DIY custom PVC freestanding pool towel rack that holds 8 towels and spins- SUPER EASY BUILD!!

I was looking for a towel rack that could hold lots of towels but be free standing as well so we could put it anywhere. After some brainstorming, I ended up with this! Make sure if you build this that you use a dowel as your core as it will keep it from sagging when loaded up. As long as you keep your towel bars balanced, this thing is a workhorse and will hold it all and the lifejackets at the ends! My neighbor bought some clips for his to keep the towels from blowing off, and those definitely work great. This video is a couple years old and they are holding up better than anticipated. The most expensive part is the umbrella weight but this whole thing can be done for less than $50. I made two in this video for our wonderful neighbors with pools as it was the least I could do! Make one for yourself!!
Here are the basic measurements that I used:
Main pole 36"
Arms (8) 23 3/4"
The little stubby pieces that connect all the T fittings are about 1 1/2"
Make sure to put a wooden dowel inside the pvc to give it strength! You want a tight fit.
Thanks for watching!

Пікірлер: 7

  • @mddurisko2928
    @mddurisko292811 ай бұрын

    Thanks for the share. Was super easy to make and what a huge space saver. I did the larger towel rack last year that looks like large steps. Sucked at trying to find an area to store. Your build takes up little to no space when I turn them all in the same direction and store in the shed. Thanks again!! You rock!!

  • @erikaborden1446
    @erikaborden14462 жыл бұрын

    Love your design - I’d like to make this and it would be super helpful if you could provide cut lengths. Thank you!

  • @frankiev4293

    @frankiev4293

    2 жыл бұрын

    Looks like 2 feet for the arms

  • @bobbycrockerii7545

    @bobbycrockerii7545

    2 жыл бұрын

    My apologies for the delay! Here are the basic measurements and I'll update the comments with this info too! Main pole 36" Arms 23 3/4" The little stubby pieces that connect all the T fittings are about 1 1/2" Make sure to put a wooden dowel inside the pvc to give it strength! Hope this helps!

  • @sunbtanman7354

    @sunbtanman7354

    Жыл бұрын

    Hey this is a great towel rack I've been looking for something like this fantastic idea. We like to go camping and we always have a lot of towels draped all over the place. This will work out great. Could you just tell me what Parts did you permanently glue and not glue so will still rotate. Thank you I appreciate you sharing this project.

  • @bonnieroalizo8118

    @bonnieroalizo8118

    10 ай бұрын

    @@sunbtanman7354

  • @tiffanygaither588

    @tiffanygaither588

    3 ай бұрын

    Thank you for sharing. I will modify this for displaying fabric in my craft room

Келесі