Love it, I've been using ine if these to lift wall on my building site

Do you happen to have a parts list and how to build video? Thank you!

@mmace3

14 күн бұрын

Very close design. kzread.info/dash/bejne/X4aNycaEZa3Sk7w.htmlsi=qP2NJdoFOCEClLwR

I need to know how to build that in my house whwrw there live persons with disabilities.

من راد مثل هذا المصعد كيف يجده ؟

Где схема?где видео о том как работает и как устроено?

Суперлифт для частного дома!!🤩👍👍👍 БРАВО! Это самый бесшумный самодельный лифт, что я видела на Ютубе! 🫶Скажите, пожалуйста, какой подъёмный механизм использовали, и где его установили - может, на чердаке? За счёт чего он так тихо работает?👌👌👌

@LucasLopes-wh3rr

11 сағат бұрын

🇧🇷 essa estrutura deve aguentar quantos quilos?

add some angle alu on the back wall with some slots cut into it and some magnets on the lift and you have an eddy current emegancy brake if the cable snapped

Would really want that pulley styom in my house

Hello super achievement of freight elevator I am in France and I would like to know where I can find the rail fixings please

@crturpen

8 ай бұрын

Grainger.com or Zoro.com

Qualche dispositivo anticaduta non sarebbe male

i can not obtain 12 gauge unistrut here, only 14 gauge, for a 400 lbs 9 foot stuff elevator, would this be a risk versus 12 gauge?

@crturpen

23 сағат бұрын

@@Cinepobrefilmfestival I did not use unistrut. The rails are barn door tracks.

What rail did you use and how far is the plateform from the wall? Thank you.

@crturpen

3 ай бұрын

Back of platform is 5 inches from finished wall

Nice! Do you have a link for those straps you used to attach the strut to the wood?

@crturpen

10 ай бұрын

www.grainger.com/product/GRAINGER-APPROVED-Overhead-Bracket-Single-Box-4PE66?opr=HPRVP www.grainger.com/product/GRAINGER-APPROVED-Track-Sliding-Door-4PE53?opr=HPRVP Barn door hardware not the unistrut you see in the other videos

@tw6086

9 ай бұрын

@@crturpenu

@terrijuanette486

6 ай бұрын

@@crturpen Do you have a 'this is how I did it' video?

@crturpen

6 ай бұрын

@@terrijuanette486 No, Sorry. Make a straight vertical line with a long straight edge or chalk line. Slip all of your brackets over the rail. Align rail with line. Put a strap at the top of rail to hold in position but allow for play. Starting at bottom secure first bracket keeping rail aligned. Work your way up spacing brackets at 24 inch intervals. Keep rail on line. Other rail should be made parallel to first, keeping distance between rails the same. If you need to join rails just put the bracket over the center of joint. There is a 3/4 inch spacer board behind the rail cut to space the brackets. This puts tension between the rail and the surface you are mounting it to. Without these spacers you rail will move in and out in the bracket. Hope this helps.

@crturpen

6 ай бұрын

@@terrijuanette486 NO Sorry

Beautiful. What is motor name and hp?

@crturpen

Ай бұрын

Brand is Vevor. Available on Amazon. But you can use any wire wench. Mine is rated at 1100 lbs with single cable, 2200 lbs if you use the pulley

@taylordurdon4873

Ай бұрын

@@crturpen thanks mate

Hou to bouild

नम्बर भेजों

Magkano daw pakabit 3rd floor

@CaloyDiocos

2 ай бұрын

Kailangan ko po

Nice !! Looking at doing this same thing ! How much weight would you think this supports ? Thanks !

@crturpen

6 ай бұрын

The winch is rated at 2200 lbs. That is with a snatch block doubling the cable. I have the cable direct to the platform so 1100#. Rails and wheels are rated at 450 lbs. If to do the math and work out the moment arms safe to place 1100 lbs distributed over the platform. Since the upright of the platform is longer than the one perpendicular to the wall by a foot you could lift 600 lbs on the outer edge without exceeding the limits of the rails and wheels.

@saidumv

Ай бұрын

Please provide your contact number ..