5:54 iPhone fleshlight: can’t see anything 100W DIY fleshlight: can’t see anything

wow... this is a real DIY project! Nothing fake! Thanks!

@mainchannel7755

5 жыл бұрын

That why i sub him 😘

@abdulhadi.k584

3 жыл бұрын

Good

Love it your a true DIY guy and can't wait for the video for powerbank

I love the work you do ,love your channel. You are one of the best diy creators on KZread

Dang this is extremely well done! I really appreciate the color coordinated schematic it really helps to understand what everything does! I've been really interested in all of the videos you've put up so far! I've been planing on making my own stuff butt its really cool to see how and what someone else made. Anywho keep it up!

I subscribed just because of this flashlight. Amazing job, looked like you paid close attention to every little detail!

Superb, best diy flashlight project on youtube!

That's awesome and great Really you make a super bright led light. I like your project.

Great print 3d. Nice video

Great job, looks awesome!

Awesome, inspired by your work! Subbed to you for this video and the power bank one as well :)

Me: hmm, I remember I've wanted to make something like this... This time nothing is going to stop me. Instructions: 3D print this. Me: fcuk here we go again...

@ozymandias7271

5 жыл бұрын

save you money and buy from china dude,.. fuck cheap (Alibaba)

@halavich9672

4 жыл бұрын

Fucking printer costs 200 bucks? Stop weeping!

@uiopuiop3472

4 жыл бұрын

cheapo fucking printer, buy it from china (Aliexpress)

@marco4570

3 жыл бұрын

Here to add another fucking fuck into this comment section

so much hard work man . love it

Nice Job. I really like the build.

Excellent build!

Super Awesome DIY thanks for this.

Great work! Keep making videos please!

I LOVE THIS CHANNEL PLEASE KEEP THE PROJECTS COMING!!!!!!!!!!

superb as always

wow, amazing project dude

You deserve more subs

@CoolBoy76628

2 жыл бұрын

Actually he deserves 2M every youtuber does deserve thi

Hi, this was an amazing project and I really liked it. But one main issue is that the 3S lipo battery used does not have an over discharge protection thus causing problems. Thus, it would be great if you fixed a BMS with balance charging for the flashlight battery and also provide charging facility.

outstanding! amazing job, thanks

You are a genius,nice job!!

Really Very Nice project

Thank you for the tip idea I might try this out

Holy shtit wowww!! Nice Flashlight!! Nice work!!

@taunteratwill1787

5 жыл бұрын

What's a shtit? A silent tit? :-)

Nice job

Great work nice video

Two things: One: how do I mount the voltage booster? (I ordered two, neither came with their own heatsink) Two: what are those four lights that go directly above the voltmeter?

I like your video and I love the new technology with LED where they could lower your electric bill and save money

Fantastic 😀

wow ... a super flashlight!

Good project, wanna do it now

Great job.....!!

Amazing!!!

Could you share where you got the large more focused lens from? Also, is it stacked on top of the existing lens? ie 2 lens stages?

Excelente montaje y buen diseño. Usandola a plena potencia debe acortarse rápido la vida util de muchos componentes de la linterna pero realmente es genial y una asombrosa la potencia de esa linterna, te felicito

Nice Torch

Awesome!

Amazing! :)

Im really interested in building one by my self. I have some experience with 100w led, and from looking at heatsink your using I have to ask you if it isn’t overheating. I’m using larger heatsink and I still find it quite hot.

WOw, I need this, tired of buying crap flashlights that break in few time.

Won't the 3D printed case (especially the led holding one) get melted because of high temperature of a heatsink ?

Very good nice video...

nice printed vice

how long does the battery last

love this

Does anyone know where to find a mini step down regulator that will take more than 28V input? The one he appears to use is only 28V maximum input.

Amazing

how do i power the converter? the battery i used overpowered the converter and broke it. also the lipo battery isnt sold anymore

can i use 250watts boost converter for the project? and how will i charge the batteries? thank you

You might be able to kill Dracula with that thing

Great video ! Have you tested the duration of operation with the given battery? if yes can you tell me?

Spicy pillow!

Can i use 5400 Lipo Battery? I don't see any 2650 batteries in Vietnam! (because I live in Vietnam).

Hi very nice project one question about which is the best way conect with the battery lipo o maybe make some block from liion pack.I not understand much about electricity.Thanks

Thank you, this is amazing! I am currently building it... The step-down for the fan will not step up, so it makes no sense to connect it right to the battery. Also connecting it to 32 volts booster output, it will rise to 100°C within seconds, so it will not survive it long. I decide to connect the fan directly to the battery.

@andreaseversberg

3 жыл бұрын

I think, I will connect the step-down for the fan between battery+ and booster+, so the voltage drops by the voltage of the battery (about 10 volts). Do you think that is a bad idea? Let me know!

i like that flashlight

effing genius!

What is the name of the application you used to draw the model before making it.

Hi, please make a video on how to make the power meter you use.

Is it possible to recharge the flashlight when it's assembled?

I want to build something like this but for a head lamp helmet mounted with battery pack that can go in a vest .i work on towers at night at a ski resort in storms to go fix or to remove excess snow i need long running time and i like how u have the ability to control the brightness

Can you tell me how many cells and how many volts this battery is? What battery needs at least a few volts and a few milliamperes of hours and a few cells. Thank you

How long can the light last at full power with that battery?

wy not using a fuse between the dc jack and the lipo for if ther is a short or does the lipo have the short protection circuit but nice video +sub

Olá. Lanterna fantástica!👍 Abraço 😷

Nice work! have you tried it during the daytime? i just wondering if it can eliminate the deep shadows made by sunlight.

@taunteratwill1787

5 жыл бұрын

Really?!

Where does the green and yellow wires come from?

Very nice project with full details .. Also u showed by using 50watt chip.. Woow.. I wish to make the same by using 20 watts led. What will b the voltage and amp to b set??

Videos are great, like them better when your explaining as your building instead of the awesome dance music. Thanks

how long it will last on high settings?

Very nice. Could you please specify a source for the optional extra lens?

@barkster

4 жыл бұрын

you ever find it?

but how long can u keep it turned on

How long do the batteries last?

Were can I get the 3d cover. I don't have a printer.

Nice

How many amperes does the lamp need?

nice work. you are subscribed. greetings from germany. thx.

I think there is an error in your wiring diagram: the step-down regulator for the fan is powered from the battery, not from the output of the boost converter... The step-down wouldn't surive the voltage from the boost converter

What is your 3D software tool?

Subscribed

Hi! Awesome tutorial. One question please. If you use a battery with 12.6V 30Ah, and you set the potentiometer to 3A on the current part, will it work? The input current limit of this board is 10A, and I dont understand if this 10A is only if I use it when at full with the potentiometer maxed out?

@bobikutya2

5 жыл бұрын

@@kralyn3d Thank you really really much and thank you for the video!

@volodumurkalunyak4651

5 жыл бұрын

You will have maximum power limited to around 80% at low state of charge and 90% at medium stare of charge and no limitation at full.

How many minutes can survive torch ??

I did not see what voltage was the battery?

On your next projekt you could send me the wireing diagram and i could design it in fritzing

what kind of volt meter is that?

What did you say at the end there? I can't see.

you should start selling this staff from your website or something, I don't see myself to build this up, but i will definitely buy it. any how you have a new subscriber

@LumenChaser

4 жыл бұрын

You can buy high quality flashlights that are 1/4 the size of this thing that are way brighter.

Mujhe 1km tak (approx) distance cover karne wala chahiye torch milega kya

thanks..now i have my own..buy from shop

What is the volt of battery?

Hello, you used 3s lipol? How long it lasts? Doesnt the step up driver overheat? Thanks for answers

@hehuha93

5 жыл бұрын

@@kralyn3d Thank you for the answer, although the 3s lipo has only 11,1V

Does it actually run at 100w tho? Because I'm having trouble to get them to get them to run at 60w

@kralyn3d

5 жыл бұрын

In my newest video , you can see it running at 100W during the battery pack testing

can i do this to upgrade my projector?

@pixelatedbeing2797

4 жыл бұрын

I wouldn't advise it, but it could be possible. I'm not a professional though so dont take my word for it. do some research!

I do not have the technical capacity to build this, so I only want to ask you if this flashlight is as bright as the lighting used in a tennis court.

Cool

respect

Очень круто!!!