Never seen this channel before, but I gotta say, the video is really high quality production and the pacing of the video is just perfect to neither get bored nor lacking of information! Great video and great content!

@craftedworkshop

7 жыл бұрын

Thanks a bunch! That kind of feedback really means a lot. I'm still fairly new to the scene but am hoping to continue growing like I have been. Spread the word!

@lillyanneserrelio2187

4 жыл бұрын

My 1st technical video which KZread recommended from watching a bike review and i LOVED ❤️💕😍it! I don't own any power tools so will probably have Home Depot do all the wood cuts but I'm EXCITED to give this project a try (going to cheat with making the french cubby and use a plastic 3 drawer Rubbermaid brand although I already miss not having that custom shelf spacing flexibility) Thanks for showing every step and not assuming anything. I would never have known to pre drill holes before trying to thread in the hooks or to drill plywood to avoid cracking. also the leveler thing is smart. I can't tell you how long it takes me to get a picture frame to hang evenly on my wall by only trying to eyeball it. Sincerely, your newest subscriber ;)

@edling8294

3 жыл бұрын

I like the way you commented on this can you this one out too? kzread.info/dash/bejne/nKVh0MqYgbOfk6w.html

@meltemtuna2134

3 ай бұрын

Best video on bike rack diy! Thanks

Nice, clean, simple solution. Good stuff.

@craftedworkshop

7 жыл бұрын

Thanks man!

@edling8294

3 жыл бұрын

I like your reply would you like to check this out and see what you can say kzread.info/dash/bejne/nKVh0MqYgbOfk6w.html

Awesome, thanks for posting. I started both mountain bike and Woodworking a year+ ago and now have a few bikes. This is the perfect project for me. :)

@edling8294

3 жыл бұрын

Great comment, can you check this one out and let me know your thoughts kzread.info/dash/bejne/nKVh0MqYgbOfk6w.html

Great project. I did the same since we have 7 bikes. 3 are for my kids. I also made some angled shelves for them to grab helmets and shoes. Speaking of that. Time for a ride!

@craftedworkshop

7 жыл бұрын

Nice! Have fun!

Thanks so much mate. My 4 year old son and I followed your instructions and put our racks up on the weekend. Works a treat!

@craftedworkshop

7 жыл бұрын

+duffman17011990 awesome!

Combining my two favorite things: bikes and woodworking.

Nice simple cheap straight forward and well produced. Great job again Johnny.

@craftedworkshop

7 жыл бұрын

+ManCraftingTM thanks!

exactly what I needed for my family 5 bikes!!! Thank you!

I did a rack like that for the kids bikes and I wish I'd seen your video first. Very good ideas on spacing and staggering the two 2x4s. Nicely done.

@craftedworkshop

7 жыл бұрын

+Hugo Danilo thanks!

Awesome job, Johnny! Thank you for the step by step instruction. I had to give it a go.

@craftedworkshop

6 жыл бұрын

+Richard Garcia awesome!

I looked at your video and said... yup this is cheap and easy. Have your tools and took me no time. Thank you for the help on spacing.

@craftedworkshop

7 жыл бұрын

+Yves Seguin awesome, glad I could help!

Simple, cheap, effective. The best type of diy project.

Thanks for the great idea. I was looking for a space saving upright wall mount for a couple bicycles in my garage. Nicely done video.

@edling8294

3 жыл бұрын

do you think this one is space saver too? kzread.info/dash/bejne/nKVh0MqYgbOfk6w.html

Just finished building. Quick tip: Don't just use the cheapest hooks you can find. It makes a diffrence! The large square ones sag alot which you need to account for. They also allow the bikes to slide around which throws off the spacing. The smaller curved ones seem to hold bikes in place just fine. Thanks for the video! 👍

Great video. I made a similar system for hanging my numerous bikes but didn't think to stagger the height of the hooks. The one useful addition I made was to make it so I could secure the bikes. I fastened another 2x4 at crank height. I attached rings to this 2x4 which lets me use cable locks to lock the bikes. It is super easy to unlock and remove whatever bike I would like to ride. While this will not deter a seasoned bike thief, it will certainly keep people from helping themselves when the garage door is open.

@craftedworkshop

7 жыл бұрын

+Steve Taylor nice, that's a great addition.

This is a really great and concise video. Thanks so much for making this!

@craftedworkshop

7 жыл бұрын

+David Blakeman no problem, glad you enjoyed it!

Thanks. This video popped up just as I bought a new bike and ran into the same issue in my garage. Perfect solution!

@craftedworkshop

7 жыл бұрын

+Michael Clark thanks!

I used your idea/dimensions and added a few things. I did it with just a single 3/4” sheet of plywood and cut two longitudinal 4” pieces to build up the hook lines. I added stain and poly to match the garage doors. Thanks for the inspiration.

@edling8294

3 жыл бұрын

Nice one. would you be able to consider doing this one if haven't finished your project? kzread.info/dash/bejne/nKVh0MqYgbOfk6w.html

Thank you for the great idea! Very easy to follow and adapt to my size (6') for our garage space! Also very compact to hold more bikes than a premade one!

@craftedworkshop

2 жыл бұрын

No problem, still using mine years later after moving to a different house!

followed this and now have a very nice bike rack in my garage, thanks for sharing!

@craftedworkshop

7 жыл бұрын

+Tony Fernandez awesome! If you post it on social media, tag me @craftedworkshop

@TonyFernandezjkdjedi

7 жыл бұрын

Crafted Workshop done!

@WelcomeToJ

6 жыл бұрын

Same! Thanks Johnny! Very happy with ours :)

@wendywu2199

5 жыл бұрын

I m going to build five

Thanks for the video. I built a 6 ft version for 4 bikes today. Works great. Cost: $8.00 for the hooks. Already had the wood on hand from prior projects.

@edling8294

3 жыл бұрын

good for you. can you take a look of this one? kzread.info/dash/bejne/nKVh0MqYgbOfk6w.html

Looks good and organized. Thanks for sharing👍

Nice Bikes and video Johnny

@craftedworkshop

7 жыл бұрын

+Jon Peters Art & Home thanks Jon!

I have never seen this channel before but I really Love how you made your video! You made it quick getting to the point I didn't get bored nor did I miss anything and I was able to keep up. 😎 Your editing made me laugh in a good way 😅 You're really good at building stuff. You should consider carpeting a small business 🤠

@craftedworkshop

5 жыл бұрын

Thanks a lot!

very well done and informative! Cheers!!

Video is 4 years and still helping thanks man!!

Man, You are a genius!

Great Video, gonna get started on a few of the ideas that you have shown to store my MTB in my very small flat, Many thanks and keep the ideas coming looking forward to future vids cheers.

@craftedworkshop

7 жыл бұрын

+JAMES WEBSTER thanks!

Thanks for the inspiration and roadmap for a quick and super satisfying weekend project!

@craftedworkshop

4 жыл бұрын

You bet!

Great and cheap solution! Love the bike collection, too :)

@craftedworkshop

7 жыл бұрын

Thanks!

Not sure why it took me so long to think about looking here for a bike storage solution. Knowing you have done stuff with Seth I should have also known you may have something bike related for storage. I have been trying to come up with an idea to store my 7+ bikes in the least amount of room possible but still be able to get to them with ease. I am also renting so had been planning on building something free standing but at this point this is a way better solution and ... Spackle for the move/win haha. Thanks for this amazing video and I also love the shelf idea, only wish I had picked up the table saw someone was giving away last week. Looking forward to you and @Seth's Bike Hacks doing another video

Wow, great wood work! Great video. Thank you!

@craftedworkshop

7 жыл бұрын

+Sanj Gunetileke thanks!

Cool project and great video quality. Thanks to Seth's bike hacks for introducing me to your channel.

@craftedworkshop

6 жыл бұрын

Thanks, welcome to the channel!

@user-si3vr5gv8l

5 жыл бұрын

I agree, and no British accents, with no articulation

@MrKfq269

4 жыл бұрын

Seth is awesome.

It's like watching a extended 'satisfying to watch video' but better and with purpose 🙂

@edling8294

3 жыл бұрын

great comment. let me know your thought about this one. kzread.info/dash/bejne/nKVh0MqYgbOfk6w.html

LOL...I WAS wondering about the tear out on the plywood. I know you would not let that happen even with a "garage" project. I breathed a sigh of relief when you cleared that up for us. =) Great project you have given me an idea for the 6 bikes (sometimes more depending on how many kids friends are over) I have floating around my garage.

@craftedworkshop

7 жыл бұрын

Hah, yea man I won't be having them cut my expensive plywood again.

Very nice! The cabinet was also a great idea! Impressive!!👍😀

@craftedworkshop

7 жыл бұрын

+Arizona thanks!

Thank you for the video. Just completed my own version today and it works great. With mountain bikes, I find you do need to be careful about scraping the tip of the hooks as the coating can come off. I am not a craftsman type by any measure and this only took me 3 hours to complete..including going to get the wood.

@craftedworkshop

6 жыл бұрын

+Brian Suter that's great, glad the video helped!

Thanks for posting this video! I watched it and did exactly what you showed! Thanks!

@edling8294

3 жыл бұрын

Application is the key right? Would you consider doing this too if you haven't finished doing yours? kzread.info/dash/bejne/nKVh0MqYgbOfk6w.html

This awesome I just did mine! Thank you for sharing

@craftedworkshop

6 жыл бұрын

Nice, glad it was helpful Michael!

@edling8294

3 жыл бұрын

good for you. would you consider doing this one if you saw it earlier? kzread.info/dash/bejne/nKVh0MqYgbOfk6w.html

Thanks for the tutorial, I just built this in my garage this morning! I always worried about hanging my bikes by the rim, but the LBS where I bought my mountain bike does the same thing.

@craftedworkshop

7 жыл бұрын

+LittleDally nice! Yea these hooks are nicely padded, I'm still using this rack.

@craftedworkshop

7 жыл бұрын

+LittleDally nice! It's a great rack, still use mine almost a year later.

Saw you on Seths channel doing the e-Bike thing, PROMPTLY came looking for your channel when I heard you were into woodworking. Turns out I had visited this channel before and I actually BUILT your bike storage solution TODAY BEFORE I saw the video. Its a good thing I already subscribed. GREAT STUFF man.

@edling8294

3 жыл бұрын

good you already apply it. let me know your thought about this one kzread.info/dash/bejne/nKVh0MqYgbOfk6w.html

What a fabulous workshop. This man is THE BUSINESS.

@craftedworkshop

7 жыл бұрын

+Ystadcop hah, thanks!

I know this is an old post, but this solution worked perfect for me. I just wanted to thank you for making this video, it took all the guess work out, and really helped.

Dayum. This is such an "elegant" solution (simple, efficient, etc.) and sooo much better than hanging our bikes from the rafters in our garage...(insert visual from a horror movie of a room full of hanging, rusty but sharp tools swinging all over the place).

Looks great! Cool design.

@craftedworkshop

7 жыл бұрын

+Bruce A. Ulrich thanks Bruce!

I think you are the new standard for just-the-requisite-facts-ma'am no bullshit instructional video. Thank you & please keep up the good and necessary (and no-bullshit) work.

I did this years ago in my garage and it worked well. I used to have 20 bikes in my garage and still could park 2 cars.

@edling8294

3 жыл бұрын

Wow! i bet you have big garage though. Let me know your thought about this one. kzread.info/dash/bejne/nKVh0MqYgbOfk6w.html

Nicely done!

@craftedworkshop

7 жыл бұрын

Thanks man!

It's easy when you know! ( and have the tools) looks neat I must say bravo.

@craftedworkshop

7 жыл бұрын

+jr M thanks!

Great video! Looking for a DIY way to store EIGHT bikes for myself, may give this a shot.

Just looking for bike storage ideas for our garage, was happy to find you had a video!

@edling8294

3 жыл бұрын

Are you done searching, mind if you check this one too? kzread.info/dash/bejne/nKVh0MqYgbOfk6w.html

Nice bike collection!

@craftedworkshop

7 жыл бұрын

Thanks James!

AWESOME PROJECT MY FRIEND GOOD JOB BRO :)

@craftedworkshop

7 жыл бұрын

Thanks TJ!

@TJSWOODWORKINGSHOP

7 жыл бұрын

No problem my friend :)

Sweet Rack! I recognize you from Seth's!

Love it dude!

Hey Johnny, great vid! We used your design in our garage and now we have a LEGIT (and pretty) bike rack. Thanks dude!!

@craftedworkshop

6 жыл бұрын

Nice, that’s awesome!

@kbanghart

6 жыл бұрын

Can you point out what part of the video shows the second attachment point for the bikes? I see the hooks at the top, but what keeps the lower part of the bike from moving... thanks.

@craftedworkshop

6 жыл бұрын

The lower part stays in place due to gravity, it doesn’t have any attachment points for the bottom.

@kbanghart

6 жыл бұрын

Crafted Workshop thanks

Saved me over $256CDN dollars in buying the monkey bar racks! I cut the 2x4x8 in half to make a bike rack and a rack for shovels and other tools. Total cost came to 44 dollars! My garage is now organized.

@edling8294

3 жыл бұрын

wow nice savings, would you consider doing this if you saw this earlier kzread.info/dash/bejne/nKVh0MqYgbOfk6w.html

Great informative video, just what I needed. Just wish I had your workshop and tools. 😉 🚴 .

@craftedworkshop

7 жыл бұрын

+David Bradbury thanks!

Thanks, good ideas!

I will learn to build one . Love it. Ty

@craftedworkshop

5 жыл бұрын

Good luck!

Nice build. make the space look much neater

@craftedworkshop

7 жыл бұрын

Thanks!

Nice efficient use of space.

@craftedworkshop

7 жыл бұрын

Thanks Charlie!

Cool project! When I saw the thumbnail pic for your video and then heard you say "French cleat" I thought you cut the entire rail with a 45 degree angle for both of the pieces with the bike hooks, that would have allowed you to hang other cabinets/shelves or accessories anywhere along the length of that wall. Great space-savings, I may copy this for the many bicycles that my kids, my wife, and I have!

@craftedworkshop

7 жыл бұрын

ChicoMillion that's a cool idea! Thanks!

Nice project Johnny!

@craftedworkshop

7 жыл бұрын

+donny carter thanks Donny!

Very handy project, man!

@craftedworkshop

7 жыл бұрын

+Humus Workshop thanks!

😢 actual, valuable, original content on KZread. Bless.

@craftedworkshop

5 жыл бұрын

Thanks!

Thanks for the video man, I just did that in my garage and I love it..

This video was really well done. Thanks!

@craftedworkshop

6 жыл бұрын

Thanks!

Very nice! thanx for taking the time to make this video!

@craftedworkshop

6 жыл бұрын

No problem Craig!

Nice indeed! cool solutions!

@craftedworkshop

7 жыл бұрын

+Cactus! workshop thanks!

i wish i had your skills, man. great work.

@craftedworkshop

7 жыл бұрын

+Guy Fir thanks!

Awesome video friend. Words of advice "push stick"

Could you do 1 Rail system? You would have to flip the bikes on the hooks. Handles Bars Up and then Handle Bars downward. That way more room on floors ?

@lowery02

4 жыл бұрын

Long Tran that’s the move, my 2 year old comment buddy!

Awesome! Very clean and concise - you talk well with a nice tinge of humor ;o)

@craftedworkshop

7 жыл бұрын

+Anil Kay thanks!

Nice setup

@craftedworkshop

7 жыл бұрын

Thanks!

Super clean!

@craftedworkshop

7 жыл бұрын

Thanks Dylan!

Nice shirt! I'm a huge Liga #9 fan .. .especially the robusto. Nice video too.

@craftedworkshop

5 жыл бұрын

Thanks! I used to work for Drew Estate, loved Liga!

Proper tools are everything.

Fantastic video. Nice work!!

@craftedworkshop

7 жыл бұрын

+KJMTB thanks!

Great content.

Thank you very much! The video helped me save some good money!

@craftedworkshop

5 жыл бұрын

Great!

I stopped in for the rack, but stayed for the bourbon shirt! Great video...cheers!

@craftedworkshop

4 жыл бұрын

Hah, thanks!

Great quality & super helpful, thanks

Well done!

Nice bike rack! I was wondering how much horizontal weight these hooks support?

Really helpful video, I was able to knock this out in an hour.

Cool video and rack. I made a similar style rack except mine stands on the floor. Your video is much more descriptive and higher quality than mine though. Might steal the cabinet idea though!

@craftedworkshop

5 жыл бұрын

Thanks!

nice simple idea

nice job Johnny.

@craftedworkshop

7 жыл бұрын

Thanks!

Hey, first one of these that I think is well thought out because you arrange the bikes in two rows. Could you have combined bike-hook with a french cleat system? Like ... screw hook into piece of wood and then hang that piece onto the cleat?

Thanks for a great video. A bit cheeky, but I'm only looking to store one bike: where did you find the white-orange bike wheel clip on the wall that you had to start with?

Awesome 👏

Excellent home project 👌...thanks very much

Great video! I just don’t get the purpose of “safety screw” Is it supposed to go through the dowel? 1:51

@edling8294

3 жыл бұрын

Nice comment, can you take a look at this one and let me know what can you say? kzread.info/dash/bejne/nKVh0MqYgbOfk6w.html thanks!

Hi! Great video! Could I ask please what your original wall storage clips are called? The white and orange ones.

VERY COOL! I used to be a BICYCLE SHOP MANAGER in Virginia Beach Virginia, and that's pretty much how many bicycle shops hang there bikes. Especially the smaller bicycle shops. Great video, and I just SUBSCRIBED to your channel. KEEP THE RUBBER SIDE DOWN! Later.

@craftedworkshop

7 жыл бұрын

+UBER 757 thanks man! I worked in a shop for a few years as well.

This was so helpful, thanks

Great video. Def want to do something like this.

@craftedworkshop

7 жыл бұрын

+Carlos Almendárez thanks, have fun!

love your skill

@craftedworkshop

7 жыл бұрын

+JaydSpecs thanks!

Nice job!

@craftedworkshop

7 жыл бұрын

+Fred McIntyre thanks Fred!