids or my saran wrap and tape - hah!
This is the best looking result I've seen of the corner moulding videos. Thank you for making this and caring about appearances!
I love the sliding lid! Ive been searching for a good lid idea that is easy and functional yet appealing.. Thankyou!!
Awesome simple solution! Thanks for sharing Taylor 🤗🤩
The best part of fishkeeping are these improv ideas that are being brought to life - and it's getting betta everyday! This is an awesome tip! Cheers!
Thanks for passing along this great DIY lid...👍👍👍👍
Awesome DIY project! Loved it
Love them, what a great idea 👍🏻
Superb. Definitely doing this with my juvi tanks. Thank you to you both.
This is fantastic! Simple, yet, incredibly effective. I have been looking for an affordable way to make a lid for my aquarium, as mine is such a pain to get into, so I will 100% be trying this out! Thank you 😁
Gorgeous! I love it.
Great idea. Love the way you edited the video to move it all long quickly!
awesome project! looks pretty straight forward which is my kind of project!
great job! they came out so clean. might have to try this
You did a thing. A super useful, amazing thing. Love it. Great job. Thank you for sharing this tip and trick.
This is such a great idea! Thank you for sharing!
Loved this video! Fun and easy to understand :) guuurrl omg I know all about the struggle of breaking a nail! It's sucks AND hurts!! Can't wait to watch more of your videos 😀 👍🐟♥️ so glad I found your channel
Everything sure does look a lot betta now.
@Passion_Bassin
5 жыл бұрын
Ahhh, I see what you did there. LOL
@aprilshowers6102
5 жыл бұрын
Hehe cute!! Was going to say... I see what you did there.... BUT someone else beat me to it!!! Lol
Love this idea! Thanks for sharing!
That’s really awesome! Thank you for sharing!
Nice DIY project. Turned out great!
Love those lids!
That's really cool and a good idea, I love it
That's such a creative solution
Looks nice , great upgrade.
BRILLIANT!
DIY awesomeness thanks for sharing this!
Love this idea thanks for sharing
Very creative n thanks for sharing your technique. Keep it up.
Awesome, thanks so much for sharing!
Cool and helpful video! Steve Poland is the man, thanks for passing along!
Wow .. Very simple and nice .. Tks for sharing
Looks great
What a nice idea 👏
I love this lid system.
@SimplyBetta
5 жыл бұрын
Thank youuuu
I've recently mounted an 30L fish tank for a Betta and I built a system similar to yours inspired by this video. It turned out much prettier than I expected, thank you so much! Greetings from Portugal! Love your videos!
@SimplyBetta
4 жыл бұрын
I'm happy this video was useful for you! :)
This is absolutely ingenious!!! I have not seen any other build a diy lid like you have here. Totally going to do this from now on wow!
@SimplyBetta
5 жыл бұрын
Appreciate it!
This is an awesome idea
Easy way to do it.. thanky so much for sharing
Great idea!
Awesome DIY! Thank you for sharing :)
This is so awesome
Way cool! Thanks, Chris
Good video. Lids look great.
That looks nice.
You don't know how long I've been waiting for someone in real life to say "I just broke a nail".
Glad I saw this, I just got a bunch of glass to make lids for my tanks, I was just going to have two pieces sitting on the rims but now I'm going to do this!
@SimplyBetta
5 жыл бұрын
Oh good I’m glad! The ease of sliding is so worth it
Great idea 👍🏾
great project!
Thank you so much for sharing this video with us. That design is awesome! I have no doubt that this will catch on with many fishkeepers who had run into the same issue you did. The videos you made for the big fish event in New Jersey looks great. Many of my friends who went raved as to how good it was. Some said the Bettas displayed there were AMAZING! I also heard that Joey Mullen (The King Of DIY) was there. I hope you had had the pleasure of meeting him as he's an inspiration to the fish hobby and a great guy, too.
@SimplyBetta
5 жыл бұрын
Thank you for watching that! I hope these kids can help people too :)
Thank you for posting your video. I was looking for an inexpensive way to make a nice looking lid. I used the same plastic material (bought at Home Depot) you did and I spray painted it with flat black acrylic paint. Then to prevent the paint from being scratched off, I applied black electrical tape to the top of the plastic piece where the glass slides back and forth. Works great, easy to do, and inexpensive. $2.50 for plastic, $25 for the 2 pieces of glass cut at a local glass/window making shop. Instead of attaching the handle to the glass, I used the same plastic material, spray painted it flat black, and then cut 2 pieces of plastic. One to fit the front of one piece of glass, and the other piece to fit the back of the other piece of glass. This way the front glass can slide backwards, and the back piece can slide forwards. I glued the plastic to the glass using Gorilla super glue. Now easy to reach inside the front and back of the tank. You can use a hack saw, or fine tooth saw to cut the plastic... or a sharp utility knife - box cutter. Use sand paper to smooth off cut edges. Looks nice and professional. Any color paint can be used to match your aquarium trim.
That looks awesome!
@SimplyBetta
5 жыл бұрын
Thanks!
i love these lids
I had seen this before but lost the link. Thanks for showing it and telling where you found it. I really appreciate all your work and effort which goes into these vids. I've learned a great deal about bettas from your channel. Thanks again.
@SimplyBetta
5 жыл бұрын
Thanks a bunch! :)
Nice as always 👍
Cool video. I think I am going to have to make several of these.
The lids look great! I may have to try that as well. 😃
@SimplyBetta
5 жыл бұрын
Thanks a bunch! I’ll be doing it next for some 40 breeders and 75g I think :)
Excellent video
Love these!!!
@SimplyBetta
4 жыл бұрын
They're great!
I never thought of that. Thanks for sharing 😍💛😍🙏😊❤️👍👍 gooooddd vidioo
You’ve inspired me to consider getting a Betta for my office! I had 2 Bettas when I was in high school, but as the two Bettas within 4 years would suggest, it was a shameful time, full of lots of misinformation and likely some suffering fish. 😥 I feel like I need to make amends with a properly sized tank, real plants, and a reputable breeder this time. Thanks for your videos! I absolutely love them! ❤️
I really enjoy your videos!!!!
@SimplyBetta
3 жыл бұрын
Thanks so much :)
Oh you are fancy now! Lol. Great video and love the lids!
Good idea!
that is awesome
I love this kid setup, I've done it in the past and definitely need to do it again as I work on our animal building
@SimplyBetta
5 жыл бұрын
Thanks, I’d recommend it!
Awesome video loved the diy glass lids brilliant actually!! Much love and aloha 🤙🏽🐠🤙🏽
@SimplyBetta
5 жыл бұрын
Thank you!
I love your bettas! They r so pretty :)
@SimplyBetta
5 жыл бұрын
Thanks!
Great video I was looking for a way to make some DIY Lids that look nice
Awesome Project and looks fantastic
@SimplyBetta
5 жыл бұрын
Thank you!
I like your shoes! Great ideas!
So glad I came across this video! It's so much more convenient, cheaper AND looks a lot better than the store bought lids =D Good thinkin'! =)
Nice job!!! Fishroom beautification and function.
@SimplyBetta
5 жыл бұрын
Appreciate it! Time to outfit my bigger tanks like this too :)
Love it
Thank you for you tips! I'm a begginer with no expirience at all and when i decided to get a tank i got the guppies and its going pretty well. I think im ready for saving my first betta:)
@vinceolshove1499
5 жыл бұрын
I think by your post you mean "saving a betta from the cruelty of the big box "pet store"". Terrible the way they get treated. For every one we save into good homes they will bring in two more...it sucks. I am getting tired of putting new 5G tanks or 20G sorority tanks all over the house to save them lol.
Aww, those little guys curious about your fingers at the end were so cute!
@SimplyBetta
5 жыл бұрын
Haha thanks, they’re fearless little fish
NICE JOB
THANKS SO MUCH👍
I am so glad that you did this! I love DIY and this hobby gets so expensive
@Made4more1432
5 жыл бұрын
Can I ask where you ordered the glass?
@SimplyBetta
5 жыл бұрын
Thanks! I ordered the glass from my local glass shop
Genius!
Good one 👍
cool project.
Very nice and neat and practical!! Thanks!!
@SimplyBetta
5 жыл бұрын
Glad you liked!
@guppypuppies9974
5 жыл бұрын
@@SimplyBetta I will be turning my garage to a fish room soon. Definitely am going to use these DIY lids!
Hey 👋🏻 Thanks for the tip I’m going to have to try that!
@SimplyBetta
5 жыл бұрын
Mah pleasure
Your videos are my favorite on KZread ❤
@SimplyBetta
5 жыл бұрын
Aww
Great vid!
@SimplyBetta
5 жыл бұрын
Thanks LRB!
great lids
@SimplyBetta
5 жыл бұрын
Thanks!
thanks !!
I made these lids after seeing your video. The glass lids look so cool now that I can see all my fish from above. Anyone who wants to try it yourself I’d recommend going to Lowes for the custom glass. If you buy a panel of glass from them they have a free cutting service. I bought a 16X20 for only like $8. (Just make sure you account for the molding in the cause I didn’t and had to go back to the store and ask them to cut the glass just a bit smaller so it would fit on the tank). Also I found you can just use a permanent black marker for the molding if you don’t wanna use spray paint on the molding.
@emihayashi7725
Жыл бұрын
What width did you remove from the glass for proper fit? ¼"? ½"?
The part where you used the plastic part was from DIY King Joey. I watched it a few weeks ago. Because I was wanting to make my own fish tank.
Very interesting I might try these when I get the chance to build my first dedicated rack of tanks
@SimplyBetta
5 жыл бұрын
I think its worth the investment!
I LOOOVE watching you!! ALWAYS HAVE TO WATCH every video when it comes up! My whole day gets thrown off if I DON'T! (OK SOOOO A teeny tiny bit of exaggerating BUT shhhhh... Lmao) ;-) ;-) I ENJOY watch your videos tho!! ;-) I find you VERY entertaining and educational!! Xoxoxo from a woman in halifax nova scotia thats dying to get into the aquascaping/having fish lifestyle and zero funds to do so :-/ Well that ended on a depressing note... DID I say how much I LOOOVE YOU, YOURS & and YOUR CHANNEL!?! If NOT... I looove all of those A LOT!!! Wow this comment has REALLY GONE sideways!!
@SimplyBetta
5 жыл бұрын
Haha just a little sideways! Thanks :)
Wow that's really cool. I've never seen that before
@SimplyBetta
5 жыл бұрын
Glad to spread the word!
fancy new lids
What a great diy! It looks so neat and professional. I might try that out when I need new lids. However, I'd skip the spray paint, too worried it would end up in the water somehow.
@SimplyBetta
5 жыл бұрын
I've been told I should have used a different brand of paint - krylon is where its at.
@DiannaAngela
5 жыл бұрын
@@SimplyBetta I'll have to check that out 😊 but it's also possible my father-in-law can get me some black moulds.
Open hot dog style 🤣 like the idea of the lids! Great video 👍
Nice video
Howdy! Wow! That was so cool! Real easy to do! I like the handles! Have a great day! :)
@SimplyBetta
5 жыл бұрын
Thanks a bunch!
Cute ..… I love them!!