That screwdriver being levered on the swing arm must have caused a collective "NOOO" on the Internet!

@stevecade857

Жыл бұрын

It did from me, even the non damaging first time.

@TheMissendenFlyer

Жыл бұрын

Yes when I edited it back I thought the same!! What I do for entertainment!! (Yeah right!!)

@SteveInskip

Жыл бұрын

The nation held its breath! 😉😁

@BlackdogADV

7 ай бұрын

What brand and size of the rear tire?

@dianedownie5951

5 ай бұрын

The chuckle brothers.😂

Morning Andy I think it may have gone easier if you had removed both the old shocks before attempting to fit the new ones. That way you could have used the jack to adjust the height and thus the angle of the swing arm to match the length of the new shocks without having to compress them.

@cedricpieterse7280

Жыл бұрын

Nope. Andy did it exactly how it should have been done by a novice. He now has earned his QBF. Qualified By F-up

@philako6160

Жыл бұрын

I second this, haven't done this for many a year but that's how you do it.

It’s always reassuring to see that it isn’t only me who sometimes finds things don’t go exactly to plan. Smashing honest video.

@Ze-Germanzuk

Жыл бұрын

It's not DIY unless you spent double the expected time in the garage and throw at least one spanner at the wall 😂

@justinmckeown9029

Жыл бұрын

I’m on week 2 replacing a shock on a BMW X3. You’re not alone.

@commander_lard

Жыл бұрын

I'm happy if I can complete a task without having to go out and buy a tool that I'm missing :)

It’s like looking into a mirror watching you do the shocks. So many times I’ve tried a job that’s theoretically simple, and it turns into an all day nightmare😆 Interesting how big a difference the shocks make to the comfort!

@TheMissendenFlyer

Жыл бұрын

Thank you Freddie - that makes me feel much better! ….and yes, what an improvement to the ride!

@ianwarren8316

Жыл бұрын

Amazing how long it took me to take the fairings off my Panigale V2 and put them all back on perfectly aligned! Best part of four hours I recon!

Thanks for sharing Andy, this is a life changer for our amazing RE bikes, I will try to get one of this to my continental gt. Thanks for sharing your experience in replacing and riding this new shocks!

Great to see such an honest video as I think we have all been there. We think it might be an easy job and then we do end up getting stuck or wishing for some help. Scratching the swinging arm was the best example of how we learn things by doing them ourselves.

Hi Andy, I am sure most of us if not all of us have at one time tried to do something on our bikes and had a minor mishap and caused some damage. I think it's good that you included the part where you scratched the swinging arm as others can learn from this. A lot of KZreadrs would have edited that out, so thanks for being sincere. A very helpful video. Don't forget to patch up the paintwork :) Sandy

@TheMissendenFlyer

Жыл бұрын

Yes I will - it’s not a big deal and thought it would be fun for others to see me suffer!

@commander_lard

Жыл бұрын

@@TheMissendenFlyer always nice to see people are human! I'd count myself quite handy mechanically... didn't stop me from accidentally removing a chunk of lacquer from the fairing of my new R1250RS last summer when simply taking off the decals! - a black enamel touchup pen will sort yours out no doubt!

@hulkhatepunybanner

Жыл бұрын

*"Now I know it's mine," is what I say when I put a dent or scratch on my machines.*

@michaelmclarney1994

Жыл бұрын

@@commander_lard I agree, we have all made mistakes and it's great that Andy included his and I hope it doesn't deter from future spanneribg efforts. I do all my own work and it's so satisfying to see a job well done but it has taken me years to build the knowledge and skills, and the never complete tool kit 😂

@ianwarren8316

Жыл бұрын

Not yet I haven’t. Repaired some damage on my first gsx-s125 dome but the previous owner crashing but not done any Mai the car damage beside replacing one bolt on a Honda CBR650R who’s Allen head was made of cheese! Just had all the fairings off the V2 and found a bolt the dealer had lost as plastic washer off but again all went back together properly without a scratch!

When you're using a screwdriver to lever something always a good idea to put some soft material around the end of the screwdriver in order to prevent a scratch occurring, bit late in this case but good to know 👍

@TheMissendenFlyer

Жыл бұрын

Well if you notice prior to that mishap I was doing exactly that!

@geoffozevans4500

Жыл бұрын

@@TheMissendenFlyer 👍👍

@seayak

8 ай бұрын

And... Use a small pry tool with a bent end, instead of a screwdriver for jobs like this. If you use a screwdriver in this way you risk doing exactly what you did..

Good on you Andy for having a go,it’s how we learn,KZread is your learning companion at times, very handy to have knowledge of your bike; on a side note I live in Australia and last year I spoke to the boys at Hagon, as you said more than helpful and so knowledgeable, put their shocks on my Triumph T100 Bonneville, completely different bike.

It's good to see other motorcyclists who have as little mechanical skill as I do! Great video Andy, the bike sounds amazing too. Love how excited you got seeing that shock sit home. Cheers!

Andy, you forgot “get in there, ya bastard!” Works for me.

Great bits of kit these Hagons, so glad you like them. 👍

Fair play Andy. Admire your honesty and learnt something.

@TheMissendenFlyer

Жыл бұрын

Thank you!

Lovely to see. Most youtubers would have either edited that out or not put the video up but as brutal as it was to see it is an honest warts and all video which will help people withe their own bikes so thanks for posting it.

@TheMissendenFlyer

Жыл бұрын

My pleasure (and my thoughts exactly)

Well done Andy! Theres no shame in not knowing what to do or getting stuck, you had a go thats the main thing & ask for help when unsure. 100% mate. Even us experienced tech's have to learn somewhere, no one gets it right 1st time all the time. You learn from having a go! 🙂My tip would have been to remove both shocks together, and as you're buddy did, bottom or threaded end 1st, then a tiny squirt of silicone spray would have had the top slip on. This doesn't affect the rubber bush, just aids installation. Shocks look good & seem to be a good fit financially & physically. I rate Hagon. Nice 👍

A center stand is priceless for a motorcycle

Local 'poundshop' had Tipex correction pens/sets which is ideal for marking any nut/bolt/fitting and easy to see if anything is coming loose. I did wince before the damage and wondered what would get caught first, paintwork, wiring or brake pipe, glad it all worked out in the end.

Well mate it just goes to show that things don't always turn out as simple as they look. Shame you damaged the paint work but as you've said it's more a point of horse's for course's with certain things so they are best left to those with experience. Thanks for the video always nice to watch.

Hi Andy, I've (had) fitted Hagon shocks to my classic VFR and Fireblade and as you say great for road riding, transformational.

Great honesty here and job done too.

@TheMissendenFlyer

Жыл бұрын

Cheers Chris!

Thanks to Nigel for his kind assistance. While y'all were wrenching on the shocks I was admiring those tires you have on the RE. I need some off-road tire options for my Super Tenere. I think some similar tread would work nicely for some moderately unpaved road riding I want to do in the future.

You give it a go Andy and now you know it's all a learning curve , job done and knowledge gained good day at the office I'd say 😉👍

Well done you! nearly 😄 fair play on being so open and honest. I was screaming at the screen when you started to lever the shock against the swing arm🤷‍♂️ Please do more maintenance videos or additional part fitting, we could all do with a smile now and then in this day and age Cheers 🍻

@TheMissendenFlyer

Жыл бұрын

Glad you enjoyed it!

Absolutely love my Hagon Monoshock and Progressive springs. Totally changed my handling for the better too.

Well done Andy good honest video we have all been there and will I'm sure have further times of fitting parts that test us all.

@TheMissendenFlyer

Жыл бұрын

I wouldn’t mind but it’s every time for me!!

Glad you made such a big improvement 👍

I love watching watching you work on a bike. A complete antidote to watching Allen Millyard and Dave Mitchell (The Classic Motorcycle Channel) who both make me seem a complete buffoon, whereas you make me feel quite competent. Well done for trying and being so honest. Great stuff!

@TheMissendenFlyer

Жыл бұрын

Glad to help!

Reminds me of my apprentice mechanic days, I'd see the senior mechanics doing jobs that looked easy , I'd be given the same job , and think this will be handy, but you'd always have something and normally something unexpected giving you trouble, never be afraid to ask for help or advice my chief mechanic would always tell us. Because everyone in that garage would have had something similar and even the most experienced will tell you, you are always learning some new problem will always catch you out. Good video mate

@TheMissendenFlyer

Жыл бұрын

Cheers Martin - appreciate that!

I have made all those same mistakes, Andy. These days if I have access to a jack, I pull both shocks (when applicable) and adjust the height to match the new stuff. And I also use a touch of silicone based lubricant on rubber bushings when I need to push them on, or a small bit of spit will do in a pinch. Always good to have a mate as a backup plan. And every expert I know has a long list of cock ups to become one.

Very interesting Andy. I hope I don't have to do that with my Classic 350, but if I do, I am heading to the shop. Great video, I learned a lot. Thank you ......Sal : )

Nice one Andy, I knew you would be happy with the Hagon shocks, I always have been. They are in keeping with the style of the bike too and in my opinion, look better than the originals. It's a shame you struggled too, my late Father was an excellent, highly skilled engineer and I'm realising how much he taught me over the years, which was a blessing and saved me a fortune too.

Andy, I’ve been in your shoes many a time and it’s nice to see and read in the comments that I’m not the only one. I’ve done many a shock change and don’t always use stock length. I’ve found that taking all the weight off the back and then using a Winbag or Air Shim to fine tune alignment works spectacularly. Great video and sorry about the paint work.

Good on you for trying that's how we learn.

These are the best videos, because most of us can relate to it. We have all been there at some point, I had a huge saga fitting some heated grips once, can’t bring myself to speak of it even now 😢😢. Can’t wait for some more spanner stuff in the Garage.

@TheMissendenFlyer

Жыл бұрын

Yes some you win some you lose don't you.....on balance I seem to be about 50:50 with my spannering!

Nice one Flyer. Good choice going with the Hagons. I have a similar (shrouded) pair on my T100. Quality to price ratio they are a winner and no I didn’t attempt to fit them myself. Good on you for having a go though.

Fair play for having a go. As you said yourself, knowledge and experience are the best tools in the box. At least you tried, even though you admit, to not being very mechanically minded. Good effort mate.

@TheMissendenFlyer

Жыл бұрын

Thank you!

Great video Andy , did make me smile , pleased I'm not the only who doesn't really understand spanners !😩😀👍

Well done on having a go at it yourself. The Hagons are a good upgrade, esp after a few hundred miles when they've loosened up a bit.

Yep we’ve all been there when attempting something. I now wrap my fork legs before taking front wheel off as I slipped with the wrench and scraped my freshly painted forks once

Good to an honest garage video. As we all know nothing ever goes to plan. 👍

Great video, love seeing that bike out.

Glad you got it sorted with a little help from the pros. On critical fasteners like these I will use a little blue Loctite (medium strength thread locker) on the threads to prevent them from loosening off. Especially important on machines that vibrate a lot.

Last time I bought a Hagon was over 20 years ago. Glad to hear they are just as good now.

Oh man. I was cringing SO hard at the metal screwdriver against the swing arm. Then the scratch came in! I actually shouted, "NO!" when that happened! Hope you get the paintwork sorted and matched up! Interesting video! I've done front fork replacement on a Chinese bike that I had, which were simple enough. But damn, those looked proper fiddly! Glad to hear it's had some an effect on the ride! Stay safe!

When I was still a teenager I built a complete bike from several tea-chests of parts (engine already built, luckily). I can't remember how many cock-ups I made but it was PLENTY. A few years later I was confident enough to do engine top end rebuilds. The point is that you don't learn anything without making mistakes. Brave of you to show us your enthusiastic efforts, warts and all. I hope this encourages others to have a go - doing your own spannering is one of the joys of motorcycling.

@TheMissendenFlyer

Жыл бұрын

Cheers Chris - that was my intent on putting this video up, helping other learn by my errors....

Well done Andy. Never too old to live and learn😂. Great video

@TheMissendenFlyer

Жыл бұрын

Cheers Sean, very much appreciated

I joined London Amb Service in 1986,during my training an instructor said "we don't Know what we don't know" that's always stuck with me, good video.

What a brilliant video, honest, funny, and informative, although you did forget to thank Mrs TMF for her nail polish.

I bought some Hagon rear shocks and progressive front springs for my 1988 goldwing, the ride and handling is superb, the staff at Hagon are very knowledgeable and friendly, I'd reccomend them every time 👍

@TheMissendenFlyer

Жыл бұрын

Agreed!

Nice vid. Glad you got it sorted & are happy with them. I think Hagon are the best value new shocks you can get in the UK imo.

...well done sir!.... I'm also a member of the ham-fisted mechanical nightmare club. Nice to see a youtuber that shows the mistakes as well as the victories. Great vid.

@TheMissendenFlyer

Жыл бұрын

I have precious few victories!

It’s on my to do list on my interceptor. Thanks though for another option those Hagen shocks look good and not a bad price either.

Got Hagon shocks on my interceptor. Very happy with the results. Haven’t yet taken blue lettering off but not sure I like how it looks on a black bike. I was told putting them on was an easy job but I know my inner bodge and took straight to local mechanic. Watching your video makes me feel I made the right choice 🤣

@TheMissendenFlyer

Жыл бұрын

You sure did!

Whenever I’ve done those, always found it’s easier to do the bottom then use the lift to help me align the top of the shock :)

When you started levering the screwdriver on the swing arm i had to watch from behind the sofa 😅

@TheMissendenFlyer

Жыл бұрын

Yes I knew the risks as well!

When I did mine I removed both exhausts and the rear wheel and supported the bike on the centre stand. Was a good learning activity on removing and fitting the rear wheel which is a right pain in the proverbial.

@TheMissendenFlyer

Жыл бұрын

Yes way beyond me that….

Nice bike.Sounds good, looks good and now rides good

Amazingly mild expletives when you scratched the swingarm, you are a gentleman.

@TheMissendenFlyer

Жыл бұрын

Thank you!

I Love the looks of the Intercepter. It reminds me of the 70s Bikes that were out. It looks like a really fun Bike to Ride for shorter Trips. I don’t think it would be great for Touring though. Thanks for the Video. I’ll definitely check out Hayden Shocks.👍👍

Thanks Andy for sharing even the difficult parts. My latest “easy job” that took all day was Touratech racks on my GS. Took a full day of swearing.

@TheMissendenFlyer

Жыл бұрын

Glad it’s not just me!

Just spent the weekend fitting an exhaust and still not quite there but its the only one way to learn! I am watching this video while waiting for my mechanic guru to arrive!

@TheMissendenFlyer

Жыл бұрын

Glad it's not just me - thanks for watching!

Well at least you had a go and now we know how it should be done. 👍

Hagon shocks are brilliant value used them for years on all kinds of bikes and never had an issue with them.

Thanks for the vid 😊

This video brought back memories of DIY glory. Years ago I owned a 1981 Suzuki GS 1100E. I decided to swap out the stock exhaust for a set of Vance & Hines 4-in-to-1 headers. "How hard could it be?", I thought. I found out about five hours later. I sure do miss that bike!!

Great video.. glad the bikes handling better.

@TheMissendenFlyer

Жыл бұрын

Thank you Dan!

Great video, did the same thing on my T120 and it was “challenging” as well!

@TheMissendenFlyer

Жыл бұрын

Glad it’s not just me!

There's a certain channel that this will be an absolute joy to ............. this channel continues to be comedy gold............

@TheMissendenFlyer

Жыл бұрын

Glad to help!

love the W/A lens quality and sound on this one Andy.

@TheMissendenFlyer

Жыл бұрын

Thank you…

Good for you Andy, for giving it a shot and you all but had it. Its just a shame someone didn't mention putting it on the bottom and then the top, in all the advice you had offered beforehand. Never mind though all turned out in the end and a much better handling bike to enjoy too

@TheMissendenFlyer

Жыл бұрын

Cheers John - appreciated!

I'm glad to see other "expert" mechanics out there...I have those same skill sets...ha!!!...good stuff - thinking of changing mine out on my R9T....still love the looks of the RE....good stuff!!!

@TheMissendenFlyer

Жыл бұрын

Yes I knew as soon as I made this video all the experts would be out….

@lifesjourneyat50

Жыл бұрын

@@TheMissendenFlyer I get beat up as well my friend....but it keep it real...which is why we watch...because we are more like you than the experts...great job!!!!

@TheMissendenFlyer

Жыл бұрын

Thank you very much - appreciate that.

Great video Andy! I hope this doesn't put you off trying to do bike maintenance stuff yourself. Although it can be a pain....there is something very satisfying about doing stuff yourself....even if you get some help. Glad the shocks improved the handling...keep doing what your doing :-)

@peterwilson8039

Жыл бұрын

TBH, I would always be very careful about modifying bikes. It's got to be expensive and frustrating, and I would imagine it would be difficult to recoup your investment when it comes to selling the bike. But then I'm sure Andy already knows that from prior experience with the Enfield.

Absolutely cracking video, Andy! Sharing the humility of struggling with something and not being afraid to ask for help is inspirational in so many ways. And the fact that Nige got it sorted for you at the end and that you got to have a lovely little ride just before sunset, on a completely transformed bike, with a grin on your face so broad that it was visible through the back of your helmet, well, that's exactly what you deserved. One of your best, for sure.

@TheMissendenFlyer

Жыл бұрын

Thank you - I appreciate the kind comment!

@peterwilson8039

Жыл бұрын

Can't help commenting that Nige didn't contribute a lot. Maybe just a bit more determination. Sometimes a little stubbornness is what it takes.

@TheMissendenFlyer

Жыл бұрын

He has magic hands that I don't have!

Thought i was watching a Laurel and Hardy film for a minute. 😂

@TheMissendenFlyer

Жыл бұрын

Love a bit of Laurel and Hardy me….

I followed the exact same process on my 2010 Thunderbird. Popped some piggy back nitros on it. Had to persuade them with a mallet as well! Good effort Andy! Front forks are next….

@TheMissendenFlyer

Жыл бұрын

Cheers Darren - glad it's not just me!

Mr Hudson is going to have a field day with this one! 🤣😂.. fair play for showing the 'mishap' on camera.

@TheMissendenFlyer

Жыл бұрын

No idea who “Mr Hudson” is but cheers for the comment!

Hi Andy, you must be the best dressed mechanic I know 😂 Like everyone else, things never seem to go to plan or be as easy as we think mate. Great honest video as always. Cheers Jim

@TheMissendenFlyer

Жыл бұрын

Cheers Jim!

I love Hagon shocks. I've fitted them to my Harley sportster. URAL 750. BMW R80. Plus a couple of other bikes. I thoroughly recommend them.

No skin lost or moved, and a minor scratch that can be touched up, not bad! Sometimes even holding your tongue right doesn't work. Thanks to your tech support friend its a done deal.

@TheMissendenFlyer

Жыл бұрын

Yes I’m taking it as a win!

Back in 1977 Hagon's straitened out a buckled Honda Comstar wheel for me. Saved me a fortune, great company.

Glad it turned around and hope you get the scratch on the swing arm painted up.

@TheMissendenFlyer

Жыл бұрын

Willdo

I watch your channel from time to time but every video on this bike I have to watch. It’s just like watching a car accident in slow motion from a side street. This bike is cursed from day one. Thank god you have so many other good bikes. ❤

@TheMissendenFlyer

Жыл бұрын

I’m stunned by the amount of hatred I get regarding this bike - it’s just a fun project and I love it! Mostly I think jealousy is at play….

@canarychrome7012

Жыл бұрын

You seem quite angry. I never meant to belittle it. We all make mistakes and buy a bike that hasn’t been good. I really don’t know how you can keep defending it. Id say plenty of people like your gold wing and gs and Ducati. But jealous of a royal Enfield that cost you a fortune ? I like your channel ! This bike is just a disaster really. Doesn’t mean I don’t like your channel just cause I think one of your bikes isn’t great. You do seem quite angry lately. Chill out. It’s only a bike channel.

@TheMissendenFlyer

Жыл бұрын

Yes I'm very much known for my anger :0) All the best.....

Hi Andy. Super important: make sure on the left hand side you have a thick washer ir, put the handle back. Dont need to remove shock, just undo the bolt, put in a washer or two to compensate for missing handle.

Andy next time you pass a camping/ caravan shop go in and buy yourself a rubber mallet (the type used to knock in tent pegs) you'll be amazed what can be achieved with said implement with zero damage! You should have put a thin strip of wood between screwdriver and swing arm! Ps really sorry to see how you were messed about and conned with your customisation of this bike, thankfully the Chris fella came to the rescue! Loving the channel as always!

Nice one TMF , always good to give it a go yourself 👍 and bike seems be handling well enough for our shocking roads. Get some touch up on the swingarm or cover with a sticker .👍😁

@TheMissendenFlyer

Жыл бұрын

Yes - already touched it up - all good.....

I remember Alf Hagon from years ago. Think he was a grass-tracker or something. Anyway, their products have always been superb imo! 👍

I fitted a similar pair of Hagon shocks to my Continental GT last summer and find them ideally suited to the bike. More sophisticated and considerably more expensive alternatives require lots of trial and error adjustments to get them right but Hagons are simple and work well straight out of the box. I was told to start with the softest preload setting, put a few miles on the bike then adjust them up to the medium setting which I did and the handling is now far better than when the bike was new. Mind you I have also fitted a YSS fork kit and a pair of Avon Roadrider tyres both of which I can wholeheartedly recommend.

@TheMissendenFlyer

Жыл бұрын

Yes I did look at the YSS but I think these are fit for purpose - I'm very happy with them. Thnaks for watching!

At the start I thought! I would go hagon shocks? Good choice! Nothing has been easy with that bike well done 😂

Helped a friend of mine change his Thruxton shocks. On reassembly he snapped the top mounting bolt. Fortunately I'm really good with a bolt extractor. (lots of practice) and had a spare replacement bolt (lots of pack-ratting). Post-mortem revealed that the bolt had been over-tightened by the shop that previously changed the shock.

As already noted, we look forward to the new cartridge kits installed in the front forks. You now know you've done half a suspension upgrade with new rear shocks 😁

Red rubber grease is always handy to have to help move things into place to line them up - its all about learning as you go. :-)

Very impressed with your humility mate. There are others on YT who would never admit their fallibility; doing so would severely bruise their massive egos. And yep Nigel seems like a proper decent guy.

@TheMissendenFlyer

Жыл бұрын

He’s baled me out on numerous occasions!

@kwak1k

Жыл бұрын

Del boy?

@speedtriplerider7853

Жыл бұрын

@@kwak1k no mate but i'm sure you won't need many guesses to nail it - the one i'm thinking of really meets all the criteria stated above

Another fine video to watch over breakfast - I must blag a ride on an RE sometime soon. I was down your way-ish a week or so ago, checking to see if one of our favourite walks from Wendover still exists, or has been destroyed by a certain railway line (it’s still hanging on). The roads there are getting diabolical. They’re not great around north Bucks, but the run over from Ivinghoe was horrible - really not pleasant trying to avoid the big craters.

@TheMissendenFlyer

Жыл бұрын

Welcome to my world….

Good to see the story had a happy ending. A great value performance upgrade.

Hi Andy fitted hagons on my bullet classic 500 . Just like you said transformed boke cheers for all the vids really fab .

@TheMissendenFlyer

Жыл бұрын

Thanks Ray - appreciate that!

We have all learnt by trial and error and error but usually in private. Great to see you sharing your attempt and showing that these jobs are not beyond DIY mechanics. Although each new job is a challenge, the next time you change shocks will be fine by yourself….

@TheMissendenFlyer

Жыл бұрын

There won’t be a next time if I can find Nigel!!

A little bit of washing up liquid on the top rubbers will help, if it's really cold warm them up a touch. Hagon are an excellent company always very helpful.

@TheMissendenFlyer

Жыл бұрын

Yes I found them so for sure…

The beauty of video editing - if it was me there would have been a LOT more swearing!! Great job Andy - and love the honest way you show us everything (except the swearing 😂)

@TheMissendenFlyer

Жыл бұрын

I like to be a “warts and all” channel and not hide any issues I have around my motorcycling - it would be easy enough to do in the edit as you say! Of course we all swear from time to time but in general I don’t see the need for it on my channel, those that do I find come across as somewhat ignorant and tend to make me want to switch off…. Thanks for the kind words Steve and for watching!

Well done mr Flyer! Use the jack to tune the boltholes in synch. Nigel should know. I guess he knows now! 😄

Hi Andy, pleased for you that after the trials & tribulations of fitment they are better shocks than the originals. The unintended pun made me smile with reference to the roads being shocking by the way. Thank you.