Thanks for the video it was really useful

WELL DONE !

Damn , Thats Impressive , your a smart dude!

Thanks for video. It was useful

Very impressive!

This is supper impressive.

very cool and good to know there is a way to use the THC logic when converting to laser.

Eres un crack

really impressive, im build my first CNC Plasma table but has wondering if it isnt better to start off with a fiber laser.. haha ;D

Good work plase make video on wiring digram and component used

Thank you for sharing this Tamar Bar! This is incredible! What are you using to post the g code? Sheetcam? also what thc were and are you using?

I have the centroid acorn 4 teknic clear path servos. I originally intended to use them to build a cnc router but after seeing your video, I think the job I intend to use it for would be better suited on a fiber laser. Would you consider making a build guide? Cheers

Hi very beautiful conversion , may i ask what is the amplifier type and thanks a lot

Manual focus head? I've been looking around and no controllers available for auto focus heads other than the expensive FScut ones. I want to build my own table but need auto focus. Good job on the machine.

Hello, good video, what parameters and gas do you use?

Hi. You built a great machine. I want to make one too. Tell me, do you have servo motors there? What power? How to keep the dimensions on these construction profiles. Regards

Saw you post something on Ninjas, was thinking man i really wish he had a KZread series on this.... days later, I find this! good job dude. How much was the Raycus 2kw source?

Very nice machine build. I am considering a laser conversion now that I have seen yours and a few others on the tube. I imagine budget was a consideration in selecting a 2kw. Assuming a larger budget, would the table dynamics preclude a 6 Kw conversion? We'd go with a high pressure air compressor. Again, nice build.

@TAMARbarCNC

9 ай бұрын

First of all thanks man. If you want to consult with me I'm happy to help you. Available on Facebook as "tamar bar"

Hi, nice build. I have a plasma cnc as well, and the cut quality is not the greatest, especially cutting small things. I'm looking to do a 2kw laser source as well. What controller do I need. Do I need a thc like a plasma. I'm not sure of all the components I would need,thank you.

Class build! Could i ask, what software are you using to program this? Both on the sheet and the tubes. Thanks

Very cool! How much did you spend?

Share laser connection diagram and schematics ....really impressive

@aamirzaheer04

11 ай бұрын

Specially the laser head and source with acron THC

I'd like to see real speed footage of this. Nice Build.

@TAMARbarCNC

11 ай бұрын

Sure, I will upload more videos soon

Is your 2kw fiber laser 8s single phase input power?

About how long does the oxygen tanks last? Any chance of sharing file for the rotary tube chuck? Impressive build we have chatted on fb centroid fourm.

@TAMARbarCNC

11 ай бұрын

You mean the front chuck?

@joesmith2465

11 ай бұрын

@@TAMARbarCNC yes the one with rollers

What is the model of the laser head capacitive sensor amplifier?

Hi, very nice build, can you give some consulting?

Was the base of the machine a DIY build or is that something you bought?

@TAMARbarCNC

Ай бұрын

I've built it, it's based on avid cnc design m

Hi is it possible to use Masso G3 controller on the laser that you use?

@TAMARbarCNC

7 ай бұрын

Yes

@robinenriquez2887

7 ай бұрын

@@TAMARbarCNC Can you share your plan of your 4 sxis rotary. The rotating mechanical with roller that holds the pipe that is attached on the gantry.

Wiring difference bw fa cut 1000 and mech 3

Good Job.which THC did you use to send the analog signal?

@TAMARbarCNC

3 ай бұрын

It's a controller kit from centroid. It's called centroid acorn plasma 4 axis controller

@alexdias50

3 ай бұрын

Are you using LFS PM T43 or LFS AM T43 for head sense?

@TAMARbarCNC

3 ай бұрын

LFS AM T43 AP01 S

@alexdias50

3 ай бұрын

Thank you very much Friend.

@alexdias50

3 ай бұрын

Have you used LFS controller?or it's a direct output from amplifier?

What is the model of the plasma table?

@TAMARbarCNC

11 ай бұрын

What did you mean which model? It's a machine that I've built based on avid cnc machines

I want to try and build this.

@TAMARbarCNC

8 күн бұрын

@@justintupicruz6324 are you interested in building the plans?

@justintupicruz6324

8 күн бұрын

@@TAMARbarCNC That would be amazing if you have them .

@TAMARbarCNC

7 күн бұрын

@@justintupicruz6324 sure. You can contact me at my email zeusgripss@gmail.com

@justintupicruz6324

7 күн бұрын

@@TAMARbarCNC sending now

do you remember me

@TAMARbarCNC

4 ай бұрын

Of course man, your my inspiration.