DIY Cessna RC airplane
Тәжірибелік нұсқаулар және стиль
How to make RC Cessna plane (easy homemade trainer aircraft for beginners) DIY step by step build process tutorial
Specifications:
Wingspan: 970 mm (38")
Weight: 170g
Material: 4 mm XPS foam (or Depron) with 1,5 mm balsa longeron
Motor: 1306 3100KV (12g)
FlySky FS2A 4CH mini receiver (2g)
ESC 12A
2 Servo
Battery: 2S 350mah (21g)
Propeller: 6030
Download RC plane plans: numavig.com/plans/Cessna/
Пікірлер: 506
Well NumaVIG, my 8yr old saw this and asked if he could do it. He finished it today with only a little bit of help from me and it flies wonderfully! Thank you so much for all the joy of a weekend in the shed and all the flying to come.
Nice! Thank you so much for not having loud unnecessary music.
Its so refreshing to watch a video without the rubbish music playing
@Blizofoz45
4 жыл бұрын
I subbed for that reason alone!
@martin.k240
4 жыл бұрын
Yeah....
@larrysouthern5098
4 жыл бұрын
Yep....
@alphabravorc1003
3 жыл бұрын
Ikr
@j.elders2880
3 жыл бұрын
@Nobody else but me atleast some text on the screen maybe
Who needs to translate any language here? This is an awesome video of a fun build. Everything you need to know is here. *WELL DONE!*
This is one of those Extremely satisfying videos
@Rohit-wu5pg
4 жыл бұрын
Sir which transmiter,reciver use & where it available I m in India. I m biggener
@carlalegado6225
4 жыл бұрын
@@Rohit-wu5pg buy in ebay, any transmitter will do, the cheap ones will do if ur a beginner
Hi NumaVIG! Congratulations: clip of high quality! very easy to understand even for néophytes, clean and precise construction, but a hartbreaking end! waiting for the next clip!
この動画を参考にして作って見ました!とても飛びます! ありがとうございます😊
I love this! Proper DIY plane built out of everyday stuff. Great work!
@John-mk4mk
2 жыл бұрын
all diy rc planes are built out of every day stuff
@rishi7573
Ай бұрын
@@John-mk4mkNot all, many DIY RC's require a special type of foam board that is not so easy to find. This type of foam you can find in literally every hardware and decoration store.
Very good DIY demonstration video. The entire detailed assembly with the various controls is well planed, done and recorded so well with great finesse of work. Even I get ideas and ways of doing seeing from portions of your work. Superb!
Beautifully built, shot and edited! Even though I prefer parkjet/prop-in-slot style planes to conventional monoplane layouts, I watched the whole thing because the video was so good. :D Masterpiece!
Working on my cessna. Body almost complete. Too bad can’t post a picture. Very easy build. Thanks for sharing the plans.
Вот и Толстой пригодился. Шикарное видео без лишней болтологии.
@vitgo
4 жыл бұрын
угу, только все таки так клеить нельзя.. по крайней мере в моделях где есть хоть какая то культура веса...
@jurisru
4 жыл бұрын
@@vitgo вы не стесняйтесь, указываете моменты с таймингом и пояснениями, что и как сделать лучше :-)
@danil6847
4 жыл бұрын
@@vitgo а можно раскрой попросить? :)
Elegant and clean builds. Thank you.
Straight up no bull . Thanks Numa I like your style and l like the Cessna .
good work! BRAVO clean and precise. tip1- conecting end connections to rudder and elevator use HEAT SHRINK instead, you can calibrate and heat it on the spot you waant. tip2- HOT GLUE with gun goes well with foam and dries fast.
Lovely project to do with my grandchild plus one could hear the natural sounds. Thanks.
Thanks for sharing a remarkable video, this one of the best I'd even watched, very enjoyable.
Lovely video. Thanks for not adding music. Natural sound is the best.
@NumaVIG
4 жыл бұрын
I think so too
Thanks for sharing!, That tape idea for the control surfaces is a great idea!
Very nice looking build and attention to detail. I actually got really excited thinking you was going to build a wing the traditional way with ribs and spars. Oh well. Great work! I am subscribed now.
after watching your vid this is the first one i built. Have built some more of yours since. You got me on a roll,Cheers
Very nice Build!! I really like your techniques.
Excellent! Thanks for giving me an option to buying a kit!
Gran vídeo y gran campo de vuelo, me recuerda a mi pueblo con los chopos de fondo. Gran avión que intentare construir. Un saludo
Very good tutorial. Thank you! I've made the plane from 6mm depron for fuselage and 4mm for the wing cover, in the wings 6mm spars + 3 mm balsa. I've also added flaperons and safe with 6ch ar636. With 1300mah battery and 2400kv motor it flies like a dream and lands on a dime with 30% flaps in. It weights around 650g. All and all great tutorial, great technique, awesome design! If wouldn't you, I wouldn't start flying. Thank you.
@pinchonalizo
4 жыл бұрын
Hi! When you purchased the motor, do you know what orientation to get the threads in? clockwise or conterclockwise?
@oneistar6661
4 жыл бұрын
@@pinchonalizo As per plans it's Clockwise as all common motors and propellers is. It flew great with 2205s/2300kv and 7x3.5 cw prop. Have fun building.
@oneistar6661
4 жыл бұрын
@@pinchonalizo Threads tightens when motor is cw, so the shaft threads are like in any normlal bolt
@naveendinakaran3814
3 жыл бұрын
pls help me with the wings length
@oneistar6661
3 жыл бұрын
@@naveendinakaran3814 Hey man, I made it 52cm each, 104 total length of the wing. Just make sure to make wing spars length accordingly.
Hi Numavig! just to let you know that this plane finally flew with the help of some people from the local RC club (there's a lot of things I didn't understand at first) I have to remake it anyways because of a few problems, thanks so much for getting me started in this hobby!
I adore your videos! They are entertaining and thoughrouly enjoyable! I am sure many others think the same! I also love your own designs!!! Keep it up and happy flying...
Enjoy your channel greatly, very informative lots of great builds. Thanks.
Nice work, some interesting build techniques and materials 🧐
Very clean build. Thanks
the detailed section on wings is so helpful
Отличное видео, приятно смотреть. Лайк за Л.Н. Толстого
This construction of this plan and the video is a great job
Bem simples e fácil, eita, rádio FlySky é uma mãe mesmo viu
Neat flyer,nice video tutorial too.
Nice job will have to have a go at this one.
felicitaciones..... muy prolijo tu trabajo.... un abrazo
cara sou brasileiro e ja curti seu canal, sem uma palavra consegui entender tudo, vou tentar fazer seus aeros muito show... londrina no Paraná
Very nice video and a lovely little plane!
This is amazing and I enjoyed it very much. Always looking forward to new adventures on your channel. Thanks very much! : )
You just got over on Josh Bixler without saying a word. Good work. But we still love Josh.
@NumaVIG
4 жыл бұрын
Less Talk More Action!
Bro, u r one of the best I have seen
Such a positive comment section I hope I can get my channel off the ground doing stuff like this
Ну наконец-то хоть одно видео БЕЗ ДУРАЦКОЙ МУЗЫКИ.
@user-pc3rm4uy9t
4 жыл бұрын
Согласен
@Serpolio
4 жыл бұрын
Да ладно, звук шуршания плитки тоже не идеальная замена🤗 Хотя так работа чувствуется прям как сам скребешь))))
@pavelgurenchuk2225
3 жыл бұрын
@@Serpolio Я когда сморю, у меня супругу выворачивает. Говорит, как будто пенопластом по стеклу.
Great build and video.
Вы супер! Вы мой учитель! 👍🏻👍🏻👍🏻👍🏻👍🏻
Buen video Me gustaría ver más vídeos sobre aviones Buen trabajo
I'm gonna get into a good competitor!
Как всегда отличная модель, молодец так держать. (на этот раз из потолочки а не из подложки под ламинат).
@NumaVIG
4 жыл бұрын
захотелось белый, типа Депрон, а подложка вся разноцветная, но следующий оранжевый будет
Grazie mille .sono un principiante ..mi siete stati di un grande aiuto..
Perfection!
I wouldn'd use Tolostoi books as pressure weight :-D, ordered all material and can't wait to replicate your great job
@pinchonalizo
4 жыл бұрын
Hi! im looking to do the same! How do you know if the motor you need will be clockwise or counterclockwise screw thread?
@SuperME10001
4 жыл бұрын
May i ask about how much the orders came out to cost?
crayzy build ;) sooo light! ;)
Is it possible to make ailerons on this project if I want to do them? Thank you
I have a question what is the length of both wing halves I’m a little confuse on the wing construction about to start my build
What do you call that clear adhesive you used? Thanks
Brilliant work.can i use balsa 3mm instead of foam ?
С новыми законами о БВС, теперь только и остаётся моделистам, что выезжать подальше в лес и там пускать свои модели, а иначе за несогласованный полет да ещё без регистрации ууу... Автору лайк!!!
Молодец. Лев Толстой памагает тоже 😃
Nice save!
wow, so light, and only 2 servos, and even 1 meter wingspan :)
Nice project bro, every detail is perfect. I like the landing wheel, even it's not useable on this video. Good job 👍
@NumaVIG
4 жыл бұрын
there is some problems to find the runway in the forest
Great vid what is the length of the wings?
I’d love to make this plane. You make it look so easy . Thanks for sharing . Saved the video to watch again later incase I decide to make one lol . Great channel brother keep the videos rolling.
Hello,on the video the wingtips are not the same as on the plan, should this change be made? If yes, how?
thats beautiful
do you think that we can put a go pro inside ?
Thanx very much best vid I have seen yet
How did you connect the electronics you used. Esc, servo, receiver and transmitter, motor. Pls help🤔🤔
Great designing and building. What glue do you use?
I build this rc plane in Styrofoam sheet the full weight of the my plane is 1350grams so what kind of motor I want to buy? Or a2212 2700kv motor in 10" Props is enough for my plane????
Subscribed, He's good and thanks
Where do I get all the equipment for the controls please?
Sir which transmiter,reciver use
Wow....amazing
Which transmitter are u using?
Super video thanks...
Great work by the way
Fantastico. Bravissimo
Where on earth do I buy 4mm XPS foam or depron? & What glue is used (that doesn't dissolve the foam). Sanding noise is a bit excruciating, otherwise lack of weird music 👍
good job friend i like it
Were do you get you foam?
Nice build 👌😄
Is there a specific glue used I every video
good tutorial
thanks for sharing , I'm gonna make some shopping but before that , May I have an idea about the glue you are using for depron ? seem better than UHU Por . thanks in advance for you answer , regards from Belgium
@NumaVIG
4 жыл бұрын
I don't know, I didn't use UHU Por
How long does it fly with that battery?? Please reply as soon as possible
You should try painting it, I think light gray with red lines should go nice.
Hello, can you just say what is thé lenght of the aileron? Thanks
if photoblock. 1000kv motor, 2s lipo battery, 30A ESC. is it OK?
It would be nice if you add photos of the plane. very nice, thank you.
You should use Dostoevsky as it's heavier literature :) Great plane indeed, very well constructed. I would tape the plane before starting to glue it. Well done!
Круто) попробую сделать свой с братьями
can you use a 5200mah battery?
Gracias por los planos muy bueno
I'm looking to start in the hobby, do you think this is a good and easy enough model to build to get in to RC aircraft?
@m.s.aviation7065
3 жыл бұрын
As a first building project, yes. As a flyer, maybe not. I would recommend getting a flight simulator first and practicing. And if you've got any more questions you can message me on Discord ( there is a link to my server in the desc of my latest video) and I would be more than happy to help!
Thank you for the video and for plans! Few days ago I have build it and it flies very well. I used EPP instead of depron and I increased the wingspan to 120cm to make it slower and better at gliding ;)
@thehikingbuddy4525
2 жыл бұрын
Hi, do you think I can make mine 45 inches instead of 51 like yours? Thanks
Awesome plane sir Sir which glue or adhesive you are using in syringe
@NumaVIG
3 жыл бұрын
UHU Por
Very inspiring
Amazing