[DIY] ドラムサンダー製作 Drill Powered Drum sander ZC0010
Тәжірибелік нұсқаулар және стиль
手持ちのBoschの電動ドリルとドリルスタンド(amazonで買えるお手軽価格のもので、横に90度回転します)を利用して、まだ作っていなかったドラムサンダーを作製することにしました。
ドリルスタンドの補助台(自作)に合体する形です。ドリルスタンド補助台の寸法は動画の最後に簡単に載せておきました。
補助台が無くてもドラムサンダーとして動きますが、ドリルスタンドをちゃんと固定して下さいね。ドラムサンダーの足パッドの位置も変えた方が安定するでしょう。
とにかくスタンドを利用するとドリルを乗せる台を作る手間を省けるのが利点です！
次回はこのスタンドでディスクサンダー作る予定です！
動画アップの後フレキシブルカップリングを頑丈なものに交換しました。
jp.misumi-ec.com/vona2/detail...
--------------------------------------------------------------------------------------------------------------------------------------------
I decided to use my Bosch electric drill and drill stand (a handy one you can buy at amazon, which rotates 90 degrees sideways) to make a drum sander that I hadn't made yet.
It is a form that is combined with the auxiliary stand (self-made) of the drill stand. The dimensions of the drill stand auxiliary stand are briefly posted at the end of the video.
It works as a drum sander without an auxiliary stand, but please fix the drill stand properly. You should also change the position of the foot pad of the drum sander.
You may extend the base base to the main body and fix it to the stand main body base.
Anyway, using a stand has the advantage of saving you the trouble of creating a table on which to put the drill!
Next time, I plan to make a disc sander with this stand!
--------------------------------------------------------------------------------------------------------------------
ZEN CRAFTS KZread Channel
/ zencrafts
Instagram
/ zen_crafts_
[DIY] 角度フリー 丸ノコ ガイド(デジタル分度器をフェンスに！)
• [DIY] 角度フリー スライド丸ノコ ガイ...
【DIY】サイクロン集塵システムを改良してみた
/ l9c5yunudwu
[DIY] 超簡易スピンドルサンダー制作 Super simple Spindle Sander
/ c56_vdjjfiu
[DIY] ジグソーテーブルとワークベンチを合体! Unite the Jigsaw table and Workbench
/ yh7xt2zzdwc
-------------------------------------------------------------------------------------------------------------------
サンドベーパーの必要な長さ計算(直径60mm 長さ360mmのドラムで斜めに巻いて行く場合)
ドラムの円周は3.14x直径3.14x60=188.4mm(これが斜辺の長さになります)
ドラム円柱の側面積は
側面積=2×3.14×半径×長さ
側面積=2x3.14x30x360=67824
側面積は67824平方mm
必要なサンドペーパーの長さ(長方形時)
サンドペーパーの幅＝100mm
長さ=67824÷100=678.24mm
直角三角形の底辺の長さを求める
直角三角形の斜辺の角度は
θ=sin-1(h/斜辺)
θ=sin-1(100/188.4)
θ=32.0585度
三角形の底辺の長さは
底辺=斜辺 cos θ
底辺=188.4 cos 32.0585
底辺=159.670mm
最終的にサンドペーパーの必要な長さは
678.24+159.670=837.91mm
なので今回の場合は、幅100mmペーパーを838mmでカットし横に広げます。左下の始点から右に160mmより左上の角に向かってに墨入れ。右側も斜辺が平行になるようにして平行四辺形を作れば良いわけです。
文章が下手で分からないですね(汗
実際のドラムディスクの直径は微妙なのでペーパーを実際に巻き付けて長さを出した方がベターでしょう。
Calculation of required length of sand vapor (when winding diagonally with a drum with a diameter of 60 mm and a length of 360 mm)
The circumference of the drum
3.14x diameter
3.14x60 = 188.4mm (this is the length of the hypotenuse)
The side area of the drum cylinder is
Side area = 2 x 3.14 x radius x length
Side area = 2x3.14x30x360 = 67824
Side area is 67824 mm2
Required sandpaper length (when rectangular)
Sandpaper width = 100mm
Length = 67824 ÷ 100 = 678.24mm
Find the length of the Bottom of a right triangle
The angle of the hypotenuse of a right triangle is
θ = sin-1 (h / hypotenuse)
θ = sin-1 (100 / 188.4)
θ = 32.0585 degrees
The length of the Bottom of the triangle is
Bottom = hypotenuse cos θ
Bottom = 188.4 cos 32.0585
Bottom = 159.670mm
Finally the required length of sandpaper
678.24 + 159.670= 837.91mm
So in this case, cut 100mm wide paper at 838mm and spread it horizontally. Ink from the starting point on the lower left to the right from 160 mm toward the upper left corner. You can make a parallelogram so that the hypotenuse is parallel on the right side as well.
I'm not good at writing.sorry.....
However, since the diameter of the disc of the actual cylinder is delicate, it would be better to actually wrap the paper to get the length.
-------------------------------------------------------------------------------------------------------------------
使用アイテム類
フレキシブルカップリング ジョーマックス 標準タイプ L050-U-10H7X10H7 L／SS
jp.misumi-ec.com/vona2/detail...
Bosch Professional(ボッシュ) 電気ドリル GBM10RE/N
amzn.to/3yIhGI8
Drealin 電動ドリルスタンド 0-90度(GREEN)
amzn.to/3nHynx1
SK-11集塵機接続アダプター
amzn.to/3bOYyPE
軽量形ベアリングユニット 止めねじタイプピロー形ユニット 軸径 10Φmm、KP000
www.monotaro.com/p/7021/1855/...
スターエム 竹用ドリル
amzn.to/3nIvzzI
山真製鋸(YAMASHIN) SM-20A スピードマスター
amzn.to/3uupDOF
ヤザワコーポレーション どっちもクリップ 強力タイプ CLW-3
amzn.to/3ahdxBB
鍋屋バイテック(MiSUMiさんで買いました) MST／MSTS フレキシブルカップリング スリットタイプ (MST-20-10-10)
#DIY #ドラムサンダー #DrumSander #治具
Пікірлер: 63
I have watched 20+ videos about making a drum sander - this is by far the best! Thank you for providing the detail, especially about the different types of motor couplings. Also great that you showed it running with both narrow and wide boards!
@ZENCRAFTS
Жыл бұрын
I am surprised at the extreme compliments. But it makes me very happy. :) thank you very much !!!!!
Fantastic! I love your approach and creative problem-solving.
@ZENCRAFTS
2 жыл бұрын
Thank you! Your comments give me courage!
Very nice planning and production. Excellent design.
@ZENCRAFTS
2 жыл бұрын
Thank you so much.Your message will be encouraging!!
Awesome idea. Pretty good for boards.
@ZENCRAFTS
3 жыл бұрын
Really thank you for your message ! It will be an encouragement for my production.
Cool! Excellent work
@ZENCRAFTS
3 жыл бұрын
Thank you so match. I'm honored to say that !
Nice song video singing my friend.👍👍
@ZENCRAFTS
Жыл бұрын
Thank you so much my friend.👍
Excellent work
@ZENCRAFTS
3 жыл бұрын
Thank you for your comment. I am so happy !
Great video!
@ZENCRAFTS
2 жыл бұрын
Thank you for your compliment message !
Amazing! So innovative! x
@ZENCRAFTS
Жыл бұрын
thank you so much ! your comment is inspiring :)
nice work i love it
@ZENCRAFTS
2 жыл бұрын
Thank you for your message !
Well done and very useful TY
@ZENCRAFTS
2 жыл бұрын
Oh! Thank you so much :)
The sanding demo at the end of the video shows that the guide table has no detent and the sanding power wheel moves when sanding, which means that the sanded surfaces will not be the same. Locking the height adjustment doesn't take that much work. Otherwise, the idea is quite good, I also have something similar, only the whole structure is welded iron to make the machine strong and heavy.
@ZENCRAFTS
4 ай бұрын
I think it's exactly as you say. I would like to have a structure that prevents the board from returning to the front by using a motor enithing.
参考になります！
@ZENCRAFTS
2 жыл бұрын
ハルソラさんコメントありがとうございます！ ハルソラさんのチャンネル見させて頂きました。 テーブルソーや旋盤羨ましいです！ しかも素晴らしい技巧と頭の良さに感服しました。私なんぞの動画を参考にして頂けたなら嬉しい限りです^^ ありがとうございました
Молодец! Спасибо за подробное описание. Теперь знаю как всë сделать пошагово. Привет из России. С уважением, Андрей. 🤝
@ZENCRAFTS
3 ай бұрын
Спасибо из Японии!🤝
Parabéns pelo magnífico trabalho!
@ZENCRAFTS
7 ай бұрын
Obrigado pelas vossas palavras de encorajamento! Thank you! ありがとうございます！
That drill is praying for mercy.
Well engineered, but is really overkill for such a simple project, but he was able to showcase his Tools!
@ZENCRAFTS
2 жыл бұрын
Thank you for your comment! It may be an overkill! It ’s a tool that I use only occasionally.
NICE!!!!!!! 👍🏼👍🏼👍🏼
@ZENCRAFTS
9 ай бұрын
Thank you so much !😆
Brasil ..ótimo parabéns
@ZENCRAFTS
2 жыл бұрын
Obrigado pelo seu comentário!
Мастер с большой ьуквы 👍👍👍
@ZENCRAFTS
2 жыл бұрын
Спасибо за сообщение !
Good day. The idea is good, I'm just worried if the drill can withstand such a load. I have a few questions. How long is the cylinder? Axis diameter? What material is the flexible coupling between the drill and the shaft made of? Thank you in advance for your answers. The text is translated by Google. I'm sorry for mistakes.
@ZENCRAFTS
2 жыл бұрын
Thank you for your question. ・ Although the drill can withstand the load of the drum sander at the moment, it is recommended to use it in the category of DIY. -Stainless steel cylinder is 40 mm. ・ Maybe flexible coupling are aluminum alloy and polyurethane. I am also indebted to Google Translate.
Amazing
@ZENCRAFTS
Жыл бұрын
Thank you so much🥰
Fantastic
@ZENCRAFTS
Жыл бұрын
Thank you very much ! I feel happy about your comment !!
使用アイテム類 Bosch Professional(ボッシュ) 電気ドリル GBM10RE/N amzn.to/3yIhGI8 Drealin 電動ドリルスタンド 0-90度(GREEN) amzn.to/3nHynx1 SK-11集塵機接続アダプター amzn.to/3bOYyPE 軽量形ベアリングユニット 止めねじタイプピロー形ユニット 軸径 10Φmm、KP000 www.monotaro.com/p/7021/1855/?displayId=5 スターエム 竹用ドリル amzn.to/3nIvzzI 山真製鋸(YAMASHIN) SM-20A スピードマスター amzn.to/3uupDOF ヤザワコーポレーション どっちもクリップ 強力タイプ CLW-3 amzn.to/3ahdxBB 鍋屋バイテック(MiSUMiさんで買いました) MST／MSTS フレキシブルカップリング スリットタイプ (MST-20-10-10) ※当チャンネルは、Amazon.co.jp を宣伝しリンクすることによってサイトが紹介料を獲得できる手段を提供することを目的に設定されたアフィリエイトプログラムである、Amazonアソシエイト・プログラムの参加者です。 * This channel is a participant of the Amazon Associate Program, an affiliate program designed to provide a means for sites to earn referral fees by promoting and linking to Amazon.co.jp.
Wonderful project! I see a lot of DIY drum sanders here on KZread powered by a drill but they all not use a flexible coupling. Do you think it is over engineerd or do you think it's nessesary when you use 2 bearings.
@ZENCRAFTS
Жыл бұрын
Since the vibration becomes large due to the structure of the drum sander, I tried to adopt a flexible coupling. If there is no vibration, I think that flexible coupling is not always necessary. Thank you for your comment!
I have yet to find a corded drill with a cylindrical collar on the housing ... except for a 1/2 hammer drill.
@ZENCRAFTS
Жыл бұрын
Thank you for your comment. Bosch Professional GBM10RE/N is cheap and good.
@Bonjour-World
Жыл бұрын
@@ZENCRAFTS Thank you. I should have checked before I made my comment. My apologies. A few years ago I acquired several 'Zyliss Vices'. They include a mount for a drill with a 38 or 42 mm collar. The few drills I found with a collar in the US had a 45 mm collar. I became frustrated and quit looking. Having checked today I see that they are very common ... however the ones I found all have 45-46 mm collars ... drat.
👏👏👏👏👏👏👏👏👏👏👏👍👍👍👍👍👍👏👏👏
any link to those wheels ? as this si the only part that i am missing and can not find
@ZENCRAFTS
Жыл бұрын
Thank you for your comment. After uploading this video, I replaced the flexible coupling with something a little more robust. jp.misumi-ec.com/vona2/detail/221000131426/?HissuCode=L050-U-10H7X10H7 This one. However, it may only be available from Japan. A search for "Flexible Jaw Coupler 10mmx10mm" may find replacements. Also kzread.info/dash/bejne/q5Oo3LyfYsuWoLg.html The above flexible coupling is used at about 30 seconds in this video. Thank you.😄
@bogas78
Жыл бұрын
But I was asking about wheels those small white that you used to slide bottom part
@ZENCRAFTS
Жыл бұрын
Oh! sorry!😱 That is called "戸車(TOGURUMA)" in Japan and is attached to the bottom of the sliding door. Maybe it's not available outside of Japan. amzn.to/42EjrD9 I think you can use the URL above, but I don't know if you can buy it from outside Japan!😅 thank you.
@bogas78
Жыл бұрын
@@ZENCRAFTS thx I will look for it locally . What hole diameter did you drill for wheel in those parts ?
@ZENCRAFTS
Жыл бұрын
Wouldn't the part around 9:43 in the video be helpful?
賢い
@ZENCRAFTS
3 жыл бұрын
コメントありがとうございます。 全然賢くなんか無いです。 でも実生活で褒められる事など皆無なので嬉しい限りです！
dont you mind can i need blueprint pls.. i need english language thank you
@ZENCRAFTS
Жыл бұрын
This was made while thinking about it on site, so there is no overall blueprint. Sorry for the comment.
0:10