DIY Epoxy Table Build - Step By Step Guide (uncut)
Тәжірибелік нұсқаулар және стиль
Online Epoxy Table Master Class... CLICK HERE...
www.diywithgreg.com/product-p...
How you can find DIY With Greg:
Instagram - / diywithgreg
Facebook - / diywithgreg
DISCLAIMER:
All my videos are for entertainment purposes only. Woodworking and Metal Working are very dangerous activities and should only be performed by trained professionals.
#woodworking #resin #epoxytable
Пікірлер: 124
Congratulations 💐 My brother waoooooooooooooooooo beautiful work ❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
¡¡¡¡EXCELENTE !!!! CÓRDOBA ARGENTINA.
Man, this table is killer sick beautiful!! LOVE IT!!!!
Stunning. Love the partially translucent blue epoxy.
I love the way u build my dreams.. hopefully I could make it too.. very nice..😊
You are well done ! this is a cool job! Thanks for the hard work!!!
Stunning table.. Thanks Greg
Супер!!!! Большой стол, и много работы! Респект!
It is beautiful work, with an excellent finish. I watched the entire video and learned a lot👌👍👏👏👏
Dude you should market that planing sled as a kit. I'd buy it. That's definitely the best one I've seen yet. I really like the frame of it. It looks cool to. Great video!!👍👍
@WoodlandRevivals
Жыл бұрын
This actually isn't a bad idea at all bro. Brand them and slang them to other builders 🙌
Хочу дать совет, приварите по краям стола уголки по 1,5м и проведите трос, и перекинуть провод через трос и вам не нодобудет его держать руками.
Probably my favourite of your table tops.
really great performance thank you so much ...peace and love
Masterpiece!!!
best 1 yet!!! omg this is the 1
That's brilliant
Sjoe ...dis kwaai.... you are the man... one day I will build my own tables.
This is amazing!!
Table so beautiful❤❤
That is a very mesmerising video. Wow.
Nice work. The finishing is superb. Many thanks for sharing this video.
@diywithgreg
10 ай бұрын
Thank you! Cheers!
It's outstanding really
Beautiful work
Killer Job!
Well done buddy!
Exelente desde Aguazul casanare Colombia un abrazo fuerte 🎇
Hi after polishing the epoxy,if I put odies oil on the epoxy, will it make it shinier and scratch resistant?
You are simply intelligent and a creative mind. From the making of the needed tools to do your project. To the finish of the actual epoxy table. Amazing job man.
Bellissimo questa è arte
When you are done with the top of the table, what do you do with the bottom of the table?
Awesome work, how much epoxy did you end up using/needing? I am doing abiut same size and am unsure how much i need
nice, cool job 😘
Muchas gracias 😂
Nos minutos 13:44 você passou uma Cêra pra que a cêra?
Could we use teak wood? What is the best ratio for epoxy and hardener? You are such an awesome artist😍.... God bless you with more ideas. Cheers
Next time I would explain each step verbally as you are building so newbies could follow a little better. Nice work
What is the *cream* used for polishing? Is it a * polish* ? i am interesting !!
Do you ever have any issues sanding that high with Rubio? Don't they claim to stop sanding at 180 or 220?
جميل جداً
You really put a ton of time and effort into the design and build of this truly gorgeous finished piece, not to mention the production and editing of the video. Speaking of- Thank you for condensing each step into a manageable 30 minute video for numpties like myself! I know a table like this takes literally months of hard work (daily) to get to the finish line. Thanks. Btw that’s an ingenious little router slab device you’ve constructed- when you consider that Woodpeckers sells their Router Sleds for over a $1000 and yours is just as effective for a fraction of the cost: that’s a very clever design indeed! I’ve seen other videos on making DIY Router sleds- yours is brilliant! Simple yet clever! ……..I do have one quick question. I am currently in the process of building my own Rputer sled. I have not seen a Router Slab Bit for your sled as the heavy duty/big/wide yellow one that you have in your Router. Where did you buy this bit? It looks like a 1/2” shank, or is it a 1/4”? Thanks in advance for your help and attention to this question. I also look forward to more of your epoxy table/woodworking videos in the future. Cheers! Scott.
@palashkumarchowdhury2998
11 ай бұрын
ণণনণণণণণণণনণণণনণণণণষণণণণণনণণণণণনণণষণণণণণণণণণননণনণণণণণণনননণণণণনণণণনণণণণণণণণণণণণণণনণণণণণনণণষ্ট।
@diywithgreg
10 ай бұрын
Thanks so much for the kind words and support. Think the brand we buy is only from South Africa
Súper waooooii❤
Ой гуцалык муцацалык гуцацюнька гуцаца 👍👍👍 !!!!
Do you have any plans for the sled for sale?
Good luck
Hi friend good work
What about under that table? There might be some parts of the wood the epoxy didn´t get so it´s not straight?
I'm curious. I'm thinking of trying something like this both for a dining table and a desk. With the latter, would you keep it strictly a match with the wood used for the desk top as far as the drawer frame and drawer fronts are concerned, or try to get the epoxy and identical color in? I'm leaning to keeping it just wood so that the accent is on the desk top. Any thoughts?
@diywithgreg
10 ай бұрын
Your idea sounds about what we would have done. Sounds good
What is the release wax you use in the mould? I've seen many people using tape instead so wondered if wax gives a better result.
@garyburnett7378
9 ай бұрын
You have to be careful with melamine. If the epoxy heats up too much during curing, it can melt the vinyl part of the melamine and stick to your project. Tyvek or similar tape avoids this. It may require a little more sanding because of the lapping of the tape can leave a slightly uneven surface. But compared to prying the melted melamine off and then grinding and sanding the rest of it off, I will chose the Tyvek every time. Good luck.
Looks amazing 😊. But what kind of epoxy is it? Isnt it quite expensive, and what about fumes? Im tought up with epoxy being extremely poisonous, both inhaling it and by touch. But you Seem like you are handling a product thats harmless.
It got really Flat? Iam wondering becausethe rig is so wonky youcan see it clearly in 3:35.
What thickness is the table top mate ?
Had you put a smaller haphazardly cut piece in the big open space would ve saved the epoxy cost
@diywithgreg
10 ай бұрын
Great idea, definitely
Greg you need better breathing protection and a better track saw! love the videos though
@diywithgreg
Жыл бұрын
Roy, thanks. This is an older video, you should check out our new videos. Much better 👌🏻
In a work area with the open doors, how do you keep things from getting in the resin while it is curing?
@diywithgreg
Жыл бұрын
We have a dust free room
@user-ye4vp9eq5y
2 ай бұрын
❤❤❤ جميله جدا
❤❤❤❤❤❤❤❤❤
This great work is hard to learn? Can you create a nice table for me ?
@diywithgreg
10 ай бұрын
Yes I can
how many liter you use epoxy for this ?
😊❤
Have you thought about doing a whole wall?
What's the song that starts at 9 min? Love it!!!
@WoodlandRevivals
Жыл бұрын
Locked Up by Autumn
Paste wax like car wax?
May I ask what you polish the table with?
@diywithgreg
Жыл бұрын
We using the Festool system now
Good day Greg. I'd like to know where about are you guys situated? How do we get it touch with you?
@diywithgreg
10 ай бұрын
South Africa
Sir size , thikness plz tell me
how much does a table like this cost? good job 💥
@diywithgreg
Жыл бұрын
Depending on size
pag magpapa gawa po ng ganyan magkano po aabutin? thank you
Which ruter bite use in video?
@diywithgreg
10 ай бұрын
45 digress chamfer bit
The gantry on your sled flexes and the wheels lift up. There's no way that's 100% flat or level.
What you use to make mould
@diywithgreg
10 ай бұрын
White melamine
How many gallons did you used for this project
@elyseruben4143
Жыл бұрын
If I had to guess I would say 40 to 50 liters at least I have done many epoxy tables and there was alot of open space on this table...maybe more??
DIY if you have a $30000 shop and $10000 in tools!
@Beebop-ow9ge
3 ай бұрын
So you’re saying there’s a chance
@Jacapojacapo
3 ай бұрын
😂😂😂you two really got me!
Kolko je trajao citav proces
magkano po ang ganyan?
A front door would be cool.
@storyteller3243
Жыл бұрын
Omg I'd love that
Question: why is it you didn’t feel like you needed to put braces under the table like other KZreadrs do? I agree aesthetically it would look bad on this table because the beautiful transparent epoxy would show them. But apparently (I don’t really know) the wood warps over time. Which seems logical.
@diywithgreg
10 ай бұрын
Our steel legs has a supportive structure underneath
@aaronfreeman8436
10 ай бұрын
@@diywithgreg thank you 🙏
Can I, or Hollywood have a room,walls and floor like that please. For a nightclub room in the lounge.🤔
explain how you used length X width X height on an irregular shape OMG
@StringBanger
Жыл бұрын
It's an average..
Do you live in the United States?
@diywithgreg
10 ай бұрын
South Africa
😂😅
step by step, but no narration? board is warped, severely. maybe talk through that so the new ppl to WW can fix their issues when they come across them.
@diywithgreg
10 ай бұрын
Have many other videos going into our builds
@jqlmanufacturing9129
10 ай бұрын
@@diywithgreg love it
7000 dollars in isa
sans protection c est du n importe quoi
Why did you have to ruin it with carving your brand on it ? At least put it on a hidden place.
@diywithgreg
11 ай бұрын
Does artist sign their work at the back of their art?
@ooxOBHOxoo
11 ай бұрын
@@diywithgreg mate, although it's a nice table, it's still a table. "Art" ? Back to reality plz.
@diywithgreg
11 ай бұрын
So you only see art as someone that paints something on a canvas?
@ooxOBHOxoo
11 ай бұрын
@@diywithgreg What I see is someone who ain't worthy of my time, so keep branding you work if it makes you feel better about yourself. Mr great artist.
@diywithgreg
11 ай бұрын
Okay no wait a sec. You compliment me on how beautiful the table is, and complain on our branding methods thats not according to your taste. Then all of a sudden im not worthy of your time anymore, sounds like we need to have this conversation once you have grown up.. so let me know once you have.. #(please do continue to comment like a non grown up, because it helps with the KZread algorithm) ✌🏻
Lol do it yourself it says...
How you can put ...DIY to this is laughable ...
@22:19 > To do that without a mask is just plain stupid...
Don't you mean 100% flat and not level? There's a big difference
You're fired.. I'm lookin at that slab wiggle and wobble while you "attempt"to flatten it..
@diywithgreg
10 ай бұрын
Wiggle wiggle wiggle..