Would you add Jet Dry to water? This was a great idea.

@pacificnorthwestprospector5039

9 ай бұрын

Always, only reason I didn’t do it in video was because of bubbles. Probably should of said something about it so I’m pinning your comment. 👊🏻👍🏻

I went to 60+ garage sales and dozens of thrift stores before I found the right kinda pan. Can't wait to build one for myself thanks so much!

@pacificnorthwestprospector5039

Жыл бұрын

inside pipe cutter or Dremel tool works good for cutting tube. Sorry I didn't show it in video. Best of luck. Gold Gold never leaves the pan and it truly reduces black sands quickly, I have been using it for years!

Im in the process of making a blue bowl. Bought sub pump at Harbor Freight. Had hose in shed..Got the cake pan from Value Village..Well on my way. Thx for this video..

That was put together very simple to understand. I'm going to try it out and get some GOLD!!

Thank you for this genius budget replication!

I just saw your video and one thing I saw a guy do with his actual blue bucket is he created a mat out of silicone in the bottom of the bucket about 1/4" thick and it made the gold stick to the bottom of the bucket even with the water moving fast. Edit: bowl not bucket.

I did the same thing. 1 mod i would recommend is to take a shot glass and work it down the center of the down spout slowly rolling it back and forth to create a flair at the top of the down spout like the blue bowl has. it helps to keep all the fines in without being sucked out at higher speeds of water flow

@Tom-yc8jv

2 жыл бұрын

A rubber band around the top is much easier and does the same thing.

@mikeD76

2 жыл бұрын

@@Tom-yc8jv I would imagine that would wear out over time from the abrasiveness of the media in the bowl. I know it's trivial it's just a rubber band but 2 minutes and a shot glass and you get a flare that's permanent

@usa91787

6 ай бұрын

How did you cut the cone off?

@mikeD76

6 ай бұрын

@@usa91787 I used a dremmel with a simple cutting disk.

I was going to do this but never thought of the water level and rubber band trick. Thanks so simple and obvious.

@pacificnorthwestprospector5039

8 жыл бұрын

good luck man let me know how it turns out!

I was thinking about doing the same thing.

Great video with lots of good information. Thanks!

@pacificnorthwestprospector5039

7 жыл бұрын

Alf Here thanks for the support more videos coming!

Great tutorial video man. I saw your video on some other channel, but saw your watermark at the end of that video, so I found your channel. I would love to see you make more content again. I hope all is well.

You a boss.. thanks for knowledge!

very smart I'll do a thank you. Rei from Brazil

that's awesome. I will definitely try it.

@pacificnorthwestprospector5039

7 жыл бұрын

hestonator11 lets us know how you fare or have any questions.

i ll use aquarium pump i dont know its enough or not but good to try.

Im with you on the D.I.Y. Bowl . I'm looking for gold ✨️ not trying to spend it ! ... like the video thanks for the information.

@c0smo263

4 ай бұрын

Its a very small investment if you're actually finding gold.

I would use a dremel to cut the cone. They have blades for that and if you have a few extra bucks, they have a larger tool that would make quick work of this. Just remember kiddies safety glasses!!!

Thank you! :-)

Wow! Nice! :)

I just bought all the gear to make this beauty, thanks for the info! I got an 1100 gph submersible pump though hope it isnt too much.

@pacificnorthwestprospector5039

8 жыл бұрын

you can put in a cheap shut off valve right after pump to control flow.

@mikeyragona

8 жыл бұрын

Got it, thanks for your reply,! I'll post mine when I'm finished with it,my 30 mesh classifier should be here today so I can actually use it.thanks again

Nice job! I guess it's time to go gold hunting.....

Thankyou !

@pacificnorthwestprospector5039

7 жыл бұрын

Kevin Mc Menamin no problem good luck gold hunting!

Good luck with your gold hunting!

@DaveR_36

8 жыл бұрын

+Pacific Northwest Prospectors How did you cut the cone?

I'm in the process of making one and I have a great bowl to do it with but what's the best way to position the hose for the best results? Thanks

Nice

I AM FROM INDONESIA, I LIKE YOUR IDEA...., VERY VERY GOOD... SO I'LL SUBSCRIBE FOR YOU... AND I WAIT THE NEXT VIDEO HOW TO MELT THE CONSENTRAT..

Verry good mate can I use a 9 ltr plastic wash basin I couldn't get 16 litre one

@pacificnorthwestprospector5039

9 ай бұрын

I don’t see any reason it wouldn’t work. May have to clean out more but gold is so heavy it’s hard to mess it up. As long as your leaving what’s in the pan alone between clean outs it should be ok. I can full blast this thing and the gold still won’t go over the cone.

What height did you cut the center cone at? I tried making one after seeing this video. I get the vortex but no material is going over the top. I made mine about 2.5” in height. Thinking it may be too high.

What did you use to cut the cone? How did you cut it and with what? Major omission in the instructions and tools needed.

@jasonhawks2225

2 жыл бұрын

I used a 4 1/2" grinder with a "type 27" . 045 cut off wheel. If you're careful (using just enough wheel to penetrate the cut) you can use the top of bowl as a guide and slide around it pretty easily. Then I used a rasp inside and a flat file outside to make it smooth. Sandpaper or a fingernail file will also suffice.

thats amazing. though not being able to drive makes it hard to go and get materials. To bad you don't sell these kits for like 40 bucks. so i could buy one.

@pacificnorthwestprospector5039

7 жыл бұрын

Kyle Messer sorry man, always short on time or I would! Hope you get a chance to try it!

How did you cut the inner cone? That would have been great to see in your video.

@pacificnorthwestprospector5039

7 жыл бұрын

John Galtman pretty far down in comments so I should say it again, pipe cutter and a file. Thanks for asking sorry I missed that step.

Anybody out there think the 158 gph pump from harbor freight would work for a diy blue bowl? Any advice is appreciated...as HF doesn’t carry the 380 pump anymore but a 158 gph for 9.99 and a 264 gph pump for 21.99 as of 2-29-20...HAPPY LEAP YEAR!

centrifugal concentrators with Flexy Cone will recover 1 micron fine gold

pipe cutter for the cone

How effective is this?

It's not the cost of the Blue bowl that hits hard. It is the cost of all the classifiers needed.

@plumtiger1

5 жыл бұрын

keep it simple bro! doesn't have to be fancy to classify. www.amazon.com/ASR-Outdoor-Sifting-Classifier-Prospect/dp/B06XJCQNZ8/ref=sr_1_1?ie=UTF8&qid=1550972115&sr=8-1&keywords=gold%2Bclassifiers%2Bset&th=1&psc=1

❤❤❤

Center vial sure looks like Iron Pyrite..

did u find any Gold useing this

How many watts has the pump? In my country, is not written on the pump the amount of waterflow. Only watts

@pacificnorthwestprospector5039

5 жыл бұрын

flaviuvacanta1 good question. Not sure it didn’t say on it but it is a half inch in diameter and pretty small.

I will post another video showing a clean out with gold in it. This one I wanted to focus more on saving $400 smackers cause Blue bowls will break your bank if you actually have to buy one.

What kind of pump is that? Where did you get it? How many GPM? Brand name? Bought at Wall-mart?

@pacificnorthwestprospector5039

8 жыл бұрын

120 gph eco pump from hydro store. a simple valve after pump to control flow.

Aren't you concerned that the water pump will pick up discharged floating bits and put it back into the cake tin, thus making the water muddier?

No answer as to how you cut the cone????

@pacificnorthwestprospector5039

8 жыл бұрын

I used a pipe cutter then a file. should of showed it sorry.

Yes how did you cut the cone?

@Nomadicsage1

6 жыл бұрын

doug johnsonj with a cutting tool

@richardsmith6769

3 жыл бұрын

Your answer is just being a smart alic and sucks

"Blue Bucket"??? LOL

How did you cut the cone down? What are the specs on the pump?

@pacificnorthwestprospector5039

5 жыл бұрын

cowboyliving saws all and a file.

Funny I see this after I just got a blue bowl. But I only paid 35$ so not to bad

@pacificnorthwestprospector5039

5 жыл бұрын

nhra gold if I would of found a real one for that price I would of never had to come up with this! Good find my friend👍🏻👍🏻

@nhragold1922

5 жыл бұрын

Pacific Northwest Prospectors right! I'm pretty happy about it

@MichaelJohnson-ux7pe

4 жыл бұрын

Do you have a web site where you bought your bowl? I tried (Pacific Northwest Prospectors) and could not find them.

I am having the hardest time getting the recipe for aqua regia. I'm on a budget but I have all the things you told me about for the bucket. Haven't made it yet. Can you tell me the homemade recipe. What , how much, and when, exactly if you know the formula. My head is spinning from all the info I have learned. I just haven't seen on

@Alex-kp3hr

Жыл бұрын

Simple HCL + Nitric 2:1 ratio. or HCl + sodium nitrate

guys just buy a blue bowl and be happier. i got mine for like 60 bux brand new. get it without the extra stuff and use your own pump. youll spend more trying to make your own with less results. the blue bowl is almost impossible to lose gold if used properly. it is also far from the best tool to use depending on the material too. so instead of spending time money and energy for something thats not as good buy the real thing or buy something better. ive made my own equip too and their some of the best functioning things i have. but my next piece of equipment will be purchased. its tried and true results and for only a little more than the cost of materials i can have the whole machine with no flaws. its not worth the time in this case.

@pacificnorthwestprospector5039

9 ай бұрын

Put a link up of your $60 dollar blue bowl. When this video was made they retailed for almost $300.

@chehystpewpur4754

9 ай бұрын

@@pacificnorthwestprospector5039 no you just dont do your research here are 2 examples 2 years after i purchased maybe like 1.5 years but point still stand. like i said you get it without all the extra crap. and you literally cant make a better one for less. yeah you could spend in some peoples cases valuable man hours making your own. but when one hour outweighs the cost of the product or a replacement when it wears out. then you keep being productive. dont combat people trying to help. im sharing useful info for people who need to know. we can act our age our shoe size or we can lie on our backs and see whose taller. i have yet to lose on the last one but we cant win them all. im here to tell you a cake pan for somewhere around 30-35 dollars and tools to mod and time and risk of losing fingers or limbs like some folks that shouldnt be using tools. literally a few more dollars for real r and d and proven results is worth it. but my next piece of equipment will cost much less. do i want to build my own version like i usually do yes. but single digit losses and i dont have to babysit it yeah worth every penny. i have my own things that are of my design that make it 10x more effective and guess what. i can run alot of material in an hour while working that way. vs staring at a bowl of water that makes me pee more than anything. the cake pan is just gonna make you hungry.

@chehystpewpur4754

9 ай бұрын

@@pacificnorthwestprospector5039 i linked 2 and my comment has been removed by this morning for any of you wondering. idk if it was the op or youtube but thats pretty strange.

Water inlet way too low. You can see how it it is disrupting the sediment along the bottom. The outer ring of sediment should be consistent all of the way around.

How did you cut the center out of the bowl? And punch a hole.... LOL you left out the important parts

@pacificnorthwestprospector5039

8 жыл бұрын

I used a pipe cutter and a file for the center, sorry should of showed it. As for the hole in the side I used a drill bit and a piece of wooden dowel. Drilled the hole to match the hose diameter and used the wooden dowel to bend the whole to the right angle. Good luck hope that helps!

@eeanderson49

8 жыл бұрын

might want to add a pvc coupling on top of the cut cone to assure a level and clean exit hole, then you don't have to be so careful cutting the cone.

@justinchapman3702

6 жыл бұрын

+Pacific Northwest Pr ospectors

lol die pumpe ist viel zu schwach :D trau nie einen Ty vid :D

Can't get the bucket from. Floating up , can't get it to go level. How about you shoe us how it actually works because I can't get it to work period!

@pacificnorthwestprospector5039

9 ай бұрын

Try drilling more holes in the bucket. The video is pretty clear on construction and function if you watch it all the way. Nothing should float.

No, I didn't see any gold.

HINT........ METAL BOWL DOS NOT WORK WELL...

@Alex-kp3hr

Жыл бұрын

why?

@Alex-kp3hr

Жыл бұрын

I think what Heinz means is that cake tins are usually made from tin and tin will eventually rust in water. So plastic is better. Try finding a plastic bowl and a plastic funnel that has a rounded sides. Cut the funnel to size and cut a hole in the plastic bowl to size. Invert the funnel and glue together with clear silicon glue.