DIY Battery Powered Bluetooth Speaker // How To Build - Woodworking
Тәжірибелік нұсқаулар және стиль
Thank you to Bernzomatic for sponsoring this video. Learn more about the ST2200 Detail Torch (bit.ly/2Sf5NRJ) and ST500 Soldering Iron (bit.ly/2zwY9LA). #sponsored // Check out Festool's amazing power tools here: bit.ly/festooldealers
Blog Post with Detail Electronics Explanation : craftedworkshop.com/blog/how-... I built this rechargeable, battery-powered, portable Bluetooth boombox speaker using the Parts Express C-Note speaker kit plus their KAB amp board (links to all parts below). This was my first speaker build and I am honestly amazed at how awesome this thing sounds.
🎧 Thanks to Kirby Meets Audio for helping out with the planning, check his channel out here: / @kirbymeetsaudio
💰This boombox design is heavily inspired by this boombox by The Hifi Case, if you want to purchase a speaker like this one, go check their's out : bit.ly/modern-boombox
👕 Get your Build It Yourself merch! bit.ly/BuildItYourselfMerch
📦 Materials Used On The Bluetooth Speaker (affiliate):
Parts Express C-Note Bookshelf Speaker Kit : amzn.to/2QiKQIz
Dayton Audio KAB-250v3 Amplifier Board: amzn.to/2TRz06Z
Dayton Audio KAB-FC Function Cables Package: amzn.to/2TTn04L
Dayton Audio KAB-BE 18650 Battery Extension Board: amzn.to/2E1JgFc
Dayton Audio KAB-PMV3 Panel Mount (this wasn't available when I built my boombox, would have simplified things): amzn.to/2QofeRL
Sonic Barrier 1/2 Acoustic Foam (needed 2 sheets): amzn.to/2P7nbGa
White Perforated Crossover Board: amzn.to/2E3B9bb
Black Screws : amzn.to/2zoUek7
2.5mm Panel Mount DC Jack : amzn.to/2PY20vv
Volume Knob : amzn.to/2TSpGzJ
18650 Batteries : www.parts-express.com/18650-2...
Power Supply : www.parts-express.com/19-vdc-...
Rubber Feet : www.parts-express.com/penn-el...
Crimp Terminals : www.parts-express.com/0110-(1...
Handle : www.parts-express.com/penn-el...
Wipe-On Poly : amzn.to/2DLZOA5
🛠 Tools Used On The Bluetooth Speaker (affiliate):
Festool Kapex Miter Saw : bit.ly/festooldealers
Festool CXS Cordless Drill : amzn.to/2wOFM2S
Festool PDC 18/4 Cordless Drill : amzn.to/2M09OWU
Festool ETS EC 150/5 Sander : amzn.to/2oHOmg7
Festool OF 1400 Router : amzn.to/2M6ynmb
Powermatic 15HH Planer : bit.ly/Powermatic15HH
Powermatic PJ-882HH Jointer : bit.ly/PJ882HH
Inventables X-Carve : bit.ly/xcarvecrafted
3/8" Radius Roundover Bit : amzn.to/2P1Hoxb
Flush Trim Bit : amzn.to/2QlU5Ym
Parallel Clamps : amzn.to/2OjcdRs
Countersink Bit : amzn.to/2vcaL93
Bandsaw Featherboard : amzn.to/2RkES7c
Table Saw Featherboard : amzn.to/2zqbbdS
Digital Angle Gauge : amzn.to/2E3iwDY
📹 SUBSCRIBE : goo.gl/V5gcNJ
💰 SUPPORT ME : goo.gl/pmmpTQ
📲 FOLLOW CRAFTED WORKSHOP!
INSTAGRAM: / craftedworkshop
FACEBOOK: / craftedworkshop
TWITTER: / craftedworkshop
PINTEREST: / craftedworkshop
Пікірлер: 441
Blog Post with Detail Electronics Explanation : craftedworkshop.com/blog/how-to-build-diy-battery-powered-bluetooth-speaker
@entrology4661
5 жыл бұрын
bit.ly/2TKmzK3?-outdoorrr-shedsss
If it sounds anything like it looks, it must be amazing. Such an awesome project!
@craftedworkshop
5 жыл бұрын
Trail Features thanks man!
I've watched bunches of videos like this, I built 7 boomboxes on my own and I can officially say that this is the best one I've ever seen, good job!
That is an awesome build! Classic look with new tech. Great video, thanks!
Looks great man! I’ve been wanting to build one like this for some time now! I’m very happy you went with walnut, it’s a beautiful wood that looks great for this type of thing!
This woodworking is remarkable, keep up the good work!
Nice to see someone who uses dampening material to improve sound. Also, that is a crazy cool shop. And, you have some sick skills. Beautiful build.
excellent craftsmanship, a very nice shop, congrats, that was a nice boombox, all elegant. well builted.
Wow - Awesome. It's so refreshing to see a speaker build by a woodworker. Accuracy, detail and great looks.
@craftedworkshop
5 жыл бұрын
Thanks a lot Danny!
I have never seen this kind of speaker before, it's just amazing
Love watching how skillfully you put this awesome speaker project together. Great job!
@craftedworkshop
5 жыл бұрын
Thanks a lot!
Such a dope project dude. Nice work on this! I’ve been wanting to make one for myself for a long time now.
@craftedworkshop
5 жыл бұрын
Tennessee Builds thanks, go for it!
Looks super awesome can’t Johnny. I love the heavy round over.
@craftedworkshop
5 жыл бұрын
Mortgage & Mitre thanks!
Great fun building three of these. Two went to my boys as Christmas gifts. The other is for my wife and me to use at lake side in the North Georgia mountains.
Super cool. Love that you adapted the kit to a boom box size. Impressive work.
@craftedworkshop
5 жыл бұрын
Luke Dorny thanks Luke, definitely a fun project!
DUDE!!!!!!!! Great project and she is Beautiful I’m heading to my shop now to take a set of 18yr old computer speakers my good friend Dave gave last week and do the same. Unbelievable that he has had them that long and they sound great. They come with a separate subwoofer.
My first job was soldering audio jacks for an entire summer so I got pretty good at it. I ended up working at that place for almost 10 years. I'd say you did a really good job for your first time soldering. Here are my two biggest tips: 1 - put a dab of solder on the tip of the gun before touching it to the wires. This helps transmit heat from the iron to the wire. You want the wires hot enough to melt the solder, otherwise you'll get a cold joint that could break or have lots of resistance. 2 - Use spring clamps to hold your parts. Just put them on their side and clamp the part in place.
@craftedworkshop
5 жыл бұрын
Thanks for the tips!
Nice project Johnny. That walnut looks amazing 👍🏼
That turned out sweet!! Love it.
Dang! Turned out so nicely Johnny! The walnut and heavy edge treatments really make it pop! Super modern looking.
@craftedworkshop
5 жыл бұрын
Adrian Orozco thanks Adrian!
AWESOME! really great man! Congrats!
This is a top 3 video for me that you've put out. Great job, I want to build one now!
@craftedworkshop
5 жыл бұрын
Jason Watts that’s awesome, thanks Jason! I really had fun building it.
Awesome build, Johnny! Curious to see how the walnut holds up with the vibration of the speakers. Keep us in the loop!
@craftedworkshop
5 жыл бұрын
Matthew Hicks thanks, definitely will! I think it should be totally fine, Fender uses Pine on a ton of their amp cabinets and clearly that’s working for them.
Sweet project Johnny. I’ve had speakers on my build list for a while, feeling inspired now.
@craftedworkshop
5 жыл бұрын
Craig Francis go for it, super rewarding build!
Nice. Love the overlapping bass and tweeters.
Great tip to flip the jointer faces!
That is gorgeous! Beautiful job!
Looks amazing Johnny .I'm pretty sure it sounds great too. That is something to be proud of
@craftedworkshop
5 жыл бұрын
Franks DIY thanks a lot, it definitely sounds awesome!
This is soooo cool!!! I love the way it turned out and that walnut is just gorgeous! Excellent, Johnny!
@craftedworkshop
5 жыл бұрын
Thanks Cris!
@doubledarefan
5 жыл бұрын
Build an amp for your Uke like this.
@craftedworkshop
5 жыл бұрын
Double Dare Fan YES! Even if she just rebuilt the cabinet and swapped the components from her amp over, that’d be awesome.
You truly are a master craftsman. I haven't seen a craftsman like you since the New Yankee Workshop on PBS back in the 90s.
@craftedworkshop
5 жыл бұрын
Thanks, Norm is my hero! Watched him with my dad growing up.
WOW! Great idea and excellent execution, I love this!
@craftedworkshop
5 жыл бұрын
Clint Strause thanks Clint!
Great project, looks awesome!!!! Can't get enough of your French cleat wall in the background. Best background of any KZreadr maker I follow.
@craftedworkshop
5 жыл бұрын
Jimmy z hah, thanks man! I love that wall, really the perfect background for a maker KZreadr.
Maybe my favorite project of yours to date. The Walnut looks so good and the round over bit turned out great too.
@craftedworkshop
5 жыл бұрын
Thanks a lot!
For more videos on speakers builds, can’t recommend Kirby Meets Audio enough!
@craftedworkshop
5 жыл бұрын
Ashley Bennett for sure! I linked him in the video description and cards, he helped with the planning of this build.
@ashjamben
5 жыл бұрын
Crafted Workshop Didn’t notice the link, kudos! Love his channel, apart from he never squats next to his finished builds 😂
@craftedworkshop
5 жыл бұрын
Hah!
OUTSTANDING! Think I'll build one myself now. Thanx for the confidence.
@craftedworkshop
5 жыл бұрын
Awesome, have fun!
Let me say... You are really impressed... Hah I am really impressed with the Bluetooth speakers that have been connected to batteries with a box that big and a sound loud enough to shatter a ear drum... Amazing project good luck.
i have the C-Note kit on my table right now. The walnut was a great choice!
@craftedworkshop
5 жыл бұрын
Shawn Trombley thanks Shawn, great kit for sure.
beautifully build, awesome!
Beautiful work!
I like how you used a crossover to better produce the low and high frequencies separately for a clearer and better soundstage audio output. The cabinet was also created flawlessly which is a nice combination for hifi audio.
@craftedworkshop
4 жыл бұрын
Thanks! The boombox sounds amazing and the battery life really is phenomenal.
just perfect build
Very nice speaker build. But most of us don't have all the fancy tools to do this. I built one out of plywood and car stereo media player and car speakers. 12 volt LiFEPo4 battery and charger and sounds great , no foam inside and an vent hole on front panel. did I mention it sounds great. Lots of bass and good overall full range sound. I use it at work on my tool box. I may build a second one for home use or to replace the one at work and use that at home. will see.
Very cool project Johnny!! It turned out looking great
@craftedworkshop
5 жыл бұрын
JT Woodworks thanks!
Nice build! The walnut is stunning and the build looks top notch!
@craftedworkshop
5 жыл бұрын
Shaun Guthrie thanks Shaun!
Really clean. I liked the router fix for the hole.
@craftedworkshop
5 жыл бұрын
Josh Desser thanks Josh!
Looks really good and sounds as good as it looks! Thanks!!
@craftedworkshop
5 жыл бұрын
Steven Kofoed thanks Steven!
Looks great! I like the sapwood at the bottom.
@craftedworkshop
5 жыл бұрын
StudioJLT thanks, that worked out nicely!
Looks amazing.
Just beautiful
Thanks Nice build
** dO It YoUrSelF ** with at least 100k worth of wood working tools...... :p
@mattivirta
4 жыл бұрын
normal MEN have all little cheap tools in home or garage and lot lot more tools too. no expensive, ewer no 100K haha. normal need only some clamps ,i have 4 pcs cheap and no need more. tablesaw have ewery normal men in home, same hand router, and hand planer, all other can do diy in home workshop, planer frame, jointer, circle jigs, no need lot tools can made all same.
@farrit
4 жыл бұрын
A lot of the tools in this are pure convenience. Almost all of these things can be done with hand tools.
@prescott231233
4 жыл бұрын
@@farrit thats how i make mine. i sure as hell aint got all these fancy tools.
@UNKNOWN-le2tu
4 жыл бұрын
yeah, if i had my dads table top drill press, table saw, radial arm saw, and table jig saw. he spent over 1 g's and 5 years to collect. all i have are hand saws and hand tools.
@UNKNOWN-le2tu
4 жыл бұрын
@@abalczon im going to make a portable radio into an ammunition can. i can power it with a 20amp 12 v power supply and power jacks found on amazon.
Looking badass! Can't go wrong with choosing walnut... so gorgeous.
@craftedworkshop
5 жыл бұрын
Thanks!
Love this build, looks amazing! Could you please share the finished dimensions of the speaker? Definitely adding this to my list to build, nicely done!
Great build Johnny! I'd love to bring a speaker like that to the beach, it looks awesome!
@craftedworkshop
5 жыл бұрын
That’d be great!
Fantastic build, looks awesome!
@craftedworkshop
5 жыл бұрын
Dinusha Chandratilleke thanks!
This looks great!! The only addition I would do is to install a couple of 12v 8Ah batteries and charger so you can make it a portable great looking boombox! It will require some additional electronics to convert 110v to 12v, to measure charge and stop charging when full... but I think it would be totally worth it!
@tjm3900
Жыл бұрын
I use 18v power tool batteries in a reciver shoe, then step that down to 12v for a class 'D' amp.
Parts Express is amazing. Awesome build.
@craftedworkshop
5 жыл бұрын
James Foskey yup, they’ve got everything for this type of build, so many options! Thanks!
Funny, I just started the same build. Thought I was being ingenious. Love the way yours turned you!
@craftedworkshop
5 жыл бұрын
Thanks!
Dude how did you do a boombox video and not get at least one shot channeling your inner early 90's and have it on your shoulder?! Great project! Nice to see your progression on here from the early days. Keep it up!
@craftedworkshop
5 жыл бұрын
Thanks a lot James!
really loved that project. Greetings from Greece
@craftedworkshop
5 жыл бұрын
Κωνσταντίνος Βλαχογιαννάτος thanks, that’s awesome!
Verry cool project! Great job!
@craftedworkshop
5 жыл бұрын
Dutch shed woodshop thanks!
That turned out amazing!
@craftedworkshop
5 жыл бұрын
Jess Peterson thanks Jess!
Wow! That speaker turned out beautiful!
@craftedworkshop
4 жыл бұрын
Thanks!
Dang!!! Hope this is under the tree for your Mama this year. Love it!!!
@craftedworkshop
5 жыл бұрын
😂
That was work over there bro. Good job
That's beautiful. Nice job. I subscribed just now. Thanks!
My daughter and I build a set of c-notes. I recognized them in your thumbnail haha. That box must sound awesome, the c-notes are great. The only downside is that you're missing the great imaging these speakers have by putting them so close together.
@craftedworkshop
5 жыл бұрын
Have Drone Will Travel that’s funny! And yea, it sounds great but I’m definitely not getting as much separation as keeping them separate.
@1QKGLH
5 жыл бұрын
I'm still blown away when I hear the c-note. That's the best sounding $100 you can spend I think. And this box, in walnut, it looks as good as it sounds.
@toddzino58
5 жыл бұрын
Yup, the C-Notes are known for their incredible imaging (for the $$.) Almost a waste to use them in this application. I bet they still sound good. I do wonder if a cheaper set of drivers would work well in this boom box. Worth researching if I build one.
I think this looks amazing!
@craftedworkshop
5 жыл бұрын
red12287 thanks!
Good job man looks great
@craftedworkshop
5 жыл бұрын
John Grech thanks John!
This one was worth the wait! Gorgeous speaker build Johnny!
@craftedworkshop
5 жыл бұрын
Modustrial Maker thanks Mike!
The videos you make are very interesting. I need to learn a lot from you
Man that turned out awesome!
@craftedworkshop
5 жыл бұрын
John Miller thanks John!
That is very beautiful and elegant boombox! What I not understood, was the trick for jointing the glue edges. Any additonal explanations you can give, very appreciate. Thanks a lot.
@craftedworkshop
5 жыл бұрын
Hey Sergio, go check out Jay’s video, he explains it really well! kzread.info/dash/bejne/k6GnpM16f7vQmZc.html
looks great
@craftedworkshop
5 жыл бұрын
Sacha Hächler thanks Sacha!
It's Shawn Spencer (James Roday- rodriguez) "I've heard it both ways" Thanks for the tutorial bud. Keep up the good work!
Awesome job! I'm looking to do a similar design utilizing 2 Tang Band W5-1138SMF subwoofers.
Need to make a Bluetooth speaker so I can listen to some music in the workshop. Your boom box looks nice
Would have been nice to see an in depth section dedicated to the power distribution. The first word in the description is BATTERY and yet you have nothing in the video indicating how you handled that.
@craftedworkshop
5 жыл бұрын
Go check out the blog article. Detailed electronics info is a little dull for video, this amp board is modular and has readily available battery packs that can plug into it. Super simple.
Wonderfull project
@craftedworkshop
5 жыл бұрын
Neil F thanks Neil!
Gorgeous case...great deal on kit, Parts-Express is out until mid-Jan. Speakers and Tweeters alone are $138
@craftedworkshop
5 жыл бұрын
Yea it is a killer deal for sure, and they sound outstanding. Thanks!
wow! I love it!! It came out awesome, dude
@craftedworkshop
5 жыл бұрын
Thanks!
Looks great!
@craftedworkshop
5 жыл бұрын
Thanks!
Beautiful job!
@craftedworkshop
5 жыл бұрын
Thanks!
Is there a cut list for all of the wooden components? Awesome build! Thanks!
Beautiful speaker
@craftedworkshop
5 жыл бұрын
Thanks!
Great job bo❤
Nice work Johnny! that turned out very nice Thank you for sharing the video with us.👍😎JP
@craftedworkshop
5 жыл бұрын
Thanks a lot!
@IEnjoyCreatingVideos
5 жыл бұрын
Your very welcome Johnny! 😎
😎That is a sweet looking bomb box 📻🎶
@craftedworkshop
5 жыл бұрын
Crafter Maker thanks!
Your shop is crazy! Good work
@craftedworkshop
5 жыл бұрын
Thanks!
Very simple if you have the tools you need
Sir you are my fav youtuber😘
Nice build
@craftedworkshop
5 жыл бұрын
Ziyaad Docrat thanks!
The walnut makes it pop!
Really cool Johnny! 👍🏻📻👊🏻
@craftedworkshop
5 жыл бұрын
Fred McIntyre thanks Fred!
@reforzar
5 жыл бұрын
Fred McIntyre 🎵🎶
How many incredible machines do you have?
Very good job, it looks perfect ; -
@craftedworkshop
5 жыл бұрын
Thanks!
Love it!!
@craftedworkshop
5 жыл бұрын
Brandon Lowe thanks Brandon!
Nice job! Looks like a Klipsch meets Marshal vintage speaker!
@craftedworkshop
5 жыл бұрын
Dan Conlan thanks!
@danconlan8735
5 жыл бұрын
Crafted Workshop do you mind telling me how much the speaker,amp,batteries cost? Thanks, DC
@craftedworkshop
5 жыл бұрын
Links to all of the parts are in the video description!
Dude, this is an awesome build. One of my personal favs for sure. Question, if you were to sell it, what would you sell it for? Given everything: your time, labour, materials, etc.? Genuinely curious what price you would put on this.
I love a good speaker build! Is this something that you will do more of in the future?
@craftedworkshop
5 жыл бұрын
Roman Dziennik definitely!