Good Job. Thanks for sharing.

I made my first lathe back in 1974. I had two horizontal drill stands clamped to a cement stair panel, One held an old black and Decker drill and the other held an old chuck, which was my dead center. I used a brass fitting which I shaped to be the live center bit. I used a lump of timber too act as my chisel support and the chisels were all made form old metal files. I would turn nose cones from balsa wood for my model rockets. Later my father got hold of an old Knitting machine base and I used that for the base of the lathe and mounted the horizontal drill stands on to the frame and one on the carriage which was my dead center. Fun times.

Muy buena idea, te felicito !!! Y muy buen video, sin música, sin palabras y fluido. A la acción !

I liked it. It's the real deal.

私のＤＩＹ範囲なら十分事足りる。道具は使いようでいろいろ応用できるんだという事も大変参考になりました。行動派の貴殿にエール！！

This is one of my favorites, but i see room for improvements. This is the first that I will try. Some of the vids are more complicated and expensive than just going out and buying the tool.

.An effective practical low cost idea. Thanks for sharing.Your work jumped out dangerously because you did not drill a countersink hole with a centre drill so that the tailstock centre can go in further to lock your wood. Remember to oil the tailstock centre where it contacts the wood. It does help. Periodically readjust your tailstock as the vibrations can loosen the the contact at the tailstock. Your tool resr should be adjustable to be as close to the wood as practical to reduce vibrations

Buen trabajo amigo,he aprendido mucho con Ud. Gracias desde Cordoba(España). Saludos

DIYには丁度良さそう！やってみよ！

....Thank You for posting this....

Definitely trying this

move your tool rest so that it just clears the job a lot less chance of it flying out and gives more control

comecei a assistir seus vídeos hoje, impressionante como você tem idéias ótimas, hoje vai ser o dia todo só para assistir seus vídeos kkkkkkkk 10000000000 likes

exelente video abrazo desde ARGENTINA

You is off the Best my friend.

Sy suka dgn cara2 simpel kaya gini buat pelajaran baru good good deh

It makes me so glad I was taught at boarding school in 1966 age 11 how to use woodwork machines and metalwork too. I gather kids today don't get practical lessons like that these days.

Super practico, facil de elaborar, lo estare fabricando para mejorar mi taller de bricolaje, gracias por subir el video.

指輪の研磨に使っていた機械、手作りだったんですか。すごい！

Muito bom o torno caseira