DIY Epoxy Resin Craft | Customized Letter Keychain with Names printed on Inkjet Transparency film
Тәжірибелік нұсқаулар және стиль
Hello, Everyone!! Here's another video of Epoxy Resin craft project. Simple, fun and easy to do resin craft idea for beginners.
I am making customized or personalized letter keychains with names for the first time. I used transparency film for Inkjet printers for printing names and cut them manually to place in the resin. They turned out nice and pretty.
Please follow necessary SAFETY MEASURES while working with resin. Work in WELL-VENTILATED or OPEN areas.
Do Like, Share & Subscribe!!
------------------------------
Materials:
Materials:
Spring drill: s.click.aliexpress.com/e/_De5...
Colorant: s.click.aliexpress.com/e/_Dee...
Silver/Gold foil: s.click.aliexpress.com/e/_DdC...
Alphabet mold: s.click.aliexpress.com/e/_Ddq...
Keychain: s.click.aliexpress.com/e/_DDQ...
Screw Eye Pin: s.click.aliexpress.com/e/_DBw...
Inkjet Transparency film: s.click.aliexpress.com/e/_DE6...
------------------------------
#resincrafts #diy #resinjewelry
Пікірлер: 50
Amazing video Simply instructions 👍
@CharmsDIY
Жыл бұрын
Thank you ☺️
Nice video instructions are very clear. Now only I started my resin projects Thank you so much for ur videos I'm from India
@CharmsDIY
Жыл бұрын
You're welcome. Good luck with your resin projects 👍
Loved the key chains and instructions are clear. I have not started the resin work but am seeing many videos. Will definitely try this one . I'm from India
@CharmsDIY
Жыл бұрын
Thank you very much ☺️. Good luck to you with your future resin projects👍
Nice keychain n colour. ☺️ Hyee from malaysia
@CharmsDIY
Жыл бұрын
Hello!! Thank you for the compliment 😊
❤❤
@CharmsDIY
4 ай бұрын
❤😊
Your keychain are great, couldn’t see the instructions (The writing) even with my glasses.
@CharmsDIY
Жыл бұрын
thank you for the comment. About the writing do you mean names or the caption?
🤩🤩🤩🤩👏🏻👏🏻👏🏻👏🏻
@CharmsDIY
Жыл бұрын
😊😊❤❤
Luv ur Letter keychains, to get the names can that be done just with a computer or did you use a Circuit or Circuit Joy?
@CharmsDIY
2 жыл бұрын
Thank you 😊. I just printed names on transparent film with inkjet printer and hand cut them. I didn't use circuit.
I really loved your works❤️❤️ I have a doubt After adding white and glitter, is it necessary that something should be added on top of it?????
@CharmsDIY
4 ай бұрын
Thank you!! 😊 It is not necessary to add another layer but adding a final layer for doming the pieces gives better finishing.
Can we use mica powder in place of colour
@CharmsDIY
Жыл бұрын
Yes, you can.
Mba Itu saat proses finishing resin bening yg di pake tetap di campur katalis nya atau resin aja,
@CharmsDIY
7 ай бұрын
Halo!! Ini adalah campuran resin epoksi (resin dan pengeras dengan perbandingan 2:1)
How did u do the name so small
@CharmsDIY
Жыл бұрын
I printed the names on inkjet transparency film through inkjet printer. Font Brush Script MT and size 16 and hand cut them.
I have been making keychains and earrings from molds with premade holes. I’ve been running into the issue of not being able to thread the jump ring into the premade hole. The hole is not blocked with resin but for some reason it is nearly impossible. Am I making my pieces too thick or am I possibly messing up the jump ring when opening? Any tips or tricks? Have you ran into this problem as a beginner?
@CharmsDIY
3 ай бұрын
The keychains are probably too thick for the jump rings. Most of my molds do not have premade holes, so I simply drill a hole to add a screw eye pin. I do have one couple heart mold with premade holes and they are too thick that they requires bigger jump rings. Also the premade holes are straight and the jump rings are usually round, so they are difficult to insert through the hole. I suggest using triangle jump rings in this case or simply alter the jump ring shape into a triangle. Good luck!!
@lizzz1023
3 ай бұрын
@@CharmsDIY thank you!!! I will try out the triangle jump rings.
What size does the name have to be
@CharmsDIY
Жыл бұрын
I used Brush Script MT Font, Size 16 pt here. They are a bit smaller. You can increase the size little bit upto 20 pt in the same Font.
How small did u print the font
@CharmsDIY
Ай бұрын
I printed the names on transparency film through inkjet printer.
Vinyl sticker or any other sticker???
@CharmsDIY
Жыл бұрын
Hi, I printed the names on transparency film through an inkjet printer, cut the name and put it in the resin. It is not vinyl sticker. It is just like a plastic that can be printed on.
Can u show me were to gt the name the names printed at
@CharmsDIY
10 ай бұрын
I bought the transparency film and printed it at home through Ink Jet printer. As long as you have the transparency film, you can print it at home or any store that has printing service. Just make sure that the transparency film that you are using is compatible with the type of printer you are using.
how to connect to uh?
@CharmsDIY
Жыл бұрын
Sorry, I couldn't get you.
Sticker size
@CharmsDIY
10 ай бұрын
I used Brush Script MT Font, Size 16 pt. here. They are a bit smaller. The size can be increased little bit up to 20 pt. in the same Font.
Where to buy po the materials
@CharmsDIY
Жыл бұрын
I buy most of the materials from aliexpress. Links are in the description below.
X favore mi puoi dire quantità A e B
@CharmsDIY
Жыл бұрын
Ciao! Il rapporto differisce con le diverse marche. Quello che uso è 2 parti di resina e 1 parte di hardener. Qui, probabilmente ho usato 14 g di resina e 7 g di hardener.
I have an issue with the transparent label letter. When I place the clear resin, after drying the black ink disappears to gray. Can you give me a tip so that this doesn't happen??
@CharmsDIY
Ай бұрын
I am not quite sure. From your comment, it seems that the dark color has dispersed in the resin turning it into gray. Maybe the label letter is not waterproof or the ink is the problem. In this case, you have to seal the sticker before adding into the resin.
How much the one key chain costing???
@CharmsDIY
5 ай бұрын
It depends but I usually charge about 2-3 dollars.
@TechSupportz
3 ай бұрын
www.majas.in
Price???
@CharmsDIY
Жыл бұрын
I usually charge about 2-3 dollars.